Package: xserver-xorg-video-amdgpu; Maintainer for xserver-xorg-video-amdgpu is Debian X Strike Force <debian-x@lists.debian.org>; Source for xserver-xorg-video-amdgpu is src:xserver-xorg-video-amdgpu (PTS, buildd, popcon).
Reported by: "Alan W. Irwin" <Alan.W.Irwin1234@gmail.com>
Date: Fri, 25 May 2018 22:06:02 UTC
Severity: important
Found in version xserver-xorg-video-amdgpu/18.0.1-1
Done: "Simon Iremonger (debian)" <debian@iremonger.me.uk>
Bug is archived. No further changes may be made.
View this report as an mbox folder, status mbox, maintainer mbox
Report forwarded
to debian-bugs-dist@lists.debian.org, Debian X Strike Force <debian-x@lists.debian.org>:
Bug#900087; Package xserver-xorg-video-amdgpu.
(Fri, 25 May 2018 22:06:04 GMT) (full text, mbox, link).
Acknowledgement sent
to "Alan W. Irwin" <Alan.W.Irwin1234@gmail.com>:
New Bug report received and forwarded. Copy sent to Debian X Strike Force <debian-x@lists.debian.org>.
(Fri, 25 May 2018 22:06:04 GMT) (full text, mbox, link).
Message #5 received at submit@bugs.debian.org (full text, mbox, reply):
Package: xserver-xorg-video-amdgpu
Version: 18.0.1-1
Severity: important
Dear Maintainer,
The lock ups for the AMD RX 550 graphics card I have been experiencing
occur on time scales of a few hours after a boot to up to a maximum of
two days after a reboot. The frequency of those backups is the reason
I rated the severity of this issue as "important", but, of course,
feel free to classify the severity any other way you like.
Those lock ups have now become so frequent (3 of them yesterday) that
I am now testing my new computer by using it normally but remotely
using the display of another computer. In this mode the only use of
the RX 550 is to display the login prompt to a Linux console. And
that non-X use is so light, I am hoping the system stays up a long
time without lock ups to confirm what I have found so far that the
actual lock ups only occur when X is running directly on this
computer.
These lock ups when X is running on this computer all freeze the
X display but come in several different varieties:
* I can login from another computer via ssh and execute "shutdown -r now".
However, the display remains black on the subsequent POST phase unless
I hit the reset button.
* I cannot login from another computer with ssh, but networking is up
with this computer (i.e., ping works), and I had to hit the reset button.
* Not even ping works, and I had to hit the reset button.
On one occasion (I have forgotten which of the 3 varieties of lock ups
this was) when I hit the reset button the card still gave a black
screen during the POST phase so I was concerned it had been turned
into a brick. However, as a last-ditch effort to get this display
working again, I tried depressing the power button for 3 seconds so
the computer powered off. Then several minutes later I powered on,
and the card properly displayed the POST phase again after that.
Between lock-up events, the card does display with extremely high
quality, e.g., The Weather Network videos of the recent Hawaii
eruption. Also, the non-graphical component of this new box seems to
be reliable. For example, I recently copied 0.5TB of files from my
old computer to this new computer using rsync, and then checked every
one of those 4 trillion bits that had been transferred by a subsequent
invocation of rsync --checksum. I am pretty sure this rsync
--checksum test means the Ryzen 7 1700 CPU's, its 64GB of memory, the
(external) source drive, and the (internal) destination drive are all
reliable.
I also ran "dpkg --verify" and "dpkg --audit" on xserver-xorg-video-amdgpu
and firmware-amd-graphics (this firmware package is required for
the RX 550) to verify those packages had not somehow become corrupted.
I also noticed the following polaris-related (the RX 550 uses the POLARIS12
chipset) messages that are retrieved by dmesg
WATCHOUT! root@merlin> dmesg |grep -B3 -A3 -i polaris
[ 31.637861] ata10: DUMMY
[ 31.637863] ata11: SATA max UDMA/133 abar m4096@0xfe708000 port 0xfe708200 irq 69
[ 31.637865] ata12: SATA max UDMA/133 abar m4096@0xfe708000 port 0xfe708280 irq 70
[ 31.639015] [drm] initializing kernel modesetting (POLARIS12 0x1002:0x699F 0x1043:0x0513 0xC7).
[ 31.639026] [drm] register mmio base: 0xFE800000
[ 31.639026] [drm] register mmio size: 262144
[ 31.639036] [drm] probing gen 2 caps for device 1022:1453 = 737903/e
--
[ 31.639302] amdgpu 0000:0a:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xffff
[ 31.639322] ATOM BIOS: 115-C994PI0-102
[ 31.639616] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[ 31.639825] amdgpu 0000:0a:00.0: firmware: direct-loading firmware amdgpu/polaris12_mc.bin
[ 31.639834] amdgpu 0000:0a:00.0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
[ 31.639836] amdgpu 0000:0a:00.0: GTT: 256M 0x0000000000000000 - 0x000000000FFFFFFF
[ 31.639840] [drm] Detected VRAM RAM=4096M, BAR=256M
--
[ 31.640488] [drm] DDC: 0x4878 0x4878 0x4879 0x4879 0x487a 0x487a 0x487b 0x487b
[ 31.640488] [drm] Encoders:
[ 31.640489] [drm] DFP3: INTERNAL_UNIPHY
[ 31.640511] amdgpu 0000:0a:00.0: firmware: failed to load amdgpu/polaris12_pfp_2.bin (-2)
[ 31.640518] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[ 31.640523] amdgpu 0000:0a:00.0: Direct firmware load for amdgpu/polaris12_pfp_2.bin failed with error -2
[ 31.640660] amdgpu 0000:0a:00.0: firmware: direct-loading firmware amdgpu/polaris12_pfp.bin
[ 31.640674] amdgpu 0000:0a:00.0: firmware: failed to load amdgpu/polaris12_me_2.bin (-2)
[ 31.640679] amdgpu 0000:0a:00.0: Direct firmware load for amdgpu/polaris12_me_2.bin failed with error -2
[ 31.640793] amdgpu 0000:0a:00.0: firmware: direct-loading firmware amdgpu/polaris12_me.bin
[ 31.640808] amdgpu 0000:0a:00.0: firmware: failed to load amdgpu/polaris12_ce_2.bin (-2)
[ 31.640813] amdgpu 0000:0a:00.0: Direct firmware load for amdgpu/polaris12_ce_2.bin failed with error -2
[ 31.640918] amdgpu 0000:0a:00.0: firmware: direct-loading firmware amdgpu/polaris12_ce.bin
[ 31.641031] amdgpu 0000:0a:00.0: firmware: direct-loading firmware amdgpu/polaris12_rlc.bin
[ 31.641046] amdgpu 0000:0a:00.0: firmware: failed to load amdgpu/polaris12_mec_2.bin (-2)
[ 31.641051] amdgpu 0000:0a:00.0: Direct firmware load for amdgpu/polaris12_mec_2.bin failed with error -2
[ 31.641415] amdgpu 0000:0a:00.0: firmware: direct-loading firmware amdgpu/polaris12_mec.bin
[ 31.641428] amdgpu 0000:0a:00.0: firmware: failed to load amdgpu/polaris12_mec2_2.bin (-2)
[ 31.641432] amdgpu 0000:0a:00.0: Direct firmware load for amdgpu/polaris12_mec2_2.bin failed with error -2
[ 31.641804] amdgpu 0000:0a:00.0: firmware: direct-loading firmware amdgpu/polaris12_mec2.bin
[ 31.642905] amdgpu 0000:0a:00.0: firmware: direct-loading firmware amdgpu/polaris12_sdma.bin
[ 31.643031] amdgpu 0000:0a:00.0: firmware: direct-loading firmware amdgpu/polaris12_sdma1.bin
[ 31.643541] amdgpu 0000:0a:00.0: firmware: direct-loading firmware amdgpu/polaris12_uvd.bin
[ 31.643545] [drm] Found UVD firmware Version: 1.79 Family ID: 16
[ 31.643559] [drm] UVD ENC is disabled
[ 31.644175] amdgpu 0000:0a:00.0: firmware: direct-loading firmware amdgpu/polaris12_vce.bin
[ 31.644178] [drm] Found VCE firmware Version: 52.4 Binary ID: 3
[ 31.644691] amdgpu 0000:0a:00.0: firmware: direct-loading firmware amdgpu/polaris12_smc.bin
[ 31.646382] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input10
[ 31.646659] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input11
[ 31.646913] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input12
Are any of those failures to load firmware a concern or are those
just generic failure messages that should be ignored?
Please let me know any other tests you would like me to run to help figure
out the source of these lock ups.
Alan
-- Package-specific info:
/etc/X11/X does not exist.
/etc/X11/X is not a symlink.
/etc/X11/X is not executable.
