Package: initramfs-tools; Maintainer for initramfs-tools is Debian kernel team <debian-kernel@lists.debian.org>; Source for initramfs-tools is src:initramfs-tools (PTS, buildd, popcon).
Reported by: Ryutaroh Matsumoto <ryutaroh@ict.e.titech.ac.jp>
Date: Sat, 19 Dec 2020 01:33:02 UTC
Severity: important
Tags: bullseye, fixed-upstream, patch, pending
Found in version initramfs-tools/0.139
Fixed in version initramfs-tools/0.140
Done: Salvatore Bonaccorso <carnil@debian.org>
Bug is archived. No further changes may be made.
View this report as an mbox folder, status mbox, maintainer mbox
Report forwarded
to debian-bugs-dist@lists.debian.org, Debian Kernel Team <debian-kernel@lists.debian.org>:
Bug#977694; Package linux-image-5.10.0-trunk-arm64-unsigned.
(Sat, 19 Dec 2020 01:33:03 GMT) (full text, mbox, link).
Acknowledgement sent
to Ryutaroh Matsumoto <ryutaroh@ict.e.titech.ac.jp>:
New Bug report received and forwarded. Copy sent to Debian Kernel Team <debian-kernel@lists.debian.org>.
(Sat, 19 Dec 2020 01:33:04 GMT) (full text, mbox, link).
Message #5 received at submit@bugs.debian.org (full text, mbox, reply):
Package: linux-image-5.10.0-trunk-arm64-unsigned
Version: 5.10.1-1~exp1
Severity: grave
Justification: renders package unusable
Dear Debian kernel maintainers,
This is somewhat similar to
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=977645
but I assume this is a different issue as booting stops at a different point.
Debian kernel 5.10.1 in experimental does not boot on my raspberry pi 4.
I tried to boot it from an usb-msd (not an SD card) with ext4 root partition.
Partitioining is gpt (not msdos). btrfs is blacklisted.
Booting succeeds with Debian kernel 5.9.x.
lsusb -v of the usb bsd is shown at the bottom.
Photo of boot console is found at
https://photos.app.goo.gl/WAY2NgXpFsudNQ5CA
Best regards, Ryutaroh Matsumoto
Bus 002 Device 003: ID 056e:6a13 Elecom Co., Ltd ESD-EMN
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.20
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 9
idVendor 0x056e Elecom Co., Ltd
idProduct 0x6a13
bcdDevice 11.00
iManufacturer 1 ELECOM
iProduct 2 ESD-EMN
iSerial 3 20B10164305600A9
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0079
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 504mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 8
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 8
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 4
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 98
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 8
MaxStreams 4
Data-out pipe (0x04)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 8
MaxStreams 4
Data-in pipe (0x03)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Command pipe (0x01)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 8
MaxStreams 4
Status pipe (0x02)
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 0x0016
bNumDeviceCaps 2
USB 2.0 Extension Device Capability:
bLength 7
bDescriptorType 16
bDevCapabilityType 2
bmAttributes 0x00000002
HIRD Link Power Management (LPM) Supported
SuperSpeed USB Device Capability:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x00
wSpeedsSupported 0x000c
Device can operate at High Speed (480Mbps)
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 2
Lowest fully-functional device speed is High Speed (480Mbps)
bU1DevExitLat 4 micro seconds
bU2DevExitLat 4 micro seconds
Device Status: 0x000c
(Bus Powered)
U1 Enabled
U2 Enabled
Bug reassigned from package 'linux-image-5.10.0-trunk-arm64-unsigned' to 'src:linux'.
Request was from Ben Hutchings <benh@debian.org>
to control@bugs.debian.org.
(Wed, 30 Dec 2020 02:57:03 GMT) (full text, mbox, link).
No longer marked as found in versions linux/5.10.1-1~exp1.
Request was from Ben Hutchings <benh@debian.org>
to control@bugs.debian.org.
(Wed, 30 Dec 2020 02:57:04 GMT) (full text, mbox, link).
Marked as found in versions linux/5.10.1-1~exp1.
Request was from Ben Hutchings <benh@debian.org>
to control@bugs.debian.org.
(Wed, 30 Dec 2020 02:57:05 GMT) (full text, mbox, link).
Changed Bug title to '5.10 boot hang on Raspberry Pi 4 with ext4 rootfs and usb-msd' from '5.10.1 Debian kernel does not boot on raspi 4 with ext4 rootfs and usb-msd'.
Request was from Ben Hutchings <benh@debian.org>
to control@bugs.debian.org.
(Wed, 30 Dec 2020 02:57:05 GMT) (full text, mbox, link).
Severity set to 'important' from 'grave'
Request was from Ben Hutchings <benh@debian.org>
to control@bugs.debian.org.
(Wed, 30 Dec 2020 02:57:06 GMT) (full text, mbox, link).
Information forwarded
to debian-bugs-dist@lists.debian.org, Debian Kernel Team <debian-kernel@lists.debian.org>:
Bug#977694; Package src:linux.
(Mon, 04 Jan 2021 02:03:02 GMT) (full text, mbox, link).
Acknowledgement sent
to Ryutaroh Matsumoto <ryutaroh@ict.e.titech.ac.jp>:
Extra info received and forwarded to list. Copy sent to Debian Kernel Team <debian-kernel@lists.debian.org>.
(Mon, 04 Jan 2021 02:03:02 GMT) (full text, mbox, link).
Message #20 received at 977694@bugs.debian.org (full text, mbox, reply):
Control: reassign -1 linux-image-5.10.0-1-arm64 5.10.4-1 Control: retitle -1 5.10.4 Debian kernel does not boot on raspi 4 with ext4 rootfs and usb-msd I checked the reported symptom with linux-image-5.10.0-1-arm64 5.10.4-1 The symptom remains the same, unlike https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=977645 I have checked the symptom with two usb msds, one is hdd and the other is ssd. Ryutaroh
Bug reassigned from package 'src:linux' to 'linux-image-5.10.0-1-arm64'.
Request was from Ryutaroh Matsumoto <ryutaroh@ict.e.titech.ac.jp>
to 977694-submit@bugs.debian.org.
(Mon, 04 Jan 2021 02:03:03 GMT) (full text, mbox, link).
No longer marked as found in versions linux/5.10.1-1~exp1.
Request was from Ryutaroh Matsumoto <ryutaroh@ict.e.titech.ac.jp>
to 977694-submit@bugs.debian.org.
(Mon, 04 Jan 2021 02:03:03 GMT) (full text, mbox, link).
Marked as found in versions linux-signed-arm64/5.10.4+1.
Request was from Ryutaroh Matsumoto <ryutaroh@ict.e.titech.ac.jp>
to 977694-submit@bugs.debian.org.
(Mon, 04 Jan 2021 02:03:04 GMT) (full text, mbox, link).
Changed Bug title to '5.10.4 Debian kernel does not boot on raspi 4 with ext4 rootfs and usb-msd' from '5.10 boot hang on Raspberry Pi 4 with ext4 rootfs and usb-msd'.
Request was from Ryutaroh Matsumoto <ryutaroh@ict.e.titech.ac.jp>
to 977694-submit@bugs.debian.org.
(Mon, 04 Jan 2021 02:03:04 GMT) (full text, mbox, link).
Bug reassigned from package 'linux-image-5.10.0-1-arm64' to 'src:linux'.
Request was from Salvatore Bonaccorso <carnil@debian.org>
to control@bugs.debian.org.
(Mon, 04 Jan 2021 19:51:03 GMT) (full text, mbox, link).
No longer marked as found in versions linux-signed-arm64/5.10.4+1.
Request was from Salvatore Bonaccorso <carnil@debian.org>
to control@bugs.debian.org.
(Mon, 04 Jan 2021 19:51:03 GMT) (full text, mbox, link).
Information forwarded
to debian-bugs-dist@lists.debian.org, Debian Kernel Team <debian-kernel@lists.debian.org>:
Bug#977694; Package src:linux.
(Mon, 18 Jan 2021 08:18:02 GMT) (full text, mbox, link).
Acknowledgement sent
to Ryutaroh Matsumoto <ryutaroh@ict.e.titech.ac.jp>:
Extra info received and forwarded to list. Copy sent to Debian Kernel Team <debian-kernel@lists.debian.org>.
(Mon, 18 Jan 2021 08:18:02 GMT) (full text, mbox, link).
Message #37 received at 977694@bugs.debian.org (full text, mbox, reply):
Control: tags -1 + fixed-upstream I compiled the upstream kernel 5.10.8, and it boots well from a USB MSD. 5.10.6 and older seem unable to find any USB device connected to Raspberry Pi 4B 8GB, and 5.10.8 seems to have no problem with USB on Raspberry Pi 4B 8GB. Ryutaroh Matsumoto
Added tag(s) fixed-upstream.
Request was from Ryutaroh Matsumoto <ryutaroh@ict.e.titech.ac.jp>
to 977694-submit@bugs.debian.org.
(Mon, 18 Jan 2021 08:18:03 GMT) (full text, mbox, link).
Information forwarded
to debian-bugs-dist@lists.debian.org, Debian Kernel Team <debian-kernel@lists.debian.org>:
Bug#977694; Package src:linux.
(Fri, 22 Jan 2021 10:51:02 GMT) (full text, mbox, link).
Acknowledgement sent
to Ryutaroh Matsumoto <ryutaroh@ict.e.titech.ac.jp>:
Extra info received and forwarded to list. Copy sent to Debian Kernel Team <debian-kernel@lists.debian.org>.
