Debian Bug report logs - #943238
sshuttle: Python2 removal in sid/bullseye

Toggle useless messages

Message #5 received at maintonly@bugs.debian.org (full text, mbox, reply):

From: morph@debian.org

To: maintonly@bugs.debian.org

Subject: sshuttle: Python2 removal in sid/bullseye

Date: Wed, 23 Oct 2019 02:33:33 +0000

Source: sshuttle
Version: 0.78.5-1
Severity: normal
Tags: sid bullseye
User: debian-python@lists.debian.org
Usertags: py2removal

Python2 becomes end-of-live upstream, and Debian aims to remove
Python2 from the distribution, as discussed in
https://lists.debian.org/debian-python/2019/07/msg00080.html

Your package either build-depends, depends on Python2, or uses Python2
in the autopkg tests (the specific reason can be found searching this
source package in
https://people.debian.org/~morph/mass-bug-py2removal_take2.txt ).
Please stop using Python2, and fix this issue by one of the following
actions.

- Convert your Package to Python3. This is the preferred option.  In
  case you are providing a Python module foo, please consider dropping
  the python-foo package, and only build a python3-foo package.  Please
  don't drop Python2 modules, which still have reverse dependencies,
  just document them.
  
  This is the preferred option.

- If the package is dead upstream, cannot be converted or maintained
  in Debian, it should be removed from the distribution.  If the
  package still has reverse dependencies, raise the severity to
  "serious" and document the reverse dependencies with the BTS affects
  command.  If the package has no reverse dependencies, confirm that
  the package can be removed, reassign this issue to ftp.debian.org,
  make sure that the bug priority is set to normal and retitle the
  issue to "RM: PKG -- removal triggered by the Python2 removal".

- If the package has still many users (popcon >= 300), or is needed to
  build another package which cannot be removed, document that by
  adding the "py2keep" user tag (not replacing the py2remove tag),
  using the debian-python@lists.debian.org user.  Also any
  dependencies on an unversioned python package (python, python-dev)
  must not be used, same with the python shebang.  These have to be
  replaced by python2/python2.7 dependencies and shebang.

  This is the least preferred option.

If there are questions, please refer to the wiki page for the removal:
https://wiki.debian.org/Python/2Removal, or ask for help on IRC
#debian-python, or the debian-python@lists.debian.org mailing list.

Message #16 received at 943238@bugs.debian.org (full text, mbox, reply):

From: Brian May <bam@debian.org>

To: morph@debian.org, 943238@bugs.debian.org

Subject: Re: Bug#943238: sshuttle: Python2 removal in sid/bullseye

Date: Wed, 19 Feb 2020 17:14:46 +1100

For reference, upgrading this to Python 3 should be simple. sshuttle
works fine with Python <= 3.7.

BUT: sshuttle is currently incompatible with Python 3.8.

See https://github.com/sshuttle/sshuttle/issues/381

Help fixing this appreciated. I don't have a lot of time right now, and
this looks like it could be non-trivial to fix.
-- 
Brian May <bam@debian.org>

Message #23 received at 943238@bugs.debian.org (full text, mbox, reply):

From: Adrian Bunk <bunk@debian.org>

To: Brian May <bam@debian.org>, 943238@bugs.debian.org

Subject: Re: Bug#943238: sshuttle: Python2 removal in sid/bullseye

Date: Wed, 18 Mar 2020 11:31:27 +0200

Control: notforwarded -1

On Wed, Feb 19, 2020 at 05:14:46PM +1100, Brian May wrote:
> For reference, upgrading this to Python 3 should be simple. sshuttle
> works fine with Python <= 3.7.
>...

sshuttle already uses Python 3 in stable.

For the Python 2 removal the only problem are the (stale?) build 
dependencies on
  python-pytest-runner, python-pytest-cov

Python 3.8 is a separate issue that can be tracked in #953621.

cu
Adrian

Message #28 received at 943238-submitter@bugs.debian.org (full text, mbox, reply):

From: Brian May <noreply@salsa.debian.org>

To: 943238-submitter@bugs.debian.org

Subject: Bug#943238 marked as pending in sshuttle

Date: Thu, 18 Jun 2020 05:15:46 +0000

Control: tag -1 pending

Hello,

Bug #943238 in sshuttle reported by you has been fixed in the
Git repository and is awaiting an upload. You can see the commit
message below and you can check the diff of the fix at:

https://salsa.debian.org/debian/sshuttle/-/commit/367c14f9a89a3e77e77264925d9e7c0acf48da68

------------------------------------------------------------------------
Remove unused Python 2 dependencies (Closes: #943238)
------------------------------------------------------------------------

(this message was generated automatically)
-- 
Greetings

https://bugs.debian.org/943238

Message #37 received at 943238-close@bugs.debian.org (full text, mbox, reply):

From: Debian FTP Masters <ftpmaster@ftp-master.debian.org>

To: 943238-close@bugs.debian.org

Subject: Bug#943238: fixed in sshuttle 1.0.3-1

Date: Sun, 12 Jul 2020 10:12:37 +0000

Source: sshuttle
Source-Version: 1.0.3-1
Done: Brian May <bam@debian.org>

We believe that the bug you reported is fixed in the latest version of
sshuttle, which is due to be installed in the Debian FTP archive.