VGA-compatible devices on PCI bus:
----------------------------------
0a:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Lexa PRO [Radeon RX 550] [1002:699f] (rev c7)
Xorg X server configuration file status:
----------------------------------------
-rw-r--r-- 1 root root 1910 May 17 10:30 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
-------------------------------
# Use defaults for most things, but configure the exceptions to
# defaults that I like.
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
# Use automatic evdev detection of mouse and keyboard
# so no InputDevice commands here.
EndSection
# As recommended by http://pkg-xorg.alioth.debian.org/howto/configure-input.html
# Note there is no keyboard equivalent because that is configured using
# /etc/default/keyboard and following the udevadmin command given in man keyboard
# (or reboot the system) to make those options visible to X.
Section "InputClass"
Identifier "evdev-pointer"
MatchIsPointer "on"
Driver "evdev"
# Disable mouse wheel if it exists (found in evdev man page)
Option "ButtonMapping" "1 2 3 0 0"
EndSection
Section "Monitor"
Identifier "Monitor0"
DisplaySize 410 260 # mm
VendorName "ACI"
ModelName "ASUS VH198"
### Comment all HorizSync and VertRefresh values to use DDC:
#HorizSync 30.0 - 80.0
HorizSync 30.0 - 67.6
VertRefresh 55.0 - 75.0
Option "DPMS"
EndSection
#Section "Module"
# Load "modesetting"
#EndSection
# This section inferred from the Jessie "Card0" identifier and general
# "Device" section syntax, the appropriate "amdgpu" name of the
# driver for the Radeon RX 550 graphics card with Polaris 12 chipset,
# AND the following lspci result on Buster merlin:
# 0a:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Lexa PRO [Radeon RX 550] (rev c7)
# where the 0a:00 must be converted from hexadecimal to decimal to help determine the BusID value
Section "Device"
Identifier "Card0"
Driver "amdgpu"
#BusID "PCI:10:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
/etc/X11/xorg.conf.d does not exist.
/etc/modprobe.d contains no KMS configuration files.
Kernel version (/proc/version):
-------------------------------
Linux version 4.16.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 7.3.0 (Debian 7.3.0-17)) #1 SMP Debian 4.16.5-1 (2018-04-29)
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 irwin irwin 44087 May 17 12:39 /home/irwin/.local/share/xorg/Xorg.7.log
-rw-r--r-- 1 irwin irwin 4546 May 17 12:47 /home/irwin/.local/share/xorg/Xorg.0.log
-rw-r--r-- 1 root root 50680 May 17 13:40 /var/log/Xorg.7.log
-rw-r--r-- 1 root root 39436 May 22 11:49 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 44136 May 25 01:40 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 62.661]
X.Org X Server 1.19.6
Release Date: 2017-12-20
[ 62.661] X Protocol Version 11, Revision 0
[ 62.661] Build Operating System: Linux 4.9.0-5-amd64 x86_64 Debian
[ 62.661] Current Operating System: Linux merlin 4.16.0-1-amd64 #1 SMP Debian 4.16.5-1 (2018-04-29) x86_64
[ 62.661] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.16.0-1-amd64 root=UUID=1e45a1ee-a5d6-4327-9a7b-2663ffc0b157 ro rootwait quiet
[ 62.661] Build Date: 26 January 2018 04:30:21PM
[ 62.662] xorg-server 2:1.19.6-1 (https://www.debian.org/support)
[ 62.662] Current version of pixman: 0.34.0
[ 62.662] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 62.662] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 62.662] (==) Log file: "/var/log/Xorg.0.log", Time: Fri May 25 01:37:14 2018
[ 62.664] (==) Using config file: "/etc/X11/xorg.conf"
[ 62.664] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 62.664] (==) ServerLayout "X.org Configured"
[ 62.664] (**) |-->Screen "Screen0" (0)
[ 62.664] (**) | |-->Monitor "Monitor0"
[ 62.665] (**) | |-->Device "Card0"
[ 62.665] (==) Automatically adding devices
[ 62.665] (==) Automatically enabling devices
[ 62.665] (==) Automatically adding GPU devices
[ 62.665] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 62.667] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 62.667] Entry deleted from font path.
[ 62.667] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 62.667] Entry deleted from font path.
[ 62.667] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[ 62.667] Entry deleted from font path.
[ 62.667] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 62.667] Entry deleted from font path.
[ 62.667] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/100dpi,
built-ins
[ 62.667] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 62.667] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 62.668] (II) Loader magic: 0x5599640bcde0
[ 62.668] (II) Module ABI versions:
[ 62.668] X.Org ANSI C Emulation: 0.4
[ 62.668] X.Org Video Driver: 23.0
[ 62.668] X.Org XInput driver : 24.1
[ 62.668] X.Org Server Extension : 10.0
[ 62.668] (++) using VT number 1
[ 62.670] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[ 62.671] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 62.672] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[ 62.675] (--) PCI:*(0:10:0:0) 1002:699f:1043:0513 rev 199, Mem @ 0xe0000000/268435456, 0xf0000000/2097152, 0xfe800000/262144, I/O @ 0x0000f000/256, BIOS @ 0x????????/131072
[ 62.675] (II) LoadModule: "glx"
[ 62.675] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 62.678] (II) Module glx: vendor="X.Org Foundation"
[ 62.678] compiled for 1.19.6, module version = 1.0.0
[ 62.678] ABI class: X.Org Server Extension, version 10.0
[ 62.678] (II) LoadModule: "amdgpu"
[ 62.678] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[ 62.680] (II) Module amdgpu: vendor="X.Org Foundation"
[ 62.680] compiled for 1.19.6, module version = 18.0.1
[ 62.680] Module class: X.Org Video Driver
[ 62.680] ABI class: X.Org Video Driver, version 23.0
[ 62.680] (II) AMDGPU: Driver for AMD Radeon:
All GPUs supported by the amdgpu kernel driver
[ 62.680] (II) [KMS] Kernel modesetting enabled.
[ 62.680] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[ 62.680] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 62.680] (==) AMDGPU(0): Default visual is TrueColor
[ 62.680] (==) AMDGPU(0): RGB weight 888
[ 62.680] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[ 62.680] (--) AMDGPU(0): Chipset: "Radeon RX 550 Series" (ChipID = 0x699f)
[ 62.680] (II) Loading sub module "fb"
[ 62.680] (II) LoadModule: "fb"
[ 62.680] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 62.681] (II) Module fb: vendor="X.Org Foundation"
[ 62.681] compiled for 1.19.6, module version = 1.0.0
[ 62.681] ABI class: X.Org ANSI C Emulation, version 0.4
[ 62.681] (II) Loading sub module "dri2"
[ 62.681] (II) LoadModule: "dri2"
[ 62.681] (II) Module "dri2" already built-in
[ 62.785] (II) Loading sub module "glamoregl"
[ 62.785] (II) LoadModule: "glamoregl"
[ 62.785] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 62.792] (II) Module glamoregl: vendor="X.Org Foundation"
[ 62.792] compiled for 1.19.6, module version = 1.0.0
[ 62.792] ABI class: X.Org ANSI C Emulation, version 0.4
[ 62.792] (II) glamor: OpenGL accelerated X.org driver based.
[ 62.797] (II) glamor: EGL version 1.5 (DRI2):
[ 62.803] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[ 62.803] (==) AMDGPU(0): TearFree property default: auto
[ 62.803] (II) AMDGPU(0): KMS Pageflipping: enabled
[ 62.832] (II) AMDGPU(0): Output DisplayPort-0 using monitor section Monitor0
[ 62.833] (II) AMDGPU(0): Output HDMI-A-0 has no monitor section
[ 62.872] (II) AMDGPU(0): Output DVI-D-0 has no monitor section
[ 62.904] (II) AMDGPU(0): EDID for output DisplayPort-0
[ 62.905] (II) AMDGPU(0): EDID for output HDMI-A-0
[ 62.944] (II) AMDGPU(0): EDID for output DVI-D-0
[ 62.944] (II) AMDGPU(0): Manufacturer: ACI Model: 19e7 Serial#: 16843009
[ 62.944] (II) AMDGPU(0): Year: 2010 Week: 28
[ 62.944] (II) AMDGPU(0): EDID Version: 1.3
[ 62.944] (II) AMDGPU(0): Digital Display Input
[ 62.944] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 41 vert.: 26
[ 62.944] (II) AMDGPU(0): Gamma: 2.20
[ 62.944] (II) AMDGPU(0): DPMS capabilities: Off
[ 62.944] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 62.944] (II) AMDGPU(0): Default color space is primary color space
[ 62.944] (II) AMDGPU(0): First detailed timing is preferred mode
[ 62.944] (II) AMDGPU(0): redX: 0.640 redY: 0.334 greenX: 0.286 greenY: 0.599
[ 62.944] (II) AMDGPU(0): blueX: 0.154 blueY: 0.077 whiteX: 0.313 whiteY: 0.329
[ 62.944] (II) AMDGPU(0): Supported established timings:
[ 62.944] (II) AMDGPU(0): 720x400@70Hz
[ 62.944] (II) AMDGPU(0): 640x480@60Hz
[ 62.944] (II) AMDGPU(0): 640x480@72Hz
[ 62.944] (II) AMDGPU(0): 640x480@75Hz
[ 62.944] (II) AMDGPU(0): 800x600@56Hz
[ 62.944] (II) AMDGPU(0): 800x600@60Hz
[ 62.944] (II) AMDGPU(0): 800x600@75Hz
[ 62.944] (II) AMDGPU(0): 1024x768@60Hz
[ 62.944] (II) AMDGPU(0): 1024x768@70Hz
[ 62.944] (II) AMDGPU(0): Manufacturer's mask: 10
[ 62.944] (II) AMDGPU(0): Supported standard timings:
[ 62.944] (II) AMDGPU(0): #0: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 62.944] (II) AMDGPU(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 62.944] (II) AMDGPU(0): #2: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 62.944] (II) AMDGPU(0): #3: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 62.944] (II) AMDGPU(0): #4: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 62.945] (II) AMDGPU(0): #5: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 62.945] (II) AMDGPU(0): #6: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 62.945] (II) AMDGPU(0): Supported detailed timing:
[ 62.945] (II) AMDGPU(0): clock: 106.5 MHz Image Size: 410 x 256 mm
[ 62.945] (II) AMDGPU(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0
[ 62.945] (II) AMDGPU(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0
[ 62.945] (II) AMDGPU(0): Serial No: A7LMIZ036304
[ 62.945] (II) AMDGPU(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 82 kHz, PixClock max 145 MHz
[ 62.945] (II) AMDGPU(0): Monitor name: ASUS VH198
[ 62.945] (II) AMDGPU(0): EDID (in hex):
[ 62.945] (II) AMDGPU(0): 00ffffffffffff000469e71901010101
[ 62.945] (II) AMDGPU(0): 1c14010380291a782ee5b5a355499927
[ 62.945] (II) AMDGPU(0): 135054af4c109500810081c08140714f