(Fri, 22 Jan 2021 10:51:02 GMT) (full text, mbox, link).
Message #44 received at 977694@bugs.debian.org (full text, mbox, reply):
[Message part 1 (text/plain, inline)]
Control: found -1 5.10.9-1 Hi Salvatore, thank you very much for your attention! From: Salvatore Bonaccorso <carnil@debian.org> Subject: Re: Bug#979187: 979187 is fixed-upstream Date: Thu, 21 Jan 2021 11:34:13 +0100 > 5.10.9-1 is awaiting currently in NEW for beeing processed. Once that > enters unstable, can you please check with it, and if so then close > this bug with the respective version? I do not observe 977694 nor 979187 on my self-compiled kernel, but 977694 & 979187 remain in 5.10.9-1... Strange... The photo of booting failure is at https://photos.app.goo.gl/QFD1ZAept3Ks7wP66 When the booting device is USB-MSD and the kernel tries to mount the root partition, it has not yet recognized any USB device, and fails to mount the root partition. As such, my USB keyboard does not work, neither. On the other hand, my compiled kernel somehow recognize USB devices even when the booting device is a USB MSD. Its dmesg is attached to this email. Disk images of USB-MSD are made by slightly modified version of https://github.com/emojifreak/debian-rpi-image-script Only the kernel package is changed. My kernel .config is http://153.240.174.134:64193/kernel-deb-5.9/config-arm64-5.10.9.txt Best regards, Ryutaroh Matsumoto
[dmesg.txt (text/plain, inline)]
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083] [ 0.000000] Linux version 5.10.9 (root@raspi4b8gb) (gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.1) #1 SMP Fri Jan 22 10:00:50 JST 2021 [ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.4 [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000037000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000001ffffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x1ff016b00-0x1ff018fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff] [ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b2fffff] [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000001ffffffff] [ 0.000000] Zeroed struct page in unavailable ranges: 256 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff] [ 0.000000] On node 0 totalpages: 2061056 [ 0.000000] DMA zone: 3788 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 242432 pages, LIFO batch:63 [ 0.000000] DMA32 zone: 12288 pages used for memmap [ 0.000000] DMA32 zone: 770048 pages, LIFO batch:63 [ 0.000000] Normal zone: 16384 pages used for memmap [ 0.000000] Normal zone: 1048576 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 33 pages/cpu s95192 r8192 d31784 u135168 [ 0.000000] pcpu-alloc: s95192 r8192 d31784 u135168 alloc=33*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: EL2 vector hardening [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2028596 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: dma.dmachans=0x37f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0x488d2af3 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=DC:A6:32:BB:99:D9 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 root=LABEL=RASPIROOT rw fsck.repair=yes net.ifnames=0 rootwait [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x0000000033000000-0x0000000037000000] (64MB) [ 0.000000] Memory: 4919276K/8244224K available (9664K kernel code, 2424K rwdata, 3528K rodata, 5312K init, 587K bss, 274288K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x48/0x404 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 39727 entries in 156 pages [ 0.000000] ftrace: allocated 156 pages with 4 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000007] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000230] Console: colour dummy device 80x25 [ 0.000825] printk: console [tty0] enabled [ 0.000981] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000) [ 0.001018] pid_max: default: 32768 minimum: 301 [ 0.001224] LSM: Security Framework initializing [ 0.001288] Yama: becoming mindful. [ 0.001445] AppArmor: AppArmor initialized [ 0.001470] TOMOYO Linux initialized [ 0.001680] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.001799] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005091] rcu: Hierarchical SRCU implementation. [ 0.008470] EFI services will not be available. [ 0.009233] smp: Bringing up secondary CPUs ... [ 0.010182] Detected PIPT I-cache on CPU1 [ 0.010267] CPU1: Booted secondary processor 0x0000000001 [0x410fd083] [ 0.011354] Detected PIPT I-cache on CPU2 [ 0.011413] CPU2: Booted secondary processor 0x0000000002 [0x410fd083] [ 0.012603] Detected PIPT I-cache on CPU3 [ 0.012665] CPU3: Booted secondary processor 0x0000000003 [0x410fd083] [ 0.012821] smp: Brought up 1 node, 4 CPUs [ 0.012907] SMP: Total of 4 processors activated. [ 0.012927] CPU features: detected: 32-bit EL0 Support [ 0.012946] CPU features: detected: CRC32 instructions [ 0.012965] CPU features: detected: 32-bit EL1 Support [ 0.015873] CPU: All CPU(s) started at EL2 [ 0.015926] alternatives: patching kernel code [ 0.196962] node 0 deferred pages initialised in 176ms [ 0.199773] devtmpfs: initialized [ 0.211034] Registered cp15_barrier emulation handler [ 0.211081] Registered setend emulation handler [ 0.211120] KASLR enabled [ 0.211553] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.211659] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.214357] pinctrl core: initialized pinctrl subsystem [ 0.215376] DMI not present or invalid. [ 0.216287] NET: Registered protocol family 16 [ 0.218595] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.218897] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.219562] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.219641] audit: initializing netlink subsys (disabled) [ 0.219990] audit: type=2000 audit(0.216:1): state=initialized audit_enabled=0 res=1 [ 0.221581] thermal_sys: Registered thermal governor 'fair_share' [ 0.221591] thermal_sys: Registered thermal governor 'step_wise' [ 0.221907] cpuidle: using governor ladder [ 0.221972] cpuidle: using governor menu [ 0.222270] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.222452] ASID allocator initialised with 32768 entries [ 0.223624] Serial: AMBA PL011 UART driver [ 0.258805] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.258846] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.258867] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.258887] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.966865] ACPI: Interpreter disabled. [ 0.967270] iommu: Default domain type: Translated [ 0.967652] vgaarb: loaded [ 0.968221] EDAC MC: Ver: 3.0.0 [ 0.970170] NetLabel: Initializing [ 0.970196] NetLabel: domain hash size = 128 [ 0.970212] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.970314] NetLabel: unlabeled traffic allowed by default [ 0.970948] clocksource: Switched to clocksource arch_sys_counter [ 1.071169] VFS: Disk quotas dquot_6.6.0 [ 1.071293] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.072456] AppArmor: AppArmor Filesystem Enabled [ 1.073597] simple-framebuffer 3e196000.framebuffer: framebuffer at 0x3e196000, 0x960000 bytes, mapped to 0x(____ptrval____) [ 1.073633] simple-framebuffer 3e196000.framebuffer: format=a8r8g8b8, mode=1920x1280x32, linelength=7680 [ 1.100467] Console: switching to colour frame buffer device 240x80 [ 1.126455] simple-framebuffer 3e196000.framebuffer: fb0: simplefb registered! [ 1.126690] pnp: PnP ACPI: disabled [ 1.139760] NET: Registered protocol family 2 [ 1.140871] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 1.141585] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.142898] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 1.143890] TCP: Hash tables configured (established 65536 bind 65536) [ 1.144582] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.144936] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.145465] NET: Registered protocol family 1 [ 1.145587] NET: Registered protocol family 44 [ 1.145688] PCI: CLS 0 bytes, default 64 [ 1.146121] Trying to unpack rootfs image as initramfs... [ 3.287297] Freeing initrd memory: 26436K [ 3.289009] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available [ 3.289358] kvm [1]: IPA Size Limit: 44 bits [ 3.290702] kvm [1]: vgic interrupt IRQ9 [ 3.291137] kvm [1]: Hyp mode initialized successfully [ 3.293488] Initialise system trusted keyrings [ 3.293626] Key type blacklist registered [ 3.294018] workingset: timestamp_bits=42 max_order=21 bucket_order=0 [ 3.303037] zbud: loaded [ 3.304183] integrity: Platform Keyring initialized [ 3.304295] Key type asymmetric registered [ 3.304379] Asymmetric key parser 'x509' registered [ 3.304522] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 3.305024] io scheduler mq-deadline registered [ 3.305119] io scheduler kyber registered [ 3.305366] io scheduler bfq registered [ 3.313730] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 3.314767] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 3.314912] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] [ 3.315125] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x0603ffffff -> 0x00f8000000 [ 3.315302] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000 [ 3.381050] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) [ 3.381444] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 3.381574] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.381685] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff]) [ 3.381916] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [ 3.382116] pci 0000:00:00.0: PME# supported from D0 D3hot [ 3.385158] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [ 3.385336] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 3.385636] pci 0000:01:00.0: PME# supported from D0 D3hot [ 3.397361] pci 0000:00:00.0: BAR 14: assigned [mem 0x600000000-0x6000fffff] [ 3.397510] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [ 3.397663] pci 0000:00:00.0: PCI bridge to [bus 01] [ 3.397764] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 3.398141] pcieport 0000:00:00.0: enabling device (0000 -> 0002) [ 3.398454] pcieport 0000:00:00.0: PME: Signaling with IRQ 50 [ 3.399059] pcieport 0000:00:00.0: AER: enabled with IRQ 50 [ 3.413207] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.416277] fe215040.serial: ttyS1 at MMIO 0xfe215040 (irq = 26, base_baud = 33402922) is a 16550 [ 4.456705] printk: console [ttyS1] enabled [ 4.462512] Serial: AMBA driver [ 4.466193] msm_serial: driver initialized [ 4.478037] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 4.491521] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 4.506384] mousedev: PS/2 mouse device common for all mice [ 4.519833] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode [ 4.533530] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode [ 4.548848] ledtrig-cpu: registered to indicate activity on CPUs [ 4.562071] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 4.576469] NET: Registered protocol family 10 [ 4.635742] Segment Routing with IPv6 [ 4.646028] mip6: Mobile IPv6 [ 4.655412] NET: Registered protocol family 17 [ 4.666558] mpls_gso: MPLS GSO support [ 4.677486] registered taskstats version 1 [ 4.688093] Loading compiled-in X.509 certificates [ 4.865561] Loaded X.509 cert 'Build time autogenerated kernel key: 079f19932192107b3224145c57876ea2e4aa83a0' [ 4.882453] zswap: loaded using pool lzo/zbud [ 4.894185] Key type ._fscrypt registered [ 4.904802] Key type .fscrypt registered [ 4.915261] Key type fscrypt-provisioning registered [ 4.927049] AppArmor: AppArmor sha1 policy hashing enabled [ 4.947285] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 24, base_baud = 0) is a PL011 rev2 [ 4.963162] serial serial0: tty port ttyAMA0 registered [ 4.978450] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-01-07T18:27:29 [ 5.170766] Freeing unused kernel memory: 5312K [ 5.312043] Checked W+X mappings: passed, no W+X pages found [ 5.324360] Run /init as init process [ 5.334497] with arguments: [ 5.334505] /init [ 5.334512] with environment: [ 5.334519] HOME=/ [ 5.334526] TERM=linux [ 5.766281] fixed: module verification failed: signature and/or required key missing - tainting kernel [ 5.784715] sdhci: Secure Digital Host Controller Interface driver [ 5.797789] sdhci: Copyright(c) Pierre Ossman [ 5.805101] usb_phy_generic phy: supply vcc not found, using dummy regulator [ 5.824642] sdhci-pltfm: SDHCI platform and OF driver helper [ 5.838601] libphy: Fixed MDIO Bus: probed [ 5.840631] usbcore: registered new interface driver usbfs [ 5.852500] sdhci-iproc fe300000.sdhci: allocated mmc-pwrseq [ 5.861687] usbcore: registered new interface driver hub [ 5.886620] usbcore: registered new device driver usb [ 5.890217] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [ 5.923059] mmc1: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA [ 5.965127] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 5.977335] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 5.979073] mmc0: SDHCI controller on fe300000.sdhci [fe300000.sdhci] using PIO [ 5.992271] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000000000000890 [ 6.007896] dwc2 fe980000.usb: supply vusb_d not found, using dummy regulator [ 6.019083] libphy: bcmgenet MII bus: probed [ 6.022810] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.027042] mmc0: queuing unknown CIS tuple 0x80 (2 bytes) [ 6.028833] mmc0: queuing unknown CIS tuple 0x80 (3 bytes) [ 6.030632] mmc0: queuing unknown CIS tuple 0x80 (3 bytes) [ 6.034023] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 6.035891] dwc2 fe980000.usb: supply vusb_a not found, using dummy regulator [ 6.039490] mmc0: queuing unknown CIS tuple 0x80 (3 bytes) [ 6.046496] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.076823] mmc1: new ultra high speed DDR50 SDHC card at address 0007 [ 6.086318] usb usb1: Product: xHCI Host Controller [ 6.099147] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [ 6.100017] mmcblk1: mmc1:0007 SD32G 29.0 GiB [ 6.110695] usb usb1: Manufacturer: Linux 5.10.9 xhci-hcd [ 6.110702] usb usb1: SerialNumber: 0000:01:00.0 [ 6.111672] hub 1-0:1.0: USB hub found [ 6.126738] mmcblk1: p1 [ 6.136988] hub 1-0:1.0: 1 port detected [ 6.158308] random: fast init done [ 6.165405] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 6.176085] dwc2 fe980000.usb: EPs: 8, dedicated fifos, 4080 entries in SPRAM [ 6.188910] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 6.221144] mmc0: new high speed SDIO card at address 0001 [ 6.223789] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 6.329608] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.344789] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.358893] usb usb2: Product: xHCI Host Controller [ 6.370571] usb usb2: Manufacturer: Linux 5.10.9 xhci-hcd [ 6.382794] usb usb2: SerialNumber: 0000:01:00.0 [ 6.395245] hub 2-0:1.0: USB hub found [ 6.405992] hub 2-0:1.0: 4 ports detected [ 6.550955] raid6: neonx8 gen() 1695 MB/s [ 6.626945] raid6: neonx8 xor() 1201 MB/s [ 6.702940] raid6: neonx4 gen() 1747 MB/s [ 6.778946] raid6: neonx4 xor() 1295 MB/s [ 6.854946] raid6: neonx2 gen() 1538 MB/s [ 6.930940] raid6: neonx2 xor() 1192 MB/s [ 7.006939] raid6: neonx1 gen() 1172 MB/s [ 7.082944] raid6: neonx1 xor() 949 MB/s [ 7.158970] raid6: int64x8 gen() 486 MB/s [ 7.234949] raid6: int64x8 xor() 287 MB/s [ 7.310947] raid6: int64x4 gen() 555 MB/s [ 7.386945] raid6: int64x4 xor() 298 MB/s [ 7.462947] raid6: int64x2 gen() 920 MB/s [ 7.538967] raid6: int64x2 xor() 361 MB/s [ 7.614959] raid6: int64x1 gen() 696 MB/s [ 7.690939] raid6: int64x1 xor() 239 MB/s [ 7.701111] raid6: using algorithm neonx4 gen() 1747 MB/s [ 7.712459] raid6: .... xor() 1295 MB/s, rmw enabled [ 7.723373] raid6: using neon recovery algorithm [ 7.736134] xor: measuring software checksum speed [ 7.751265] 8regs : 2233 MB/sec [ 7.765298] 32regs : 2522 MB/sec [ 7.779456] arm64_neon : 2433 MB/sec [ 7.789540] xor: using function: 32regs (2522 MB/sec) [ 7.790983] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 7.888019] Btrfs loaded, crc32c=crc32c-generic [ 7.965695] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 [ 7.979817] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 7.992805] usb 1-1: Product: USB2.0 Hub [ 8.004443] hub 1-1:1.0: USB hub found [ 8.014162] hub 1-1:1.0: 4 ports detected [ 8.095361] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 8.129173] usb 2-2: New USB device found, idVendor=056e, idProduct=6a13, bcdDevice=11.00 [ 8.143121] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 8.155987] usb 2-2: Product: ESD-EMN [ 8.165257] usb 2-2: Manufacturer: ELECOM [ 8.174784] usb 2-2: SerialNumber: 20B10164305600A9 [ 8.331609] SCSI subsystem initialized [ 8.346525] usbcore: registered new interface driver usb-storage [ 8.368016] scsi host0: uas [ 8.370981] usb 1-1.3: new low-speed USB device number 3 using xhci_hcd [ 8.377130] usbcore: registered new interface driver uas [ 8.505540] usb 1-1.3: New USB device found, idVendor=15ca, idProduct=00c3, bcdDevice= 5.12 [ 8.519598] usb 1-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 8.532503] usb 1-1.3: Product: USB Optical Mouse [ 8.561831] hid: raw HID events driver (C) Jiri Kosina [ 8.582146] usbcore: registered new interface driver usbhid [ 8.593268] usbhid: USB HID core driver [ 8.611355] input: USB Optical Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:15CA:00C3.0001/input/input0 [ 8.631001] usb 1-1.4: new low-speed USB device number 4 using xhci_hcd [ 8.633070] hid-generic 0003:15CA:00C3.