A summary of the changes between this version and the previous one is
attached.

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to 943238@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
pp.
Brian May <bam@debian.org> (supplier of updated sshuttle package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@ftp-master.debian.org)


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

Format: 1.8
Date: Sun, 12 Jul 2020 19:21:26 +1000
Source: sshuttle
Architecture: source
Version: 1.0.3-1
Distribution: unstable
Urgency: medium
Maintainer: Brian May <bam@debian.org>
Changed-By: Brian May <bam@debian.org>
Closes: 943238 953621
Changes:
 sshuttle (1.0.3-1) unstable; urgency=medium
 .
   [ Brian May ]
   * Update to latest upstream version. Closes: #953621.
   * Upstream has dropped Python 2 support.
 .
   [ Scott Talbert ]
   * Remove unused Python 2 dependencies. Closes: #943238.
   * Remove ancient X-Python3-Version field
   * Add missing ${sphinxdoc:Depends}
   * Update debhelper-compat version to 13
   * Update Standards-Version to 4.5.0 (no changes needed)
Checksums-Sha1:
 2e72230c05d4394284cf7856b48cdf2be240f215 1991 sshuttle_1.0.3-1.dsc
 491aa8bf6085bec219a12da858bbdb23032473ef 79216 sshuttle_1.0.3.orig.tar.gz
 06aacc9e552c9e17eca8f9604ec52eae31f5ca4d 15372 sshuttle_1.0.3-1.debian.tar.xz
 8cc61aaf99bf69c56abcd78892933ac5ca74d48f 7171 sshuttle_1.0.3-1_source.buildinfo
Checksums-Sha256:
 321bc985f546730469d6b372a5690b7e5beeb31788c7d4420a0369606b60cc23 1991 sshuttle_1.0.3-1.dsc
 0fff1c88669a20bb6a4e7331960673a3a02a2e04ff163e4c9299496646edcf61 79216 sshuttle_1.0.3.orig.tar.gz
 06bbd30181c7f33278e22173c20f78bbef80d5f632912be795f031fcc2715035 15372 sshuttle_1.0.3-1.debian.tar.xz
 a1fffe4183496d05bea5b5031aff1ece9c6ef5309e5fc966f578f4f3b8202f2d 7171 sshuttle_1.0.3-1_source.buildinfo
Files:
 67271b30fbefe8972d0b1a554b3c8c4d 1991 net optional sshuttle_1.0.3-1.dsc
 14dde813e34608c25c6e4176a6f37e9f 79216 net optional sshuttle_1.0.3.orig.tar.gz
 9340fe38b606bc3daaf74c749daa864b 15372 net optional sshuttle_1.0.3-1.debian.tar.xz
 7aff7167351ea378aacf377c14ef40f6 7171 net optional sshuttle_1.0.3-1_source.buildinfo

-----BEGIN PGP SIGNATURE-----

iQIzBAEBCAAdFiEEKpwfR8DOwu5vyB4TKpJZkldkSvoFAl8K3H4ACgkQKpJZkldk
Svo8zA/+Ik4VFvMVO5Pz4vV2u+e37m/Cidxz7B6Qw28vadA9IQHkl6CiWRs1RTjC
h5c1YZ3t2a8O2lz9AzBiIYjk5ah1CxFpeJSt+FKz09U0Q5hqzj7OUbvH55aB8kDI
yjGPInU/f/kD+ne5sHeQ88Cdv9bWHSsh931+1Ozv/0k5Gn0vsJMfqg3vVXc3bXv+
Ed355thwN8etmf87ItePLXv4hRjwzkk9Gmhgbt0KjVOjczqDDieY1zwzgSECarCf
6c1tqjcRU7slPQd6vd+AVGfIZHZeOAGF/tgQ1HzV/RQ6X8OueWID9QcfFa8o9ZY6
YKo31Pyl3JLOE9pXCICaxHFx215jLsAUh6m4LBlUpOps2XY4BsHrUxwLCrAIZZFe
wN8H5ZurWD9OLx9Hcs4NrHztcVw/GlpXqu7SRlOK4CxVUCl91Ddwgcakbql5I2aN
dpUorTsVYpdW4QkgYDWAkktU80QWEMrLvzcgfsdT8QfiAgM93GYxlmFJuTdH97gn
Z8QCpIEtX3dXzOJ5HYJh3FIXEbn4QksIG85M6POVAfZ4K9GD4zpIDHdeMEVw6vrN
2J2SxvLUa5TelD/rVljH8vEEu5NQHJcQVvm0OjcoRUtrNKUH1ewjBXSd6nHFZSnA
JMPDlGrGJe+wA0nSDvOyeZ6t7Z+hMDV7T9Gvtld1tHC5vzLAEYQ=
=7LmH
-----END PGP SIGNATURE-----

Send a report that this bug log contains spam.