[ 62.945] (II) AMDGPU(0): 8180950f01019a29a0d0518422305098
[ 62.945] (II) AMDGPU(0): 36009a001100001c000000ff0041374c
[ 62.945] (II) AMDGPU(0): 4d495a3033363330340a000000fd0037
[ 62.945] (II) AMDGPU(0): 4b1e520e000a202020202020000000fc
[ 62.945] (II) AMDGPU(0): 00415355532056483139380a20200047
[ 62.945] (II) AMDGPU(0): Printing probed modes for output DVI-D-0
[ 62.945] (II) AMDGPU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz eP)
[ 62.945] (II) AMDGPU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 62.945] (II) AMDGPU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 62.945] (II) AMDGPU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 62.945] (II) AMDGPU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 62.945] (II) AMDGPU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 62.945] (II) AMDGPU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 62.945] (II) AMDGPU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 62.945] (II) AMDGPU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 62.945] (II) AMDGPU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 62.945] (II) AMDGPU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 62.945] (II) AMDGPU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 62.945] (II) AMDGPU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 62.945] (II) AMDGPU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 62.945] (II) AMDGPU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 62.945] (II) AMDGPU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 62.945] (II) AMDGPU(0): Output DisplayPort-0 disconnected
[ 62.945] (II) AMDGPU(0): Output HDMI-A-0 disconnected
[ 62.945] (II) AMDGPU(0): Output DVI-D-0 connected
[ 62.945] (II) AMDGPU(0): Using exact sizes for initial modes
[ 62.945] (II) AMDGPU(0): Output DVI-D-0 using initial mode 1440x900 +0+0
[ 62.945] (II) AMDGPU(0): mem size init: gart size :ffd3c000 vram size: s:ff6fc000 visible:f6fc000
[ 62.945] (**) AMDGPU(0): Display dimensions: (410, 260) mm
[ 62.945] (**) AMDGPU(0): DPI set to (89, 87)
[ 62.945] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[ 62.945] (II) Loading sub module "ramdac"
[ 62.945] (II) LoadModule: "ramdac"
[ 62.945] (II) Module "ramdac" already built-in
[ 62.945] (--) Depth 24 pixmap format is 32 bpp
[ 62.947] (II) AMDGPU(0): [DRI2] Setup complete
[ 62.947] (II) AMDGPU(0): [DRI2] DRI driver: radeonsi
[ 62.947] (II) AMDGPU(0): [DRI2] VDPAU driver: radeonsi
[ 62.947] (II) AMDGPU(0): Front buffer pitch: 6144 bytes
[ 62.948] (II) AMDGPU(0): SYNC extension fences enabled
[ 62.948] (II) AMDGPU(0): Present extension enabled
[ 62.948] (==) AMDGPU(0): DRI3 enabled
[ 62.948] (==) AMDGPU(0): Backing store enabled
[ 62.948] (II) AMDGPU(0): Direct rendering enabled
[ 62.969] (II) AMDGPU(0): Use GLAMOR acceleration.
[ 62.969] (II) AMDGPU(0): Acceleration enabled
[ 62.969] (**) AMDGPU(0): DPMS enabled
[ 62.969] (==) AMDGPU(0): Silken mouse enabled
[ 62.970] (II) AMDGPU(0): Set up textured video (glamor)
[ 62.970] (II) AMDGPU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 63.013] (--) RandR disabled
[ 63.018] (II) SELinux: Disabled on system
[ 63.021] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 63.021] (II) AIGLX: enabled GLX_ARB_create_context
[ 63.021] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 63.021] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 63.021] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 63.021] (II) AIGLX: enabled GLX_SGI_swap_control
[ 63.021] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 63.021] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 63.021] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 63.021] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 63.021] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 63.024] (II) AIGLX: Loaded and initialized radeonsi
[ 63.024] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 63.025] (II) AMDGPU(0): Setting screen physical size to 381 x 238
[ 63.098] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 63.098] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 63.099] (II) LoadModule: "evdev"
[ 63.099] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 63.100] (II) Module evdev: vendor="X.Org Foundation"
[ 63.100] compiled for 1.19.1, module version = 2.10.5
[ 63.100] Module class: X.Org XInput Driver
[ 63.100] ABI class: X.Org XInput driver, version 24.1
[ 63.100] (II) Using input driver 'evdev' for 'Power Button'
[ 63.101] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 27 paused 0
[ 63.101] (**) Power Button: always reports core events
[ 63.101] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 63.101] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 63.101] (--) evdev: Power Button: Found keys
[ 63.101] (II) evdev: Power Button: Configuring as keyboard
[ 63.101] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 63.101] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 63.101] (**) Option "xkb_rules" "evdev"
[ 63.101] (**) Option "xkb_model" "pc105"
[ 63.101] (**) Option "xkb_layout" "us"
[ 63.101] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 63.124] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 63.124] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 63.124] (II) Using input driver 'evdev' for 'Power Button'
[ 63.126] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 28 paused 0
[ 63.126] (**) Power Button: always reports core events
[ 63.126] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 63.126] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 63.126] (--) evdev: Power Button: Found keys
[ 63.126] (II) evdev: Power Button: Configuring as keyboard
[ 63.126] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 63.126] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 63.126] (**) Option "xkb_rules" "evdev"
[ 63.126] (**) Option "xkb_model" "pc105"
[ 63.126] (**) Option "xkb_layout" "us"
[ 63.126] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 63.127] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event15)
[ 63.127] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 63.127] (**) USB Optical Mouse: Applying InputClass "evdev-pointer"
[ 63.127] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 63.129] (II) systemd-logind: got fd for /dev/input/event15 13:79 fd 29 paused 0
[ 63.129] (**) USB Optical Mouse: always reports core events
[ 63.129] (**) evdev: USB Optical Mouse: Device: "/dev/input/event15"
[ 63.129] (**) evdev: USB Optical Mouse: ButtonMapping '1 2 3 0 0'
[ 63.129] (--) evdev: USB Optical Mouse: Vendor 0x15ca Product 0xc3
[ 63.129] (--) evdev: USB Optical Mouse: Found 3 mouse buttons
[ 63.129] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 63.130] (--) evdev: USB Optical Mouse: Found relative axes
[ 63.130] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 63.130] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 63.130] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 63.130] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 63.130] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 63.130] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-7/1-7:1.0/0003:15CA:00C3.0001/input/input15/event15"
[ 63.130] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 8)
[ 63.130] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 63.130] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 63.130] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 63.130] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 63.130] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 63.131] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[ 63.131] (**) USB Optical Mouse: Applying InputClass "evdev-pointer"
[ 63.131] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 63.131] (**) USB Optical Mouse: always reports core events
[ 63.131] (**) evdev: USB Optical Mouse: Device: "/dev/input/mouse0"
[ 63.131] (EE) evdev: USB Optical Mouse: Unable to query fd: Inappropriate ioctl for device
[ 63.152] (EE) PreInit returned 2 for "USB Optical Mouse"
[ 63.152] (II) UnloadModule: "evdev"
[ 63.153] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event5)
[ 63.153] (II) No input driver specified, ignoring this device.
[ 63.153] (II) This device may have been added with another device file.
[ 63.153] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event6)
[ 63.153] (II) No input driver specified, ignoring this device.
[ 63.153] (II) This device may have been added with another device file.
[ 63.154] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event7)
[ 63.154] (II) No input driver specified, ignoring this device.
[ 63.154] (II) This device may have been added with another device file.
[ 63.154] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event8)
[ 63.154] (II) No input driver specified, ignoring this device.
[ 63.154] (II) This device may have been added with another device file.
[ 63.155] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event9)
[ 63.155] (II) No input driver specified, ignoring this device.
[ 63.155] (II) This device may have been added with another device file.
[ 63.155] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event10)
[ 63.155] (II) No input driver specified, ignoring this device.
[ 63.155] (II) This device may have been added with another device file.
[ 63.156] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event11)
[ 63.156] (II) No input driver specified, ignoring this device.
[ 63.156] (II) This device may have been added with another device file.
[ 63.156] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event12)
[ 63.156] (II) No input driver specified, ignoring this device.
[ 63.156] (II) This device may have been added with another device file.
[ 63.156] (II) config/udev: Adding input device HD-Audio Generic Line Out (/dev/input/event13)
[ 63.156] (II) No input driver specified, ignoring this device.
[ 63.156] (II) This device may have been added with another device file.
[ 63.157] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event14)
[ 63.157] (II) No input driver specified, ignoring this device.