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:01:00.0-1.3/input0 [ 8.774979] usb 1-1.4: New USB device found, idVendor=1a2c, idProduct=4324, bcdDevice= 1.10 [ 8.789314] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.802599] usb 1-1.4: Product: USB Keyboard [ 8.812819] usb 1-1.4: Manufacturer: SEM [ 8.831985] input: SEM USB Keyboard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:1A2C:4324.0002/input/input1 [ 8.911784] hid-generic 0003:1A2C:4324.0002: input,hidraw1: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-0000:01:00.0-1.4/input0 [ 8.935773] input: SEM USB Keyboard Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:1A2C:4324.0003/input/input2 [ 8.993230] scsi 0:0:0:0: Direct-Access ELECOM ESD-EMN 1100 PQ: 0 ANSI: 6 [ 9.019298] input: SEM USB Keyboard System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:1A2C:4324.0003/input/input3 [ 9.043225] hid-generic 0003:1A2C:4324.0003: input,hidraw2: USB HID v1.10 Device [SEM USB Keyboard] on usb-0000:01:00.0-1.4/input1 [ 9.071928] sd 0:0:0:0: [sda] 1954713600 512-byte logical blocks: (1.00 TB/932 GiB) [ 9.087001] sd 0:0:0:0: [sda] Write Protect is off [ 9.098785] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 9.099323] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 9.117980] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes [ 9.156681] sda: sda1 sda2 sda3 [ 9.175544] sd 0:0:0:0: [sda] Attached SCSI disk [ 37.610420] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 37.876613] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 38.084175] systemd[1]: System time before build time, advancing clock. [ 38.139399] systemd[1]: Inserted module 'autofs4' [ 38.198034] systemd[1]: systemd 247.2-5 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 38.236412] systemd[1]: Detected architecture arm64. [ 38.268223] systemd[1]: Set hostname to <raspi4b8gb>. [ 38.769432] systemd[1]: Queued start job for default target Graphical Interface. [ 38.785771] random: systemd: uninitialized urandom read (16 bytes read) [ 38.805011] systemd[1]: Created slice system-getty.slice. [ 38.835201] random: systemd: uninitialized urandom read (16 bytes read) [ 38.851598] systemd[1]: Created slice system-modprobe.slice. [ 38.879220] random: systemd: uninitialized urandom read (16 bytes read) [ 38.896047] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 38.929090] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 38.960826] systemd[1]: Created slice User and Session Slice. [ 38.991662] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 39.027546] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 39.064247] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 39.099380] systemd[1]: Reached target Local Encrypted Volumes. [ 39.131317] systemd[1]: Reached target Paths. [ 39.159197] systemd[1]: Reached target Remote File Systems. [ 39.187162] systemd[1]: Reached target Slices. [ 39.219085] systemd[1]: Listening on Syslog Socket. [ 39.247930] systemd[1]: Listening on fsck to fsckd communication Socket. [ 39.279534] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 39.312163] systemd[1]: Listening on Journal Audit Socket. [ 39.343858] systemd[1]: Listening on Journal Socket (/dev/log). [ 39.376012] systemd[1]: Listening on Journal Socket. [ 39.404219] systemd[1]: Listening on udev Control Socket. [ 39.435800] systemd[1]: Listening on udev Kernel Socket. [ 39.473027] systemd[1]: Mounting Huge Pages File System... [ 39.510096] systemd[1]: Mounting POSIX Message Queue File System... [ 39.548986] systemd[1]: Mounting Kernel Debug File System... [ 39.585625] systemd[1]: Mounting Kernel Trace File System... [ 39.621807] systemd[1]: Starting Restore / save the current clock... [ 39.657330] systemd[1]: Starting Set the console keyboard layout... [ 39.693685] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 39.733724] systemd[1]: Starting Load Kernel Module configfs... [ 39.769468] systemd[1]: Starting Load Kernel Module drm... [ 39.809778] systemd[1]: Starting Load Kernel Module fuse... [ 39.834065] fuse: init (API version 7.32) [ 39.845549] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 39.864032] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 39.891608] systemd[1]: Starting Journal Service... [ 39.928110] systemd[1]: Starting Load Kernel Modules... [ 39.961954] systemd[1]: Starting Remount Root and Kernel File Systems... [ 40.005707] systemd[1]: Starting Coldplug All udev Devices... [ 40.023139] EXT4-fs (sda2): re-mounted. Opts: discard [ 40.073308] systemd[1]: Mounted Huge Pages File System. [ 40.108085] systemd[1]: Mounted POSIX Message Queue File System. [ 40.140061] systemd[1]: Mounted Kernel Debug File System. [ 40.172073] systemd[1]: Mounted Kernel Trace File System. [ 40.205701] systemd[1]: Finished Restore / save the current clock. [ 40.236742] systemd[1]: Started Journal Service. [ 40.504498] random: crng init done [ 40.516551] random: 7 urandom warning(s) missed due to ratelimiting [ 44.861058] vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 44.898110] iproc-rng200 fe104000.rng: hwrng registered [ 44.940697] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 44.961241] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 45.051169] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 45.069615] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 45.081230] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 45.098634] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 45.131337] cryptd: max_cpu_qlen set to 1000 [ 45.155295] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 45.167775] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 45.168568] usbcore: registered new interface driver brcmfmac [ 45.184374] mc: Linux media interface: v0.10 [ 45.236048] videodev: Linux video capture interface: v2.00 [ 45.265129] debugfs: Directory 'fef00700.hdmi' with parent 'vc4-hdmi-0' already present! [ 45.293857] vc4_hdmi fef00700.hdmi: ASoC: no DMI vendor name! [ 45.295368] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 45.301538] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 45.314300] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4]) [ 45.331077] bcm2835_audio bcm2835_audio: card created with 8 channels [ 45.336526] debugfs: Directory 'fef05700.hdmi' with parent 'vc4-hdmi-1' already present! [ 45.336723] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 45.336816] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available [ 45.337336] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 1 2015 07:29:38 version 7.45.18 (r538002) FWID 01-6a2c8ad4 [ 45.409923] vc4_hdmi fef05700.hdmi: ASoC: no DMI vendor name! [ 45.413789] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4]) [ 45.431659] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 45.441723] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4]) [ 45.441870] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 45.441983] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 45.442076] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 45.442170] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 45.442484] checking generic (3e196000 960000) vs hw (0 ffffffffffffffff) [ 45.442489] fb0: switching to vc4drmfb from simple [ 45.510677] Console: switching to colour dummy device 80x25 [ 45.542206] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 0 [ 45.574228] Bluetooth: Core ver 2.22 [ 45.580317] NET: Registered protocol family 31 [ 45.584903] Bluetooth: HCI device and connection manager initialized [ 45.592099] Bluetooth: HCI socket layer initialized [ 45.592112] Bluetooth: L2CAP socket layer initialized [ 45.592179] Bluetooth: SCO socket layer initialized [ 45.641003] Bluetooth: HCI UART driver ver 2.3 [ 45.641013] Bluetooth: HCI UART protocol H4 registered [ 45.641136] Bluetooth: HCI UART protocol LL registered [ 45.641139] Bluetooth: HCI UART protocol ATH3K registered [ 45.641171] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 45.641354] Bluetooth: HCI UART protocol Intel registered [ 45.641718] Bluetooth: HCI UART protocol Broadcom registered [ 45.641778] Bluetooth: HCI UART protocol QCA registered [ 45.641781] Bluetooth: HCI UART protocol AG6XX registered [ 45.641811] Bluetooth: HCI UART protocol Marvell registered [ 45.650620] Console: switching to colour frame buffer device 240x67 [ 45.651767] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator [ 45.651988] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator [ 45.753131] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device [ 45.781779] uart-pl011 fe201000.serial: no DMA platform data [ 45.812510] FAT-fs (sda1): mounting with "discard" option, but the device does not support discard [ 46.023687] Bluetooth: hci0: BCM: chip id 107 [ 46.026560] Bluetooth: hci0: BCM: features 0x2f [ 46.030720] Bluetooth: hci0: BCM4345C0 [ 46.032989] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000 [ 46.036611] Bluetooth: hci0: BCM: firmware Patch file not found, tried: [ 46.040677] Bluetooth: hci0: BCM: 'brcm/BCM4345C0.hcd' [ 46.040681] Bluetooth: hci0: BCM: 'brcm/BCM.hcd' [ 129.949067] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) [ 129.954152] bcmgenet fd580000.ethernet eth0: Link is Down [ 139.100676] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Marked as found in versions linux/5.10.9-1.
Request was from Ryutaroh Matsumoto <ryutaroh@ict.e.titech.ac.jp>
to 977694-submit@bugs.debian.org.
(Fri, 22 Jan 2021 10:51:03 GMT) (full text, mbox, link).
Information forwarded
to debian-bugs-dist@lists.debian.org, Debian Kernel Team <debian-kernel@lists.debian.org>:
Bug#977694; Package src:linux.
(Sat, 23 Jan 2021 12:09:03 GMT) (full text, mbox, link).
Acknowledgement sent
to Ryutaroh Matsumoto <ryutaroh@ict.e.titech.ac.jp>:
Extra info received and forwarded to list. Copy sent to Debian Kernel Team <debian-kernel@lists.debian.org>.
(Sat, 23 Jan 2021 12:09:03 GMT) (full text, mbox, link).