[ 63.157] (II) This device may have been added with another device file.
[ 63.157] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event4)
[ 63.157] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 63.157] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[ 63.159] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 30 paused 0
[ 63.159] (**) Eee PC WMI hotkeys: always reports core events
[ 63.159] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event4"
[ 63.159] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[ 63.159] (--) evdev: Eee PC WMI hotkeys: Found keys
[ 63.159] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[ 63.159] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input4/event4"
[ 63.159] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 9)
[ 63.159] (**) Option "xkb_rules" "evdev"
[ 63.159] (**) Option "xkb_model" "pc105"
[ 63.159] (**) Option "xkb_layout" "us"
[ 63.159] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 63.160] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 63.160] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 63.160] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 63.162] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 31 paused 0
[ 63.162] (**) AT Translated Set 2 keyboard: always reports core events
[ 63.162] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 63.162] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 63.162] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 63.162] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 63.162] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 63.162] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 63.162] (**) Option "xkb_rules" "evdev"
[ 63.162] (**) Option "xkb_model" "pc105"
[ 63.162] (**) Option "xkb_layout" "us"
[ 63.162] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 63.162] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 63.162] (II) No input driver specified, ignoring this device.
[ 63.162] (II) This device may have been added with another device file.
[ 63.162] (II) config/udev: Adding input device (unnamed) (/dev/ttyS1)
[ 63.162] (II) No input driver specified, ignoring this device.
[ 63.162] (II) This device may have been added with another device file.
[ 63.163] (II) config/udev: Adding input device (unnamed) (/dev/ttyS2)
[ 63.163] (II) No input driver specified, ignoring this device.
[ 63.163] (II) This device may have been added with another device file.
[ 63.163] (II) config/udev: Adding input device (unnamed) (/dev/ttyS3)
[ 63.163] (II) No input driver specified, ignoring this device.
[ 63.163] (II) This device may have been added with another device file.
[ 63.163] (II) config/udev: Adding input device (unnamed) (/dev/ttyS0)
[ 63.163] (II) No input driver specified, ignoring this device.
[ 63.163] (II) This device may have been added with another device file.
[ 63.163] (II) config/udev: Adding input device (unnamed) (/dev/input/mice)
[ 63.163] (II) No input driver specified, ignoring this device.
[ 63.163] (II) This device may have been added with another device file.
[ 63.163] (II) config/udev: Adding input device (unnamed) (/dev/console)
[ 63.163] (II) No input driver specified, ignoring this device.
[ 63.163] (II) This device may have been added with another device file.
[ 63.163] (II) config/udev: Adding input device (unnamed) (/dev/ptmx)
[ 63.163] (II) No input driver specified, ignoring this device.
[ 63.163] (II) This device may have been added with another device file.
[ 63.163] (II) config/udev: Adding input device (unnamed) (/dev/tty)
[ 63.163] (II) No input driver specified, ignoring this device.
[ 63.163] (II) This device may have been added with another device file.
[ 63.163] (II) config/udev: Adding input device (unnamed) (/dev/tty0)
[ 63.163] (II) No input driver specified, ignoring this device.
[ 63.163] (II) This device may have been added with another device file.
[ 63.163] (II) config/udev: Adding input device (unnamed) (/dev/tty1)
[ 63.163] (II) No input driver specified, ignoring this device.
[ 63.163] (II) This device may have been added with another device file.
[ 63.163] (II) config/udev: Adding input device (unnamed) (/dev/tty10)
[ 63.163] (II) No input driver specified, ignoring this device.
[ 63.163] (II) This device may have been added with another device file.
[ 63.164] (II) config/udev: Adding input device (unnamed) (/dev/tty11)
[ 63.164] (II) No input driver specified, ignoring this device.
[ 63.164] (II) This device may have been added with another device file.
[ 63.164] (II) config/udev: Adding input device (unnamed) (/dev/tty12)
[ 63.164] (II) No input driver specified, ignoring this device.
[ 63.164] (II) This device may have been added with another device file.
[ 63.164] (II) config/udev: Adding input device (unnamed) (/dev/tty13)
[ 63.164] (II) No input driver specified, ignoring this device.
[ 63.164] (II) This device may have been added with another device file.
[ 63.164] (II) config/udev: Adding input device (unnamed) (/dev/tty14)
[ 63.164] (II) No input driver specified, ignoring this device.
[ 63.164] (II) This device may have been added with another device file.
[ 63.164] (II) config/udev: Adding input device (unnamed) (/dev/tty15)
[ 63.164] (II) No input driver specified, ignoring this device.
[ 63.164] (II) This device may have been added with another device file.
[ 63.164] (II) config/udev: Adding input device (unnamed) (/dev/tty16)
[ 63.164] (II) No input driver specified, ignoring this device.
[ 63.164] (II) This device may have been added with another device file.
[ 63.164] (II) config/udev: Adding input device (unnamed) (/dev/tty17)
[ 63.164] (II) No input driver specified, ignoring this device.
[ 63.164] (II) This device may have been added with another device file.
[ 63.164] (II) config/udev: Adding input device (unnamed) (/dev/tty18)
[ 63.164] (II) No input driver specified, ignoring this device.
[ 63.164] (II) This device may have been added with another device file.
[ 63.164] (II) config/udev: Adding input device (unnamed) (/dev/tty19)
[ 63.164] (II) No input driver specified, ignoring this device.
[ 63.164] (II) This device may have been added with another device file.
[ 63.164] (II) config/udev: Adding input device (unnamed) (/dev/tty2)
[ 63.164] (II) No input driver specified, ignoring this device.
[ 63.164] (II) This device may have been added with another device file.
[ 63.165] (II) config/udev: Adding input device (unnamed) (/dev/tty20)
[ 63.165] (II) No input driver specified, ignoring this device.
[ 63.165] (II) This device may have been added with another device file.
[ 63.165] (II) config/udev: Adding input device (unnamed) (/dev/tty21)
[ 63.165] (II) No input driver specified, ignoring this device.
[ 63.165] (II) This device may have been added with another device file.
[ 63.165] (II) config/udev: Adding input device (unnamed) (/dev/tty22)
[ 63.165] (II) No input driver specified, ignoring this device.
[ 63.165] (II) This device may have been added with another device file.
[ 63.165] (II) config/udev: Adding input device (unnamed) (/dev/tty23)
[ 63.165] (II) No input driver specified, ignoring this device.
[ 63.165] (II) This device may have been added with another device file.
[ 63.165] (II) config/udev: Adding input device (unnamed) (/dev/tty24)
[ 63.165] (II) No input driver specified, ignoring this device.
[ 63.165] (II) This device may have been added with another device file.
[ 63.165] (II) config/udev: Adding input device (unnamed) (/dev/tty25)
[ 63.165] (II) No input driver specified, ignoring this device.
[ 63.165] (II) This device may have been added with another device file.
[ 63.165] (II) config/udev: Adding input device (unnamed) (/dev/tty26)
[ 63.165] (II) No input driver specified, ignoring this device.
[ 63.165] (II) This device may have been added with another device file.
[ 63.165] (II) config/udev: Adding input device (unnamed) (/dev/tty27)
[ 63.165] (II) No input driver specified, ignoring this device.
[ 63.165] (II) This device may have been added with another device file.
[ 63.165] (II) config/udev: Adding input device (unnamed) (/dev/tty28)
[ 63.165] (II) No input driver specified, ignoring this device.
[ 63.165] (II) This device may have been added with another device file.
[ 63.165] (II) config/udev: Adding input device (unnamed) (/dev/tty29)
[ 63.165] (II) No input driver specified, ignoring this device.
[ 63.165] (II) This device may have been added with another device file.
[ 63.165] (II) config/udev: Adding input device (unnamed) (/dev/tty3)
[ 63.165] (II) No input driver specified, ignoring this device.
[ 63.165] (II) This device may have been added with another device file.
[ 63.166] (II) config/udev: Adding input device (unnamed) (/dev/tty30)
[ 63.166] (II) No input driver specified, ignoring this device.
[ 63.166] (II) This device may have been added with another device file.
[ 63.166] (II) config/udev: Adding input device (unnamed) (/dev/tty31)
[ 63.166] (II) No input driver specified, ignoring this device.
[ 63.166] (II) This device may have been added with another device file.
[ 63.166] (II) config/udev: Adding input device (unnamed) (/dev/tty32)
[ 63.166] (II) No input driver specified, ignoring this device.
[ 63.166] (II) This device may have been added with another device file.
[ 63.166] (II) config/udev: Adding input device (unnamed) (/dev/tty33)
[ 63.166] (II) No input driver specified, ignoring this device.
[ 63.166] (II) This device may have been added with another device file.
[ 63.166] (II) config/udev: Adding input device (unnamed) (/dev/tty34)
[ 63.166] (II) No input driver specified, ignoring this device.
[ 63.166] (II) This device may have been added with another device file.
[ 63.166] (II) config/udev: Adding input device (unnamed) (/dev/tty35)
[ 63.166] (II) No input driver specified, ignoring this device.
[ 63.166] (II) This device may have been added with another device file.
[ 63.166] (II) config/udev: Adding input device (unnamed) (/dev/tty36)
[ 63.166] (II) No input driver specified, ignoring this device.
[ 63.166] (II) This device may have been added with another device file.
[ 63.166] (II) config/udev: Adding input device (unnamed) (/dev/tty37)
[ 63.166] (II) No input driver specified, ignoring this device.
[ 63.166] (II) This device may have been added with another device file.
[ 63.166] (II) config/udev: Adding input device (unnamed) (/dev/tty38)
[ 63.166] (II) No input driver specified, ignoring this device.
[ 63.166] (II) This device may have been added with another device file.
[ 63.166] (II) config/udev: Adding input device (unnamed) (/dev/tty39)
[ 63.166] (II) No input driver specified, ignoring this device.
[ 63.166] (II) This device may have been added with another device file.
[ 63.166] (II) config/udev: Adding input device (unnamed) (/dev/tty4)
[ 63.166] (II) No input driver specified, ignoring this device.
[ 63.166] (II) This device may have been added with another device file.
[ 63.167] (II) config/udev: Adding input device (unnamed) (/dev/tty40)
[ 63.167] (II) No input driver specified, ignoring this device.
[ 63.167] (II) This device may have been added with another device file.
[ 63.167] (II) config/udev: Adding input device (unnamed) (/dev/tty41)
[ 63.167] (II) No input driver specified, ignoring this device.
[ 63.167] (II) This device may have been added with another device file.
[ 63.167] (II) config/udev: Adding input device (unnamed) (/dev/tty42)
[ 63.167] (II) No input driver specified, ignoring this device.
[ 63.167] (II) This device may have been added with another device file.
[ 63.167] (II) config/udev: Adding input device (unnamed) (/dev/tty43)
[ 63.167] (II) No input driver specified, ignoring this device.
[ 63.167] (II) This device may have been added with another device file.
[ 63.167] (II) config/udev: Adding input device (unnamed) (/dev/tty44)
[ 63.167] (II) No input driver specified, ignoring this device.
[ 63.167] (II) This device may have been added with another device file.
[ 63.167] (II) config/udev: Adding input device (unnamed) (/dev/tty45)
[ 63.167] (II) No input driver specified, ignoring this device.
[ 63.167] (II) This device may have been added with another device file.
[ 63.167] (II) config/udev: Adding input device (unnamed) (/dev/tty46)
[ 63.167] (II) No input driver specified, ignoring this device.
[ 63.167] (II) This device may have been added with another device file.
[ 63.167] (II) config/udev: Adding input device (unnamed) (/dev/tty47)
[ 63.167] (II) No input driver specified, ignoring this device.
[ 63.167] (II) This device may have been added with another device file.
[ 63.167] (II) config/udev: Adding input device (unnamed) (/dev/tty48)
[ 63.167] (II) No input driver specified, ignoring this device.
[ 63.167] (II) This device may have been added with another device file.
[ 63.167] (II) config/udev: Adding input device (unnamed) (/dev/tty49)
[ 63.167] (II) No input driver specified, ignoring this device.
[ 63.167] (II) This device may have been added with another device file.
[ 63.167] (II) config/udev: Adding input device (unnamed) (/dev/tty5)
[ 63.167] (II) No input driver specified, ignoring this device.
[ 63.167] (II) This device may have been added with another device file.
[ 63.168] (II) config/udev: Adding input device (unnamed) (/dev/tty50)
[ 63.168] (II) No input driver specified, ignoring this device.
[ 63.168] (II) This device may have been added with another device file.
[ 63.168] (II) config/udev: Adding input device (unnamed) (/dev/tty51)
[ 63.168] (II) No input driver specified, ignoring this device.
[ 63.168] (II) This device may have been added with another device file.
[ 63.168] (II) config/udev: Adding input device (unnamed) (/dev/tty52)
[ 63.168] (II) No input driver specified, ignoring this device.
[ 63.168] (II) This device may have been added with another device file.
[ 63.168] (II) config/udev: Adding input device (unnamed) (/dev/tty53)
[ 63.168] (II) No input driver specified, ignoring this device.
[ 63.168] (II) This device may have been added with another device file.
[ 63.168] (II) config/udev: Adding input device (unnamed) (/dev/tty54)
[ 63.168] (II) No input driver specified, ignoring this device.
[ 63.168] (II) This device may have been added with another device file.
[ 63.168] (II) config/udev: Adding input device (unnamed) (/dev/tty55)
[ 63.168] (II) No input driver specified, ignoring this device.
[ 63.168] (II) This device may have been added with another device file.
[ 63.168] (II) config/udev: Adding input device (unnamed) (/dev/tty56)
[ 63.168] (II) No input driver specified, ignoring this device.
[ 63.168] (II) This device may have been added with another device file.
[ 63.168] (II) config/udev: Adding input device (unnamed) (/dev/tty57)
[ 63.168] (II) No input driver specified, ignoring this device.
[ 63.168] (II) This device may have been added with another device file.
[ 63.168] (II) config/udev: Adding input device (unnamed) (/dev/tty58)
[ 63.168] (II) No input driver specified, ignoring this device.
[ 63.168] (II) This device may have been added with another device file.
[ 63.168] (II) config/udev: Adding input device (unnamed) (/dev/tty59)
[ 63.168] (II) No input driver specified, ignoring this device.
[ 63.168] (II) This device may have been added with another device file.
[ 63.169] (II) config/udev: Adding input device (unnamed) (/dev/tty6)
[ 63.169] (II) No input driver specified, ignoring this device.
[ 63.169] (II) This device may have been added with another device file.
[ 63.169] (II) config/udev: Adding input device (unnamed) (/dev/tty60)
[ 63.169] (II) No input driver specified, ignoring this device.
[ 63.169] (II) This device may have been added with another device file.
[ 63.169] (II) config/udev: Adding input device (unnamed) (/dev/tty61)
[ 63.169] (II) No input driver specified, ignoring this device.
[ 63.169] (II) This device may have been added with another device file.
[ 63.169] (II) config/udev: Adding input device (unnamed) (/dev/tty62)
[ 63.169] (II) No input driver specified, ignoring this device.
[ 63.169] (II) This device may have been added with another device file.
[ 63.169] (II) config/udev: Adding input device (unnamed) (/dev/tty63)
[ 63.169] (II) No input driver specified, ignoring this device.
[ 63.169] (II) This device may have been added with another device file.
[ 63.169] (II) config/udev: Adding input device (unnamed) (/dev/tty7)
[ 63.169] (II) No input driver specified, ignoring this device.
[ 63.169] (II) This device may have been added with another device file.
[ 63.169] (II) config/udev: Adding input device (unnamed) (/dev/tty8)
[ 63.169] (II) No input driver specified, ignoring this device.
[ 63.169] (II) This device may have been added with another device file.
[ 63.169] (II) config/udev: Adding input device (unnamed) (/dev/tty9)
[ 63.169] (II) No input driver specified, ignoring this device.
[ 63.169] (II) This device may have been added with another device file.
[ 64.260] (II) AMDGPU(0): EDID vendor "ACI", prod id 6631
[ 64.260] (II) AMDGPU(0): Using hsync ranges from config file
[ 64.260] (II) AMDGPU(0): Using vrefresh ranges from config file
[ 64.260] (II) AMDGPU(0): Printing DDC gathered Modelines:
[ 64.260] (II) AMDGPU(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz eP)
[ 64.260] (II) AMDGPU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 64.260] (II) AMDGPU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 64.260] (II) AMDGPU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 64.260] (II) AMDGPU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 64.260] (II) AMDGPU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 64.260] (II) AMDGPU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 64.260] (II) AMDGPU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 64.260] (II) AMDGPU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 64.260] (II) AMDGPU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 64.260] (II) AMDGPU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 64.260] (II) AMDGPU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 64.260] (II) AMDGPU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 64.260] (II) AMDGPU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 64.260] (II) AMDGPU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 64.260] (II) AMDGPU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 64.260] (II) AMDGPU(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 64.708] (II) AMDGPU(0): EDID vendor "ACI", prod id 6631
[ 64.708] (II) AMDGPU(0): Using hsync ranges from config file
[ 64.708] (II) AMDGPU(0): Using vrefresh ranges from config file
[ 64.708] (II) AMDGPU(0): Printing DDC gathered Modelines:
[ 64.708] (II) AMDGPU(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz eP)
[ 64.708] (II) AMDGPU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 64.708] (II) AMDGPU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 64.708] (II) AMDGPU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 64.708] (II) AMDGPU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 64.708] (II) AMDGPU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 64.708] (II) AMDGPU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 64.708] (II) AMDGPU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 64.708] (II) AMDGPU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 64.708] (II) AMDGPU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 64.708] (II) AMDGPU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 64.708] (II) AMDGPU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 64.708] (II) AMDGPU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 64.708] (II) AMDGPU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 64.708] (II) AMDGPU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 64.708] (II) AMDGPU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 64.708] (II) AMDGPU(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 285.243] (II) evdev: AT Translated Set 2 keyboard: Close
[ 285.243] (II) UnloadModule: "evdev"
[ 285.243] (II) systemd-logind: releasing fd for 13:64
[ 285.272] (II) evdev: Eee PC WMI hotkeys: Close
[ 285.272] (II) UnloadModule: "evdev"
[ 285.272] (II) systemd-logind: releasing fd for 13:68
[ 285.328] (II) evdev: USB Optical Mouse: Close
[ 285.328] (II) UnloadModule: "evdev"
[ 285.328] (II) systemd-logind: releasing fd for 13:79
[ 285.364] (II) evdev: Power Button: Close
[ 285.364] (II) UnloadModule: "evdev"
[ 285.364] (II) systemd-logind: releasing fd for 13:65
[ 285.392] (II) evdev: Power Button: Close
[ 285.392] (II) UnloadModule: "evdev"
[ 285.392] (II) systemd-logind: releasing fd for 13:66
[ 285.425] (II) Server terminated successfully (0). Closing log file.