Message #51 received at 977694@bugs.debian.org (full text, mbox, reply):
[Message part 1 (text/plain, inline)]
>> 5.10.9-1 is awaiting currently in NEW for beeing processed. Once that >> enters unstable, can you please check with it, and if so then close >> this bug with the respective version? > > I do not observe 977694 nor 979187 on my self-compiled kernel, > but 977694 & 979187 remain in 5.10.9-1... Strange... I compiled the upstream kernel source with .config minimally changed (*) from linux-config-5.10/sid, and the symptoms 977694 and 979187 are reproduced. My impression is that raspi4 USB-MSD boot failure can be fixed by properly changing .config. I will investigate what are required changes to the config. (*) "minimal change" means the attached diff. Ryutaroh
[config-diff.txt (text/plain, inline)]
--- config.arm64_none_arm64 2021-01-23 03:49:19.579170266 +0900 +++ linux-5.10.9/.config 2021-01-23 03:50:31.892570954 +0900 @@ -2,7 +2,7 @@ # Automatically generated file; DO NOT EDIT. # Linux/arm64 5.10.9 Kernel Configuration # -CONFIG_CC_VERSION_TEXT="gcc-10 (Debian 10.2.1-6) 10.2.1 20210110" +CONFIG_CC_VERSION_TEXT="gcc (Debian 10.2.1-6) 10.2.1 20210110" CONFIG_CC_IS_GCC=y CONFIG_GCC_VERSION=100201 CONFIG_LD_VERSION=235010000 @@ -23,6 +23,7 @@ # CONFIG_COMPILE_TEST is not set CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set +CONFIG_BUILD_SALT="" CONFIG_DEFAULT_INIT="" CONFIG_DEFAULT_HOSTNAME="(none)" CONFIG_SWAP=y @@ -416,8 +417,6 @@ CONFIG_ARM64_TAGGED_ADDR_ABI=y CONFIG_COMPAT=y CONFIG_KUSER_HELPERS=y -CONFIG_COMPAT_VDSO=y -CONFIG_THUMB2_COMPAT_VDSO=y CONFIG_ARMV8_DEPRECATED=y CONFIG_SWP_EMULATION=y CONFIG_CP15_BARRIER_EMULATION=y @@ -841,6 +840,7 @@ # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_MODULE_SIG=y # CONFIG_MODULE_SIG_FORCE is not set +# CONFIG_MODULE_SIG_ALL is not set # CONFIG_MODULE_SIG_SHA1 is not set # CONFIG_MODULE_SIG_SHA224 is not set CONFIG_MODULE_SIG_SHA256=y @@ -5603,6 +5603,7 @@ # CONFIG_VIDEO_OV9640 is not set # CONFIG_VIDEO_OV9650 is not set # CONFIG_VIDEO_OV13858 is not set +# CONFIG_VIDEO_VS6624 is not set # CONFIG_VIDEO_MT9M001 is not set # CONFIG_VIDEO_MT9M032 is not set # CONFIG_VIDEO_MT9M111 is not set @@ -6156,6 +6157,8 @@ CONFIG_FB_EFI=y # CONFIG_FB_OPENCORES is not set # CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set # CONFIG_FB_I740 is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON is not set @@ -6842,7 +6845,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_SUPPORT=y -CONFIG_USB_COMMON=m +CONFIG_USB_COMMON=y CONFIG_USB_LED_TRIG=y CONFIG_USB_ULPI_BUS=m CONFIG_USB_CONN_GPIO=m @@ -7772,7 +7775,7 @@ # # Android # -CONFIG_ASHMEM=m +# CONFIG_ASHMEM is not set # CONFIG_ION is not set # end of Android @@ -8879,10 +8882,7 @@ # Android # CONFIG_ANDROID=y -CONFIG_ANDROID_BINDER_IPC=m -# CONFIG_ANDROID_BINDERFS is not set -CONFIG_ANDROID_BINDER_DEVICES="binder" -# CONFIG_ANDROID_BINDER_IPC_SELFTEST is not set +# CONFIG_ANDROID_BINDER_IPC is not set # end of Android CONFIG_LIBNVDIMM=m @@ -9072,6 +9072,9 @@ CONFIG_FAT_DEFAULT_UTF8=y CONFIG_EXFAT_FS=m CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +# CONFIG_NTFS_RW is not set # end of DOS/FAT/EXFAT/NT Filesystems # @@ -9334,7 +9337,6 @@ # CONFIG_ENCRYPTED_KEYS is not set CONFIG_KEY_DH_OPERATIONS=y CONFIG_SECURITY_DMESG_RESTRICT=y -CONFIG_SECURITY_PERF_EVENTS_RESTRICT=y CONFIG_SECURITY=y CONFIG_SECURITYFS=y CONFIG_SECURITY_NETWORK=y @@ -9376,7 +9378,6 @@ CONFIG_LOCK_DOWN_KERNEL_FORCE_NONE=y # CONFIG_LOCK_DOWN_KERNEL_FORCE_INTEGRITY is not set # CONFIG_LOCK_DOWN_KERNEL_FORCE_CONFIDENTIALITY is not set -CONFIG_LOCK_DOWN_IN_EFI_SECURE_BOOT=y CONFIG_INTEGRITY=y CONFIG_INTEGRITY_SIGNATURE=y CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y @@ -9662,7 +9663,9 @@ # # Certificates for signature checking # +CONFIG_MODULE_SIG_KEY="certs/signing_key.pem" CONFIG_SYSTEM_TRUSTED_KEYRING=y +CONFIG_SYSTEM_TRUSTED_KEYS="" # CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set CONFIG_SECONDARY_TRUSTED_KEYRING=y CONFIG_SYSTEM_BLACKLIST_KEYRING=y @@ -9796,7 +9799,6 @@ CONFIG_UCS2_STRING=y CONFIG_HAVE_GENERIC_VDSO=y CONFIG_GENERIC_GETTIMEOFDAY=y -CONFIG_GENERIC_COMPAT_VDSO=y CONFIG_GENERIC_VDSO_TIME_NS=y CONFIG_FONT_SUPPORT=y CONFIG_FONTS=y
Information forwarded
to debian-bugs-dist@lists.debian.org, Debian Kernel Team <debian-kernel@lists.debian.org>:
Bug#977694; Package src:linux.
(Sun, 24 Jan 2021 06:06:03 GMT) (full text, mbox, link).
Acknowledgement sent
to Ryutaroh Matsumoto <ryutaroh@ict.e.titech.ac.jp>:
Extra info received and forwarded to list. Copy sent to Debian Kernel Team <debian-kernel@lists.debian.org>.
(Sun, 24 Jan 2021 06:06:03 GMT) (full text, mbox, link).
Message #56 received at 977694@bugs.debian.org (full text, mbox, reply):
[Message part 1 (text/plain, inline)]
Control: tags -1 + patch > linux-config-5.10/sid, and the symptoms 977694 and 979187 are reproduced. > My impression is that raspi4 USB-MSD boot failure can be fixed by properly > changing .config. I will investigate what are required changes to the config. I identified changes in .config enabling boot of raspi 4B from USB MSD. The following script built a debian kernel package that can boot from (not buggy) USB MSD. Build was done on raspi 4B. #!/bin/bash set -x apt-get source linux/sid cd linux-5.10.9 fakeroot make -f debian/rules.gen setup_arm64_none_arm64 cat >>debian/build/build_arm64_none_arm64/.config <<'EOF' CONFIG_RESET_RASPBERRYPI=y CONFIG_ARM_RASPBERRYPI_CPUFREQ=y CONFIG_SENSORS_RASPBERRYPI_HWMON=y EOF yes | make -C debian/build/build_arm64_none_arm64 oldconfig yes | fakeroot /usr/bin/make -j 12 -f debian/rules.gen binary-arch_arm64_none_arm64 I believe CONFIG_RESET_RASPBERRYPI=y CONFIG_ARM_RASPBERRYPI_CPUFREQ=y CONFIG_SENSORS_RASPBERRYPI_HWMON=y fix 977694. On the other hand, the other issue 979187 remains. I will report the situation of 979187 in a separete email. Best regards, Ryutaroh Matsumoto
[dmesg.txt (text/plain, inline)]
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083] [ 0.000000] Linux version 5.10.0-2-arm64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.1) #1 SMP Debian 5.10.9-1 (2021-01-20) [ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.4 [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000037000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000001ffffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x1ff019b00-0x1ff01bfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff] [ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b2fffff] [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000001ffffffff] [ 0.000000] Zeroed struct page in unavailable ranges: 256 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff] [ 0.000000] On node 0 totalpages: 2061056 [ 0.000000] DMA zone: 3788 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 242432 pages, LIFO batch:63 [ 0.000000] DMA32 zone: 12288 pages used for memmap [ 0.000000] DMA32 zone: 770048 pages, LIFO batch:63 [ 0.000000] Normal zone: 16384 pages used for memmap [ 0.000000] Normal zone: 1048576 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 33 pages/cpu s95192 r8192 d31784 u135168 [ 0.000000] pcpu-alloc: s95192 r8192 d31784 u135168 alloc=33*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: EL2 vector hardening [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2028596 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: dma.dmachans=0x37f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0x488d2af3 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=DC:A6:32:BB:99:D9 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 root=LABEL=RASPIROOT rw fsck.repair=yes net.ifnames=0 rootwait [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x0000000033000000-0x0000000037000000] (64MB) [ 0.000000] Memory: 4911236K/8244224K available (11648K kernel code, 2420K rwdata, 6852K rodata, 5312K init, 588K bss, 282316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x3c/0x590 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 37908 entries in 149 pages [ 0.000000] ftrace: allocated 149 pages with 4 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000006] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000180] Console: colour dummy device 80x25 [ 0.000605] printk: console [tty0] enabled [ 0.000727] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000) [ 0.000756] pid_max: default: 32768 minimum: 301 [ 0.000915] LSM: Security Framework initializing [ 0.000966] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.001104] AppArmor: AppArmor initialized [ 0.001125] TOMOYO Linux initialized [ 0.001308] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.001421] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003930] rcu: Hierarchical SRCU implementation. [ 0.006050] EFI services will not be available. [ 0.006599] smp: Bringing up secondary CPUs ... [ 0.007281] Detected PIPT I-cache on CPU1 [ 0.007355] CPU1: Booted secondary processor 0x0000000001 [0x410fd083] [ 0.008189] Detected PIPT I-cache on CPU2 [ 0.008234] CPU2: Booted secondary processor 0x0000000002 [0x410fd083] [ 0.009053] Detected PIPT I-cache on CPU3 [ 0.009100] CPU3: Booted secondary processor 0x0000000003 [0x410fd083] [ 0.009211] smp: Brought up 1 node, 4 CPUs [ 0.009274] SMP: Total of 4 processors activated. [ 0.009289] CPU features: detected: 32-bit EL0 Support [ 0.009303] CPU features: detected: CRC32 instructions [ 0.009318] CPU features: detected: 32-bit EL1 Support [ 0.032034] CPU: All CPU(s) started at EL2 [ 0.032131] alternatives: patching kernel code [ 0.167788] node 0 deferred pages initialised in 132ms [ 0.170232] devtmpfs: initialized [ 0.177327] Registered cp15_barrier emulation handler [ 0.177368] Registered setend emulation handler [ 0.177397] KASLR enabled [ 0.177732] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.177832] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.179897] pinctrl core: initialized pinctrl subsystem [ 0.180717] DMI not present or invalid. [ 0.181439] NET: Registered protocol family 16 [ 0.183134] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.183389] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.183906] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.183965] audit: initializing netlink subsys (disabled) [ 0.184253] audit: type=2000 audit(0.180:1): state=initialized