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=31524619
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2
N: input/event2
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: LIBINPUT_DEVICE_GROUP=19/0/1:LNXPWRBN/button
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=31638146
E: XKBLAYOUT=us
E: XKBMODEL=pc105
E: XKBOPTIONS=terminate:ctrl_alt_bksp
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0C_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="PNP0C0C/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=31524668
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1
N: input/event1
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: LIBINPUT_DEVICE_GROUP=19/0/1:PNP0C0C/button
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=31603160
E: XKBLAYOUT=us
E: XKBMODEL=pc105
E: XKBOPTIONS=terminate:ctrl_alt_bksp
P: /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-7/1-7:1.0/0003:15CA:00C3.0001/input/input15
E: DEVPATH=/devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-7/1-7:1.0/0003:15CA:00C3.0001/input/input15
E: EV=17
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_02_00_0-usb-0_7_1_0
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Optical_Mouse
E: ID_MODEL_ENC=USB\x20Optical\x20Mouse
E: ID_MODEL_ID=00c3
E: ID_PATH=pci-0000:02:00.0-usb-0:7:1.0
E: ID_PATH_TAG=pci-0000_02_00_0-usb-0_7_1_0
E: ID_REVISION=0512
E: ID_SERIAL=15ca_USB_Optical_Mouse
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=15ca
E: ID_VENDOR_ENC=15ca
E: ID_VENDOR_ID=15ca
E: KEY=70000 0 0 0 0
E: MODALIAS=input:b0003v15CAp00C3e0110-e0,1,2,4,k110,111,112,r0,1,8,am4,lsfw
E: MSC=10
E: NAME="USB Optical Mouse"
E: PHYS="usb-0000:02:00.0-7/input0"
E: PRODUCT=3/15ca/c3/110
E: PROP=0
E: REL=103
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=32331741
P: /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-7/1-7:1.0/0003:15CA:00C3.0001/input/input15/event15
N: input/event15
S: input/by-id/usb-15ca_USB_Optical_Mouse-event-mouse
S: input/by-path/pci-0000:02:00.0-usb-0:7:1.0-event-mouse
E: DEVLINKS=/dev/input/by-id/usb-15ca_USB_Optical_Mouse-event-mouse /dev/input/by-path/pci-0000:02:00.0-usb-0:7:1.0-event-mouse
E: DEVNAME=/dev/input/event15
E: DEVPATH=/devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-7/1-7:1.0/0003:15CA:00C3.0001/input/input15/event15
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Optical_Mouse
E: ID_MODEL_ENC=USB\x20Optical\x20Mouse
E: ID_MODEL_ID=00c3
E: ID_PATH=pci-0000:02:00.0-usb-0:7:1.0
E: ID_PATH_TAG=pci-0000_02_00_0-usb-0_7_1_0
E: ID_REVISION=0512
E: ID_SERIAL=15ca_USB_Optical_Mouse
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=15ca
E: ID_VENDOR_ENC=15ca
E: ID_VENDOR_ID=15ca
E: LIBINPUT_DEVICE_GROUP=3/15ca/c3:usb-0000:02:00.0-7
E: MAJOR=13
E: MINOR=79
E: SUBSYSTEM=input
E: USEC_INITIALIZED=32433964
P: /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-7/1-7:1.0/0003:15CA:00C3.0001/input/input15/mouse0
N: input/mouse0
S: input/by-id/usb-15ca_USB_Optical_Mouse-mouse
S: input/by-path/pci-0000:02:00.0-usb-0:7:1.0-mouse
E: DEVLINKS=/dev/input/by-path/pci-0000:02:00.0-usb-0:7:1.0-mouse /dev/input/by-id/usb-15ca_USB_Optical_Mouse-mouse
E: DEVNAME=/dev/input/mouse0
E: DEVPATH=/devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-7/1-7:1.0/0003:15CA:00C3.0001/input/input15/mouse0
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Optical_Mouse
E: ID_MODEL_ENC=USB\x20Optical\x20Mouse
E: ID_MODEL_ID=00c3
E: ID_PATH=pci-0000:02:00.0-usb-0:7:1.0
E: ID_PATH_TAG=pci-0000_02_00_0-usb-0_7_1_0
E: ID_REVISION=0512
E: ID_SERIAL=15ca_USB_Optical_Mouse
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=15ca
E: ID_VENDOR_ENC=15ca
E: ID_VENDOR_ID=15ca
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: USEC_INITIALIZED=32335710
P: /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input5
E: DEVPATH=/devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input5
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_0a_00_1
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:0a:00.1
E: ID_PATH_TAG=pci-0000_0a_00_1
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA ATI HDMI HDMI/DP,pcm=3"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=31603524
P: /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input5/event5
N: input/event5
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input5/event5
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:0a:00.1
E: ID_PATH_TAG=pci-0000_0a_00_1
E: LIBINPUT_DEVICE_GROUP=0/0/0:ALSA
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=31758063
P: /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input6
E: DEVPATH=/devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input6
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_0a_00_1
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:0a:00.1
E: ID_PATH_TAG=pci-0000_0a_00_1
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA ATI HDMI HDMI/DP,pcm=7"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=31603368
P: /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input6/event6
N: input/event6
E: DEVNAME=/dev/input/event6
E: DEVPATH=/devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input6/event6
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:0a:00.1
E: ID_PATH_TAG=pci-0000_0a_00_1
E: LIBINPUT_DEVICE_GROUP=0/0/0:ALSA
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=31734556
P: /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input7
E: DEVPATH=/devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input7
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_0a_00_1
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:0a:00.1
E: ID_PATH_TAG=pci-0000_0a_00_1
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA ATI HDMI HDMI/DP,pcm=8"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=31603368
P: /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input7/event7
N: input/event7
E: DEVNAME=/dev/input/event7
E: DEVPATH=/devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input7/event7
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:0a:00.1
E: ID_PATH_TAG=pci-0000_0a_00_1
E: LIBINPUT_DEVICE_GROUP=0/0/0:ALSA
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=31732538
P: /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input8
E: DEVPATH=/devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input8
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_0a_00_1
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:0a:00.1
E: ID_PATH_TAG=pci-0000_0a_00_1
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA ATI HDMI HDMI/DP,pcm=9"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=31603896
P: /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input8/event8
N: input/event8
E: DEVNAME=/dev/input/event8
E: DEVPATH=/devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input8/event8
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:0a:00.1
E: ID_PATH_TAG=pci-0000_0a_00_1
E: LIBINPUT_DEVICE_GROUP=0/0/0:ALSA
E: MAJOR=13
E: MINOR=72
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=31734710
P: /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input9
E: DEVPATH=/devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input9
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_0a_00_1
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:0a:00.1
E: ID_PATH_TAG=pci-0000_0a_00_1
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA ATI HDMI HDMI/DP,pcm=10"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=31604134
P: /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input9/event9
N: input/event9
E: DEVNAME=/dev/input/event9
E: DEVPATH=/devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input9/event9
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:0a:00.1
E: ID_PATH_TAG=pci-0000_0a_00_1
E: LIBINPUT_DEVICE_GROUP=0/0/0:ALSA
E: MAJOR=13
E: MINOR=73
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=31759397
P: /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input10
E: DEVPATH=/devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input10
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_0c_00_3
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:0c:00.3
E: ID_PATH_TAG=pci-0000_0c_00_3
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4,
E: NAME="HD-Audio Generic Front Mic"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=10
E: TAGS=:seat:
E: USEC_INITIALIZED=31651970
P: /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input10/event10
N: input/event10
E: DEVNAME=/dev/input/event10
E: DEVPATH=/devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input10/event10
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:0c:00.3
E: ID_PATH_TAG=pci-0000_0c_00_3
E: LIBINPUT_DEVICE_GROUP=0/0/0:ALSA
E: MAJOR=13
E: MINOR=74
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=31862638
P: /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input11
E: DEVPATH=/devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input11
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_0c_00_3
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:0c:00.3
E: ID_PATH_TAG=pci-0000_0c_00_3
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4,
E: NAME="HD-Audio Generic Rear Mic"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=10
E: TAGS=:seat:
E: USEC_INITIALIZED=31652217
P: /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input11/event11
N: input/event11
E: DEVNAME=/dev/input/event11
E: DEVPATH=/devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input11/event11
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:0c:00.3
E: ID_PATH_TAG=pci-0000_0c_00_3
E: LIBINPUT_DEVICE_GROUP=0/0/0:ALSA
E: MAJOR=13
E: MINOR=75
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=31871371
P: /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input12
E: DEVPATH=/devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input12
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_0c_00_3
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:0c:00.3
E: ID_PATH_TAG=pci-0000_0c_00_3
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfwD,