audit_enabled=0 res=1 [ 0.185498] thermal_sys: Registered thermal governor 'fair_share' [ 0.185507] thermal_sys: Registered thermal governor 'bang_bang' [ 0.185526] thermal_sys: Registered thermal governor 'step_wise' [ 0.185540] thermal_sys: Registered thermal governor 'user_space' [ 0.185553] thermal_sys: Registered thermal governor 'power_allocator' [ 0.185955] cpuidle: using governor ladder [ 0.186142] cpuidle: using governor menu [ 0.186396] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.186528] ASID allocator initialised with 32768 entries [ 0.186952] Serial: AMBA PL011 UART driver [ 0.213789] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.213825] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.213841] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.213856] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.874566] ACPI: Interpreter disabled. [ 0.874857] iommu: Default domain type: Translated [ 0.875182] vgaarb: loaded [ 0.875531] EDAC MC: Ver: 3.0.0 [ 0.877082] NetLabel: Initializing [ 0.877102] NetLabel: domain hash size = 128 [ 0.877114] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.877195] NetLabel: unlabeled traffic allowed by default [ 0.877730] clocksource: Switched to clocksource arch_sys_counter [ 0.949030] VFS: Disk quotas dquot_6.6.0 [ 0.949144] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.950009] AppArmor: AppArmor Filesystem Enabled [ 0.950994] simple-framebuffer 3e196000.framebuffer: framebuffer at 0x3e196000, 0x960000 bytes, mapped to 0x(____ptrval____) [ 0.951022] simple-framebuffer 3e196000.framebuffer: format=a8r8g8b8, mode=1920x1280x32, linelength=7680 [ 0.976736] Console: switching to colour frame buffer device 240x80 [ 1.001885] simple-framebuffer 3e196000.framebuffer: fb0: simplefb registered! [ 1.002088] pnp: PnP ACPI: disabled [ 1.011327] NET: Registered protocol family 2 [ 1.012330] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 1.013013] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.014428] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 1.015303] TCP: Hash tables configured (established 65536 bind 65536) [ 1.015865] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.016210] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.016666] NET: Registered protocol family 1 [ 1.016776] NET: Registered protocol family 44 [ 1.016867] PCI: CLS 0 bytes, default 64 [ 1.017192] Trying to unpack rootfs image as initramfs... [ 3.165892] Freeing initrd memory: 29164K [ 3.167241] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available [ 3.167541] kvm [1]: IPA Size Limit: 44 bits [ 3.169122] kvm [1]: vgic interrupt IRQ9 [ 3.169379] kvm [1]: Hyp mode initialized successfully [ 3.171228] Initialise system trusted keyrings [ 3.171364] Key type blacklist registered [ 3.171713] workingset: timestamp_bits=42 max_order=21 bucket_order=0 [ 3.177881] zbud: loaded [ 3.178765] integrity: Platform Keyring initialized [ 3.178866] Key type asymmetric registered [ 3.178944] Asymmetric key parser 'x509' registered [ 3.179065] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 3.179441] io scheduler mq-deadline registered [ 3.186013] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 3.186864] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 3.187000] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] [ 3.187175] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x0603ffffff -> 0x00f8000000 [ 3.187335] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000 [ 3.251809] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) [ 3.252123] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 3.252241] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.252345] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff]) [ 3.252557] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [ 3.252739] pci 0000:00:00.0: PME# supported from D0 D3hot [ 3.255410] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [ 3.255544] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 3.255766] pci 0000:01:00.0: PME# supported from D0 D3hot [ 3.267880] pci 0000:00:00.0: BAR 14: assigned [mem 0x600000000-0x6000fffff] [ 3.268015] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [ 3.268158] pci 0000:00:00.0: PCI bridge to [bus 01] [ 3.268251] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 3.268549] pcieport 0000:00:00.0: enabling device (0000 -> 0002) [ 3.268803] pcieport 0000:00:00.0: PME: Signaling with IRQ 50 [ 3.269240] pcieport 0000:00:00.0: AER: enabled with IRQ 50 [ 3.280321] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.282573] fe215040.serial: ttyS1 at MMIO 0xfe215040 (irq = 26, base_baud = 33402922) is a 16550 [ 4.338695] printk: console [ttyS1] enabled [ 4.344174] Serial: AMBA driver [ 4.347790] msm_serial: driver initialized [ 4.353200] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 4.360254] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 4.374507] mousedev: PS/2 mouse device common for all mice [ 4.387223] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode [ 4.400448] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode [ 4.414805] ledtrig-cpu: registered to indicate activity on CPUs [ 4.427354] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 4.440521] NET: Registered protocol family 10 [ 4.490889] Segment Routing with IPv6 [ 4.500738] mip6: Mobile IPv6 [ 4.509687] NET: Registered protocol family 17 [ 4.520332] mpls_gso: MPLS GSO support [ 4.530622] registered taskstats version 1 [ 4.540767] Loading compiled-in X.509 certificates [ 4.702222] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 4.717277] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9' [ 4.730525] zswap: loaded using pool lzo/zbud [ 4.741605] Key type ._fscrypt registered [ 4.751771] Key type .fscrypt registered [ 4.761789] Key type fscrypt-provisioning registered [ 4.773034] AppArmor: AppArmor sha1 policy hashing enabled [ 4.790329] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 24, base_baud = 0) is a PL011 rev2 [ 4.805774] serial serial0: tty port ttyAMA0 registered [ 4.820093] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-01-07T18:27:29 [ 5.009712] Freeing unused kernel memory: 5312K [ 5.136291] Checked W+X mappings: passed, no W+X pages found [ 5.148172] Run /init as init process [ 5.157881] with arguments: [ 5.157887] /init [ 5.157892] with environment: [ 5.157898] HOME=/ [ 5.157903] TERM=linux [ 5.478620] phy_generic: module verification failed: signature and/or required key missing - tainting kernel [ 5.499005] sdhci: Secure Digital Host Controller Interface driver [ 5.511558] sdhci: Copyright(c) Pierre Ossman [ 5.531983] usb_phy_generic phy: supply vcc not found, using dummy regulator [ 5.569926] sdhci-pltfm: SDHCI platform and OF driver helper [ 5.577393] libphy: Fixed MDIO Bus: probed [ 5.591486] usbcore: registered new interface driver usbfs [ 5.603979] usbcore: registered new interface driver hub [ 5.616011] sdhci-iproc fe300000.sdhci: allocated mmc-pwrseq [ 5.616657] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [ 5.629992] usbcore: registered new device driver usb [ 5.665821] mmc0: SDHCI controller on fe300000.sdhci [fe300000.sdhci] using PIO [ 5.677811] mmc1: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA [ 5.692715] dwc2 fe980000.usb: supply vusb_d not found, using dummy regulator [ 5.707607] dwc2 fe980000.usb: supply vusb_a not found, using dummy regulator [ 5.721759] libphy: bcmgenet MII bus: probed [ 5.722288] mmc0: queuing unknown CIS tuple 0x80 (2 bytes) [ 5.739930] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 5.745427] mmc0: queuing unknown CIS tuple 0x80 (3 bytes) [ 5.755229] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 5.768473] mmc0: queuing unknown CIS tuple 0x80 (3 bytes) [ 5.780957] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000000000000890 [ 5.797101] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 5.808405] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 5.820903] mmc0: queuing unknown CIS tuple 0x80 (3 bytes) [ 5.822525] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [ 5.829180] dwc2 fe980000.usb: EPs: 8, dedicated fifos, 4080 entries in SPRAM [ 5.833950] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.845246] mmc1: new ultra high speed DDR50 SDHC card at address 0007 [ 5.846433] mmcblk1: mmc1:0007 SD32G 29.0 GiB [ 5.858180] usb usb1: Product: xHCI Host Controller [ 5.858190] usb usb1: Manufacturer: Linux 5.10.0-2-arm64 xhci-hcd [ 5.869719] random: fast init done [ 5.876012] mmcblk1: p1 [ 5.885287] usb usb1: SerialNumber: 0000:01:00.0 [ 5.911129] mmc0: new high speed SDIO card at address 0001 [ 5.921181] hub 1-0:1.0: USB hub found [ 5.983822] hub 1-0:1.0: 1 port detected [ 5.994845] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 6.006422] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 6.020267] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 6.033239] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.047994] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.061600] usb usb2: Product: xHCI Host Controller [ 6.072794] usb usb2: Manufacturer: Linux 5.10.0-2-arm64 xhci-hcd [ 6.085201] usb usb2: SerialNumber: 0000:01:00.0 [ 6.096895] hub 2-0:1.0: USB hub found [ 6.107182] hub 2-0:1.0: 4 ports detected [ 6.237734] raid6: neonx8 gen() 1751 MB/s [ 6.313725] raid6: neonx8 xor() 1277 MB/s [ 6.389724] raid6: neonx4 gen() 1822 MB/s [ 6.465725] raid6: neonx4 xor() 1347 MB/s [ 6.541731] raid6: neonx2 gen() 1566 MB/s [ 6.617719] raid6: neonx2 xor() 1209 MB/s [ 6.693720] raid6: neonx1 gen() 1181 MB/s [ 6.769721] raid6: neonx1 xor() 942 MB/s [ 6.845729] raid6: int64x8 gen() 1000 MB/s [ 6.921725] raid6: int64x8 xor() 569 MB/s [ 6.997720] raid6: int64x4 gen() 1018 MB/s [ 7.073731] raid6: int64x4 xor() 573 MB/s [ 7.149720] raid6: int64x2 gen() 949 MB/s [ 7.225725] raid6: int64x2 xor() 514 MB/s [ 7.301752] raid6: int64x1 gen() 730 MB/s [ 7.377720] raid6: int64x1 xor() 383 MB/s [ 7.387471] raid6: using algorithm neonx4 gen() 1822 MB/s [ 7.398389] raid6: .... xor() 1347 MB/s, rmw enabled [ 7.408863] raid6: using neon recovery algorithm [ 7.420755] xor: measuring software checksum speed [ 7.434994] 8regs : 2522 MB/sec [ 7.448142] 32regs : 2903 MB/sec [ 7.461607] arm64_neon : 2628 MB/sec [ 7.471319] xor: using function: 32regs (2903 MB/sec) [ 7.549755] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 7.565169] Btrfs loaded, crc32c=crc32c-generic [ 7.716367] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 [ 7.730081] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 7.742635] usb 1-1: Product: USB2.0 Hub [ 7.753602] hub 1-1:1.0: USB hub found [ 7.762895] hub 1-1:1.0: 4 ports detected [ 7.842060] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 7.880223] usb 2-2: New USB device found, idVendor=0411, idProduct=0311, bcdDevice= 1.48 [ 7.893679] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.906064] usb 2-2: Product: SSD-PUT/N [ 7.915033] usb 2-2: Manufacturer: BUFFALO [ 7.924214] usb 2-2: SerialNumber: 0020578510118491 [ 7.951151] SCSI subsystem initialized [ 7.964845] usbcore: registered new interface driver usb-storage [ 7.984356] scsi host0: uas [ 7.992902] usbcore: registered new interface driver uas [ 8.003983] scsi 0:0:0:0: Direct-Access BUFFALO SSD-PUT/N 2210 PQ: 0 ANSI: 6 [ 8.030194] sd 0:0:0:0: [sda] 2000409264 512-byte logical blocks: (1.02 TB/954 GiB) [ 8.043413] sd 0:0:0:0: [sda] Write Protect is off [ 8.053431] sd 0:0:0:0: [sda] Mode Sense: 2f 00 00 00 [ 8.053836] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.069068] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes [ 8.095211] sda: sda1 sda2 sda3 [ 8.108144] sd 0:0:0:0: [sda] Attached SCSI disk [ 8.121804] usb 1-1.3: new low-speed USB device number 3 using xhci_hcd [ 8.244313] usb 1-1.3: New USB device found, idVendor=15ca, idProduct=00c3, bcdDevice= 5.12 [ 8.258128] usb 1-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 8.270801] usb 1-1.3: Product: USB Optical Mouse [ 8.295810] hid: raw HID events driver (C) Jiri Kosina [ 8.314753] usbcore: registered new interface driver usbhid [ 8.325557] usbhid: USB HID core driver [ 8.341814] input: USB Optical Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:15CA:00C3.0001/input/input0 [ 8.362991] hid-generic 0003:15CA:00C3.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:01:00.0-1.3/input0 [ 8.381789] usb 1-1.4: new low-speed USB device number 4 using xhci_hcd [ 8.501737] usb 1-1.4: New USB device found, idVendor=1a2c, idProduct=4324, bcdDevice= 1.10 [ 8.515643] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.528444] usb 1-1.4: Product: USB Keyboard [ 8.538104] usb 1-1.4: Manufacturer: SEM [ 8.556472] input: SEM USB Keyboard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:1A2C:4324.0002/input/input1 [ 8.634292] hid-generic 0003:1A2C:4324.0002: input,hidraw1: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-0000:01:00.0-1.4/input0 [ 8.658659] input: SEM USB Keyboard Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:1A2C:4324.0003/input/input2 [ 8.741967] input: SEM USB Keyboard System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:1A2C:4324.0003/input/input3 [ 8.765015] hid-generic 0003:1A2C:4324.0003: input,hidraw2: USB HID v1.10 Device [SEM USB Keyboard] on usb-0000:01:00.0-1.4/input1 [ 38.024001] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 38.211040] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 38.365179] systemd[1]: System time before build time, advancing clock. [ 38.407634] systemd[1]: Inserted module 'autofs4' [ 38.452669] systemd[1]: systemd 247.2-5 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 38.489363] systemd[1]: Detected architecture arm64. [ 38.518597] systemd[1]: Set hostname to <raspi48gb>. [ 38.536617] systemd[1]: Initializing machine ID from D-Bus machine ID. [ 39.014443] systemd[1]: Queued start job for default target Graphical Interface. [ 39.029963] random: systemd: uninitialized urandom read (16 bytes read) [ 39.047314] systemd[1]: Created slice system-getty.slice. [ 39.077927] random: systemd: uninitialized urandom read (16 bytes read) [ 39.093019] systemd[1]: Created slice system-modprobe.slice. [ 39.121891] random: systemd: uninitialized urandom read (16 bytes read) [ 39.137404] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 39.167383] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 39.199157] systemd[1]: Created slice User and Session Slice. [ 39.230275] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 39.262172] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 39.294771] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 39.330069] systemd[1]: Reached target Local Encrypted Volumes. [ 39.362002] systemd[1]: Reached target Paths. [ 39.389921] systemd[1]: Reached target Remote File Systems. [ 39.417895] systemd[1]: Reached target Slices. [ 39.448336] systemd[1]: Listening on Syslog Socket. [ 39.478489] systemd[1]: Listening on fsck to fsckd communication Socket. [ 39.510184] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 39.542718] systemd[1]: Listening on Journal Audit Socket. [ 39.570388] systemd[1]: Listening on Journal Socket (/dev/log). [ 39.602562] systemd[1]: Listening on Journal Socket. [ 39.630724] systemd[1]: Listening on udev Control Socket. [ 39.658387] systemd[1]: Listening on udev Kernel Socket. [ 39.690413] systemd[1]: Mounting Huge Pages File System... [ 39.722384] systemd[1]: Mounting POSIX Message Queue File System... [ 39.758544] systemd[1]: Mounting Kernel Debug File System... [ 39.790967] systemd[1]: Mounting Kernel Trace File System... [ 39.827151] systemd[1]: Starting Restore / save the current clock... [ 39.863217] systemd[1]: Starting Set the console keyboard layout... [ 39.899517] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 39.938769] systemd[1]: Starting Load Kernel Module configfs... [ 39.974874] systemd[1]: Starting Load Kernel Module drm... [ 40.007687] systemd[1]: Starting Load Kernel Module fuse... [ 40.031187] fuse: init (API version 7.32) [ 40.043680] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 40.060588] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 40.085130] systemd[1]: Starting Journal Service... [ 40.125136] systemd[1]: Starting Load Kernel Modules... [ 40.162940] systemd[1]: Starting Remount Root and Kernel File Systems... [ 40.203414] systemd[1]: Starting Coldplug All udev Devices... [ 40.216898] EXT4-fs (sda2): re-mounted. Opts: discard [ 40.260544] systemd[1]: Mounted Huge Pages File System. [ 40.294666] systemd[1]: Mounted POSIX Message Queue File System. [ 40.326689] systemd[1]: Mounted Kernel Debug File System. [ 40.354770] systemd[1]: Mounted Kernel Trace File System. [ 40.382441] systemd[1]: Started Journal Service. [ 41.312884] vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 41.343876] iproc-rng200 fe104000.rng: hwrng registered [ 41.359462] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 41.425155] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 41.481267] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 41.493422] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 41.507147] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 41.523498] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 41.534865] platform regulatory.0: firmware: direct-loading firmware regulatory.db [ 41.547063] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s [ 41.551911] mc: Linux media interface: v0.10 [ 41.587927] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 41.603003] usbcore: registered new interface driver brcmfmac [ 41.612682] brcmfmac mmc0:0001:1: firmware: direct-loading firmware brcm/brcmfmac43455-sdio.bin [ 41.617280] videodev: Linux video capture interface: v2.00 [ 41.619316] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 41.624966] brcmfmac mmc0:0001:1: firmware: direct-loading firmware brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt [ 41.627668] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 41.674199] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 41.677404] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 41.700303] random: crng init done [ 41.700310] random: 7 urandom warning(s) missed due to ratelimiting [ 41.721816] bcm2835_audio bcm2835_audio: card created with 8 channels [ 41.775112] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 41.787599] brcmfmac mmc0:0001:1: firmware: failed to load brcm/brcmfmac43455-sdio.clm_blob (-2) [ 41.802067] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware [ 41.802115] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available [ 41.842787] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 1 2015 07:29:38 version 7.45.18 (r538002) FWID 01-6a2c8ad4 [ 41.843686] cryptd: max_cpu_qlen set to 1000 [ 42.154659] Bluetooth: Core ver 2.22 [ 42.161122] NET: Registered protocol family 31 [ 42.168491] Bluetooth: HCI device and connection manager initialized [ 42.168526] Bluetooth: HCI socket layer initialized [ 42.187535] Bluetooth: L2CAP socket layer initialized [ 42.197752] Bluetooth: SCO socket layer initialized [ 42.221468] Bluetooth: HCI UART driver ver 2.3 [ 42.229250] Bluetooth: HCI UART protocol H4 registered [ 42.238484] Bluetooth: HCI UART protocol LL registered [ 42.247318] Bluetooth: HCI UART protocol ATH3K registered [ 42.256490] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 42.266175] Bluetooth: HCI UART protocol Intel registered [ 42.274930] Bluetooth: HCI UART protocol Broadcom registered [ 42.283874] Bluetooth: HCI UART protocol QCA registered [ 42.292704] Bluetooth: HCI UART protocol AG6XX registered [ 42.301768] Bluetooth: HCI UART protocol Marvell registered [ 42.310164] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator [ 42.320516] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator [ 42.449901] uart-pl011 fe201000.serial: no DMA platform data [ 42.698336] Bluetooth: hci0: BCM: chip id 107 [ 42.705557] Bluetooth: hci0: BCM: features 0x2f [ 42.714147] Bluetooth: hci0: BCM4345C0 [ 42.720457] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000 [ 42.729027] bluetooth hci0: firmware: failed to load brcm/BCM4345C0.hcd (-2) [ 42.738767] bluetooth hci0: firmware: failed to load brcm/BCM.hcd (-2) [ 42.747913] Bluetooth: hci0: BCM: firmware Patch file not found, tried: [ 42.757164] Bluetooth: hci0: BCM: 'brcm/BCM4345C0.hcd' [ 42.764884] Bluetooth: hci0: BCM: 'brcm/BCM.hcd' [ 130.290505] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) [ 130.302276] bcmgenet fd580000.ethernet eth0: Link is Down [ 139.269674] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Added tag(s) patch.
Request was from Ryutaroh Matsumoto <ryutaroh@ict.e.titech.ac.jp>
to 977694-submit@bugs.debian.org.
(Sun, 24 Jan 2021 06:06:03 GMT) (full text, mbox, link).
Added indication that bug 977694 blocks 980980
Request was from Ryutaroh Matsumoto <ryutaroh@ict.e.titech.ac.jp>
to submit@bugs.debian.org.
(Mon, 25 Jan 2021 00:27:04 GMT) (full text, mbox, link).
Added tag(s) bullseye.
Request was from Ryutaroh Matsumoto <ryutaroh@ict.e.titech.ac.jp>
to control@bugs.debian.org.
(Mon, 25 Jan 2021 00:33:03 GMT) (full text, mbox, link).
Information forwarded
to debian-bugs-dist@lists.debian.org, Debian Kernel Team <debian-kernel@lists.debian.org>:
Bug#977694; Package src:linux.
(Thu, 28 Jan 2021 04:33:02 GMT) (full text, mbox, link).
Acknowledgement sent
to Ryutaroh Matsumoto <ryutaroh@ict.e.titech.ac.jp>:
Extra info received and forwarded to list. Copy sent to Debian Kernel Team <debian-kernel@lists.debian.org>.
(Thu, 28 Jan 2021 04:33:02 GMT) (full text, mbox, link).
Message #67 received at 977694@bugs.debian.org (full text, mbox, reply):
Control: reassign -1 raspi-firmware 1.20210111+ds-2 Booting linux kernel 5.10.x from USB MSD needs either * loading reset-raspberrypi.ko in initramfs, * or rebuild kernel with CONFIG_RESET_RASPBERRYPI=y in .config Anyway, the combination of linux-image-arm64/sid and raspi-firmware/sid does not allow booting RPi4 from USB-MSD. Boot from USB-MSD was possible in Debian kernel 5.9 series. I think this boot failure should be fixed by echo reset-raspberrypi >/usr/share/initramfs-tools/modules.d/raspi-firmware.conf instead of CONFIG_RESET_RASPBERRYPI=y. If this is considered an issue in src:linux, please reassign this back. Best regards, Ryutaroh Matsumoto
Bug reassigned from package 'src:linux' to 'raspi-firmware'.
Request was from Ryutaroh Matsumoto <ryutaroh@ict.e.titech.ac.jp>
to 977694-submit@bugs.debian.org.
(Thu, 28 Jan 2021 04:33:02 GMT) (full text, mbox, link).
No longer marked as found in versions linux/5.10.9-1.
Request was from Ryutaroh Matsumoto <ryutaroh@ict.e.titech.ac.jp>
to 977694-submit@bugs.debian.org.
(Thu, 28 Jan 2021 04:33:03 GMT) (full text, mbox, link).
Marked as found in versions raspi-firmware/1.20210111+ds-2.
Request was from Ryutaroh Matsumoto <ryutaroh@ict.e.titech.ac.jp>
to 977694-submit@bugs.debian.org.
(Thu, 28 Jan 2021 04:33:03 GMT) (full text, mbox, link).
Removed indication that bug 977694 blocks 980980
Request was from Ryutaroh Matsumoto <ryutaroh@ict.e.titech.ac.jp>
to control@bugs.debian.org.
(Thu, 28 Jan 2021 07:39:06 GMT) (full text, mbox, link).
Information forwarded
to debian-bugs-dist@lists.debian.org, pkg-raspi <pkg-raspi-maintainers@lists.alioth.debian.org>:
Bug#977694; Package raspi-firmware.
(Sat, 06 Mar 2021 20:54:03 GMT) (full text, mbox, link).
Acknowledgement sent
to João Ricardo Sares Teles de Matos <joao.r.matos@tecnico.ulisboa.pt>:
Extra info received and forwarded to list. Copy sent to pkg-raspi <pkg-raspi-maintainers@lists.alioth.debian.org>.
(Sat, 06 Mar 2021 20:54:03 GMT) (full text, mbox, link).
Message #80 received at 977694@bugs.debian.org (full text, mbox, reply):
I ran into this issue while trying to migrate the root filesystem into a btrfs subvolume on an USB hard drive. I'm also using a Raspberry Pi 4B. I followed Ryutaroh's advice of loading the reset_raspberrypi module, as follows: > echo reset_raspberrypi >/etc/initramfs-tools/modules > update-initramfs -uk all And now I can boot from USB. Note that this issue also causes any other USB devices to be missing while in initramfs, including USB keyboards, which might be useful in a rescue shell. Sidenote: the rescue shell only seems to be spawned on the serial terminal currently, so having a USB keyboard is still useless in that regard, but that's another issue. I feel inclined to agree with the idea of adding the file > /usr/share/initramfs-tools/modules.d/raspi-firmware.conf with the contents > reset_raspberrypi to the package raspi-firmware, provided that it doesn't interfere with the rest of the Raspberry Pi family. Best regards, João Matos
Information forwarded
to debian-bugs-dist@lists.debian.org, pkg-raspi <pkg-raspi-maintainers@lists.alioth.debian.org>:
Bug#977694; Package raspi-firmware.
(Mon, 15 Mar 2021 00:39:02 GMT) (full text, mbox, link).
Acknowledgement sent
to Ryutaroh Matsumoto <ryutaroh@ict.e.titech.ac.jp>:
Extra info received and forwarded to list. Copy sent to pkg-raspi <pkg-raspi-maintainers@lists.alioth.debian.org>.
(Mon, 15 Mar 2021 00:39:02 GMT) (full text, mbox, link).
Message #85 received at 977694@bugs.debian.org (full text, mbox, reply):
Control: reassign -1 initramfs-tools 0.139 Control: tags -1 + pending #977694 is going to be fixed by the commit https://salsa.debian.org/kernel-team/initramfs-tools/-/commit/a930e9a448d807cd23632c095a45d48842ff2f24 Ryutaroh
Bug reassigned from package 'raspi-firmware' to 'initramfs-tools'.
Request was from Ryutaroh Matsumoto <ryutaroh@ict.e.titech.ac.jp>
to 977694-submit@bugs.debian.org.
(Mon, 15 Mar 2021 00:39:02 GMT) (full text, mbox, link).
No longer marked as found in versions raspi-firmware/1.20210111+ds-2.
Request was from Ryutaroh Matsumoto <ryutaroh@ict.e.titech.ac.jp>
to 977694-submit@bugs.debian.org.
(Mon, 15 Mar 2021 00:39:03 GMT) (full text, mbox, link).
Marked as found in versions initramfs-tools/0.139.
Request was from Ryutaroh Matsumoto <ryutaroh@ict.e.titech.ac.jp>
to 977694-submit@bugs.debian.org.
(Mon, 15 Mar 2021 00:39:03 GMT) (full text, mbox, link).
Added tag(s) pending.
Request was from Ryutaroh Matsumoto <ryutaroh@ict.e.titech.ac.jp>
to 977694-submit@bugs.debian.org.
(Mon, 15 Mar 2021 00:39:04 GMT) (full text, mbox, link).
Marked as fixed in versions initramfs-tools/0.140.
Request was from Salvatore Bonaccorso <carnil@debian.org>
to control@bugs.debian.org.
(Mon, 15 Mar 2021 04:24:03 GMT) (full text, mbox, link).
Marked Bug as done
Request was from Salvatore Bonaccorso <carnil@debian.org>
to control@bugs.debian.org.
(Mon, 15 Mar 2021 04:24:03 GMT) (full text, mbox, link).
Notification sent
to Ryutaroh Matsumoto <ryutaroh@ict.e.titech.ac.jp>:
Bug acknowledged by developer.
(Mon, 15 Mar 2021 04:24:04 GMT) (full text, mbox, link).
Message sent on
to Ryutaroh Matsumoto <ryutaroh@ict.e.titech.ac.jp>:
Bug#977694.
(Mon, 15 Mar 2021 04:24:06 GMT) (full text, mbox, link).
Message #102 received at 977694-submitter@bugs.debian.org (full text, mbox, reply):
close 977694 0.140 thanks
Bug archived.
Request was from Debbugs Internal Request <owner@bugs.debian.org>
to internal_control@bugs.debian.org.
(Sun, 09 May 2021 07:26:33 GMT) (full text, mbox, link).
Send a report that this bug log contains spam.
Debbugs is free software and licensed under the terms of the GNU Public License version 2. The current version can be obtained from https://bugs.debian.org/debbugs-source/.
Copyright © 1999 Darren O. Benham, 1997,2003 nCipher Corporation Ltd, 1994-97 Ian Jackson, 2005-2017 Don Armstrong, and many other contributors.