E: NAME="HD-Audio Generic Line"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=2000
E: TAGS=:seat:
E: USEC_INITIALIZED=31651914
P: /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input12/event12
N: input/event12
E: DEVNAME=/dev/input/event12
E: DEVPATH=/devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input12/event12
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:0c:00.3
E: ID_PATH_TAG=pci-0000_0c_00_3
E: LIBINPUT_DEVICE_GROUP=0/0/0:ALSA
E: MAJOR=13
E: MINOR=76
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=31866299
P: /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input13
E: DEVPATH=/devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input13
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_0c_00_3
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:0c:00.3
E: ID_PATH_TAG=pci-0000_0c_00_3
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,
E: NAME="HD-Audio Generic Line Out"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=40
E: TAGS=:seat:
E: USEC_INITIALIZED=31651817
P: /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input13/event13
N: input/event13
E: DEVNAME=/dev/input/event13
E: DEVPATH=/devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input13/event13
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:0c:00.3
E: ID_PATH_TAG=pci-0000_0c_00_3
E: LIBINPUT_DEVICE_GROUP=0/0/0:ALSA
E: MAJOR=13
E: MINOR=77
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=31866532
P: /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input14
E: DEVPATH=/devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input14
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_0c_00_3
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:0c:00.3
E: ID_PATH_TAG=pci-0000_0c_00_3
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2,
E: NAME="HD-Audio Generic Front Headphone"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=4
E: TAGS=:seat:
E: USEC_INITIALIZED=31651899
P: /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input14/event14
N: input/event14
E: DEVNAME=/dev/input/event14
E: DEVPATH=/devices/pci0000:00/0000:00:08.1/0000:0c:00.3/sound/card1/input14/event14
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:0c:00.3
E: ID_PATH_TAG=pci-0000_0c_00_3
E: LIBINPUT_DEVICE_GROUP=0/0/0:ALSA
E: MAJOR=13
E: MINOR=78
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=31758436
P: /devices/platform/eeepc-wmi/input/input4
E: DEVPATH=/devices/platform/eeepc-wmi/input/input4
E: EV=100013
E: ID_FOR_SEAT=input-platform-eeepc-wmi
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=platform-eeepc-wmi
E: ID_PATH_TAG=platform-eeepc-wmi
E: KEY=7e40000 0 800000000000 0 0 1400b00100000 300180001100800 e000000000000 2
E: MODALIAS=input:b0019v0000p0000e0000-e0,1,4,14,k71,72,73,8B,94,98,AB,AC,B8,B9,D4,E0,E1,E3,EE,F0,1AF,212,215,216,217,218,219,21A,ram4,lsfw
E: MSC=10
E: NAME="Eee PC WMI hotkeys"
E: PHYS="eeepc-wmi/input0"
E: PRODUCT=19/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=31581326
P: /devices/platform/eeepc-wmi/input/input4/event4
N: input/event4
S: input/by-path/platform-eeepc-wmi-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/platform-eeepc-wmi-event
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/platform/eeepc-wmi/input/input4/event4
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=platform-eeepc-wmi
E: ID_PATH_TAG=platform-eeepc-wmi
E: LIBINPUT_DEVICE_GROUP=19/0/0:eeepc-wmi
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=31715086
E: XKBLAYOUT=us
E: XKBMODEL=pc105
E: XKBOPTIONS=terminate:ctrl_alt_bksp
P: /devices/platform/i8042/serio0/input/input0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: EV=120013
E: ID_BUS=i8042
E: ID_FOR_SEAT=input-platform-i8042-serio-0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
E: LED=7
E: MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PRODUCT=11/1/1/ab41
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=635281
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: ID_BUS=i8042
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: LIBINPUT_ATTR_KEYBOARD_INTEGRATION=internal
E: LIBINPUT_DEVICE_GROUP=11/1/1:isa0060/serio0
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=31602834
E: XKBLAYOUT=us
E: XKBMODEL=pc105
E: XKBOPTIONS=terminate:ctrl_alt_bksp
P: /devices/platform/pcspkr/input/input3
E: DEVPATH=/devices/platform/pcspkr/input/input3
E: EV=40001
E: ID_FOR_SEAT=input-platform-pcspkr
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PRODUCT=10/1f/1/100
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=31526630
P: /devices/platform/pcspkr/input/input3/event3
N: input/event3
S: input/by-path/platform-pcspkr-event-spkr
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/platform/pcspkr/input/input3/event3
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: LIBINPUT_DEVICE_GROUP=10/1f/1:isa0061
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: USEC_INITIALIZED=31636628
DRM Information from dmesg:
---------------------------
-- System Information:
Debian Release: buster/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 4.16.0-1-amd64 (SMP w/16 CPU cores)
Locale: LANG=en_CA.UTF-8, LC_CTYPE=en_CA.UTF-8 (charmap=UTF-8), LANGUAGE=en_CA:en (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages xserver-xorg-video-amdgpu depends on:
ii libc6 2.27-3
ii libdrm-amdgpu1 2.4.92-1
ii libgbm1 18.0.3-1
ii libudev1 238-4
ii xserver-xorg-core [xorg-video-abi-23] 2:1.19.6-1
xserver-xorg-video-amdgpu recommends no packages.
Versions of packages xserver-xorg-video-amdgpu suggests:
ii firmware-amd-graphics 20170823-1
-- no debconf information
Information forwarded
to debian-bugs-dist@lists.debian.org, Debian X Strike Force <debian-x@lists.debian.org>:
Bug#900087; Package xserver-xorg-video-amdgpu.
(Sat, 26 May 2018 21:30:03 GMT) (full text, mbox, link).
Acknowledgement sent
to "Alan W. Irwin" <Alan.W.Irwin1234@gmail.com>:
Extra info received and forwarded to list. Copy sent to Debian X Strike Force <debian-x@lists.debian.org>.
(Sat, 26 May 2018 21:30:03 GMT) (full text, mbox, link).
Message #10 received at 900087@bugs.debian.org (full text, mbox, reply):
So far my experiment to bypass the RX 550 by displaying on another computer has been a success, i.e., no lock up issues have been encountered under this mode of operation. So it is a rather short (roughly one day) test so far but still consistent with the hypothesis that the lock ups are likely caused by an issue with xserver-xorg-video-amdgpu itself or the kernel functions that are used by that device driver. Also, assuming I have now found a stable mode of operation for this new computer that is not subject to lock ups, I would like to test the RX 550 for latest kernel and X to see if the lock ups (for direct display) go away. Can you advise on the best way to build the latest kernel and X so those choices are easy to use with Debian Buster without compromising the Debian Buster versions of kernel and X? (I am experienced at software builds, but it has been many years since I built the Linux kernel, and I have no experience building X, yet.) I have also reported this bug upstream at <https://bugs.freedesktop.org/show_bug.cgi?id=106671> in case the X developers have helpful advice about working around the problem or want me to perform some specific tests. Alan __________________________ Alan W. Irwin Astronomical research affiliation with Department of Physics and Astronomy, University of Victoria (astrowww.phys.uvic.ca). Programming affiliations with the FreeEOS equation-of-state implementation for stellar interiors (freeeos.sf.net); the Time Ephemerides project (timeephem.sf.net); PLplot scientific plotting software package (plplot.sf.net); the libLASi project (unifont.org/lasi); the Loads of Linux Links project (loll.sf.net); and the Linux Brochure Project (lbproject.sf.net). __________________________ Linux-powered Science __________________________
Information forwarded
to debian-bugs-dist@lists.debian.org, Debian X Strike Force <debian-x@lists.debian.org>:
Bug#900087; Package xserver-xorg-video-amdgpu.
(Sat, 02 Jun 2018 17:09:03 GMT) (full text, mbox, link).
Acknowledgement sent
to "Alan W. Irwin" <Alan.W.Irwin1234@gmail.com>:
Extra info received and forwarded to list. Copy sent to Debian X Strike Force <debian-x@lists.debian.org>.
(Sat, 02 Jun 2018 17:09:04 GMT) (full text, mbox, link).
Message #15 received at 900087@bugs.debian.org (full text, mbox, reply):
The propagation of kernel 4.16.12 from Sid to Buster has greatly improved this situation, i.e., no lock ups so far (uptime approaching 3 days since I switched to 4.16.12 from 4.16.5) and may have completely solved it. For further details see <https://bugs.freedesktop.org/show_bug.cgi?id=106671>. I would like to see what sort of maximum uptime I can now achieve with this card without lock ups and report that here for the benefit of other Debian users of AMD RX 550 graphics cards so please leave this bug open for at least several more months. Alan __________________________ Alan W. Irwin Astronomical research affiliation with Department of Physics and Astronomy, University of Victoria (astrowww.phys.uvic.ca). Programming affiliations with the FreeEOS equation-of-state implementation for stellar interiors (freeeos.sf.net); the Time Ephemerides project (timeephem.sf.net); PLplot scientific plotting software package (plplot.sf.net); the libLASi project (unifont.org/lasi); the Loads of Linux Links project (loll.sf.net); and the Linux Brochure Project (lbproject.sf.net). __________________________ Linux-powered Science __________________________
Information forwarded
to debian-bugs-dist@lists.debian.org, Debian X Strike Force <debian-x@lists.debian.org>:
Bug#900087; Package xserver-xorg-video-amdgpu.
(Sat, 23 Jun 2018 18:39:05 GMT) (full text, mbox, link).
Acknowledgement sent
to "Alan W. Irwin" <Alan.W.Irwin1234@gmail.com>:
Extra info received and forwarded to list. Copy sent to Debian X Strike Force <debian-x@lists.debian.org>.
(Sat, 23 Jun 2018 18:39:05 GMT) (full text, mbox, link).
Message #20 received at 900087@bugs.debian.org (full text, mbox, reply):
On 2018-06-02 10:07-0700 Alan W. Irwin wrote: > The propagation of kernel 4.16.12 from Sid to Buster has greatly > improved this situation, i.e., no lock ups so far (uptime approaching > 3 days since I switched to 4.16.12 from 4.16.5) and may have > completely solved it. [...] Well, further experience showed lockups occurred roughly as often for 4.16.12 as for 4.16.5. So currently I am only able to use this computer in a reliable way using an X-terminal (an alternate computer with a different X server that runs "X -query <name of this computer>" to control and display remote desktop results that are running on this computer). Therefore I plan to wait for kernel 4.17.x (which apparently has many graphics fixes for modern AMD cards such as the RX 550) to propagate to Buster before I try this computer again with a local X server, i.e., direct use rather than X-terminal use. Alan __________________________ Alan W. Irwin Programming affiliations with the FreeEOS equation-of-state implementation for stellar interiors (freeeos.sf.net); the Time Ephemerides project (timeephem.sf.net); PLplot scientific plotting software package (plplot.sf.net); the libLASi project (unifont.org/lasi); the Loads of Linux Links project (loll.sf.net); and the Linux Brochure Project (lbproject.sf.net). __________________________ Linux-powered Science __________________________
Information forwarded
to debian-bugs-dist@lists.debian.org, Debian X Strike Force <debian-x@lists.debian.org>:
Bug#900087; Package xserver-xorg-video-amdgpu.
(Wed, 29 Aug 2018 20:45:03 GMT) (full text, mbox, link).
Acknowledgement sent
to "Alan W. Irwin" <Alan.W.Irwin1234@gmail.com>:
Extra info received and forwarded to list. Copy sent to Debian X Strike Force <debian-x@lists.debian.org>.
(Wed, 29 Aug 2018 20:45:03 GMT) (full text, mbox, link).
Message #25 received at 900087@bugs.debian.org (full text, mbox, reply):
I avoided trying early kernel-4.17.x versions, but yesterday I updated from kernel-4.16.x to kernel 4.17.17-1, but frankly that change has not helped this lockup problem at all. For example, after trying direct use (with a KDE desktop if that makes any difference) for the first time with that kernel, the kernel only lasted a half an hour before I got a lockup which could only be solved by hitting the reset button! And roughly 8 hours later after that reset I got another lockup which also required a reset to regain control. So it appears the substantial number of AMD graphics fixes in kernel-4.17.x are not sufficient to stabilize use of this AMD RX 550 graphics card that should no longer be considered cutting-edge hardware (i.e. it was first offered for sale at least 16 months ago). Because of these on-going issues with direct use of this card, I am going back to using the X-terminal method with this kernel which experience with kernel-4.16.x shows is much more stable since it avoids using this graphics card completely (except for the direct display of the Linux console login prompt). I will try again to use this card directly when kernel-4.18.x is promoted to Buster. Alan __________________________ Alan W. Irwin Programming affiliations with the FreeEOS equation-of-state implementation for stellar interiors (freeeos.sf.net); the Time Ephemerides project (timeephem.sf.net); PLplot scientific plotting software package (plplot.sf.net); the libLASi project (unifont.org/lasi); the Loads of Linux Links project (loll.sf.net); and the Linux Brochure Project (lbproject.sf.net). __________________________ Linux-powered Science __________________________
Information forwarded
to debian-bugs-dist@lists.debian.org, Debian X Strike Force <debian-x@lists.debian.org>:
Bug#900087; Package xserver-xorg-video-amdgpu.
(Thu, 29 Aug 2019 09:33:03 GMT) (full text, mbox, link).
Acknowledgement sent
to Moritz Mühlenhoff <jmm@inutil.org>:
Extra info received and forwarded to list. Copy sent to Debian X Strike Force <debian-x@lists.debian.org>.
(Thu, 29 Aug 2019 09:33:03 GMT) (full text, mbox, link).
Message #30 received at 900087@bugs.debian.org (full text, mbox, reply):
On Sat, Jun 23, 2018 at 11:34:58AM -0700, Alan W. Irwin wrote:
> On 2018-06-02 10:07-0700 Alan W. Irwin wrote:
>
> > The propagation of kernel 4.16.12 from Sid to Buster has greatly
> > improved this situation, i.e., no lock ups so far (uptime approaching
> > 3 days since I switched to 4.16.12 from 4.16.5) and may have
> > completely solved it. [...]
>
> Well, further experience showed lockups occurred roughly as often for
> 4.16.12 as for 4.16.5. So currently I am only able to use this
> computer in a reliable way using an X-terminal (an alternate computer
> with a different X server that runs "X -query <name of this computer>"
> to control and display remote desktop results that are running on this
> computer).
>
> Therefore I plan to wait for kernel 4.17.x (which apparently has many
> graphics fixes for modern AMD cards such as the RX 550) to propagate
> to Buster before I try this computer again with a local X server,
> i.e., direct use rather than X-terminal use.
I'm seeing the same with RX 570 (which according to Wikipedia should
be the same architecture as your RX 550) and the stable Buster release,
both with the standard 4.19 kernel and the 5.2 kernel from buster-backports.
Cheers,
Moritz
Information forwarded
to debian-bugs-dist@lists.debian.org, Debian X Strike Force <debian-x@lists.debian.org>:
Bug#900087; Package xserver-xorg-video-amdgpu.
(Fri, 30 Aug 2019 19:27:06 GMT) (full text, mbox, link).
Acknowledgement sent
to "Alan W. Irwin" <Alan.W.Irwin1234@gmail.com>:
Extra info received and forwarded to list. Copy sent to Debian X Strike Force <debian-x@lists.debian.org>.
(Fri, 30 Aug 2019 19:27:06 GMT) (full text, mbox, link).
Message #35 received at 900087@bugs.debian.org (full text, mbox, reply):
On 2019-08-29 11:29+0200 Moritz Mühlenhoff wrote: > I'm seeing the same [instabilities] with RX 570 (which according to Wikipedia should > be the same architecture as your RX 550) and the stable Buster release, > both with the standard 4.19 kernel and the 5.2 kernel from buster-backports. The short story is after a BIOS upgrade my box has been stable for 27 days and counting. For the longer story read on.... I am now of the opinion that this whole mess is due to incompatibilities between real AMD Motherboard and graphics chip sets *as sold with initial BIOS* to unsuspecting Linux users in the last couple of years and the AMD documentation of those chip sets (which Linux kernel developers must rely on). So the net result of these initially buggy BIOS's is general Linux-AMD instability. (Do a google search for the terms (without quotes) "amd linux instability" and you will find many sorry tales.) Up to a month ago, I had solved virtually all the night-time almost completely idle lockups by using the kernel parameters idle=nomwait rcu_nocbs=0-15 (where the 15 corresponds to one less than the 16 hardware threads I have on my Ryzen 7 1700 system). But the rcu_nocbs parameter requires a special kernel build with a different configuration (CONFIG_RCU_NOCB_CPU=y) than what Debian supplies. With that custom kernel (4.18.10-custom) the idle lockups dropped to just one for a large number of months, but the active (as opposed to idle) instability issues still caused lockups with up times between them that ranged from 0.5 days to 24 days with an average up time of a week or so. Soon after I reported this box instability to kernel developers I got the advice from them to try a BIOS update. But I put that off for more than a year because such upgrades are considered to be a last resort. The reason for that is they can turn your motherboard into a brick with low but still non zero probability due to a number of different causes (such as AMD/Motherboard vendor screw ups with the BIOS upgrade, internet download errors with the BIOS, power outages during the BIOS upgrade, etc.) Also, there was huge churn in the BIOS upgrades with ASUS (my motherboard vendor) putting out 10 (!) of them since the BIOS I received when I bought the box. So I decided to wait until that churn had settled down, i.e., ASUS had gotten asymptotically closer to the definitive BIOS for my box. And meanwhile the above average up time of ~1 week was livable. The upshot was that 27 days ago I finally arranged for some professionals to do the BIOS upgrade. That made the AMD CBS Power Supply Idle Control option available for the first time, and I set that control from "auto" to "Typical Current Idle" (which apparently is an alternative to setting the custom kernel parameter rcu_nocbs=0-15 for dealing with idle instability issues). The net result of this update is the current up time (still with the same 4.18.10-custom kernel and kernel parameters) is 27 days and counting which is a new record. So I am beginning to hope that this BIOS upgrade has solved the active lockup issues not covered by rcu_nocbs=0-15, and might even (with Power Supply Idle Control set to "Typical Current Idle") solve the idle lockup issues if I drop rcu_nocbs=0-15. Therefore, if the current up time experiment with kernel 4.18.10 custom is able to continue for another month or so, my plan is to try a similar experiment with stock Debian kernel (i.e. without the custom kernel parameter rcu_nocbs=0-15), and if I get, say ~60 days up time with that kernel, I will likely conclude this problem has been completely solved, and I will close this bug report. Meanwhile, I hope if you decide as a last resort to try updating your own BIOS (after careful consideration of the known risks), that will completely solve this issue for you. Alan __________________________ Alan W. Irwin Programming affiliations with the FreeEOS equation-of-state implementation for stellar interiors (freeeos.sf.net); the Time Ephemerides project (timeephem.sf.net); PLplot scientific plotting software package (plplot.org); the libLASi project (unifont.org/lasi); the Loads of Linux Links project (loll.sf.net); and the Linux Brochure Project (lbproject.sf.net). __________________________ Linux-powered Science __________________________
Information forwarded
to debian-bugs-dist@lists.debian.org, Debian X Strike Force <debian-x@lists.debian.org>:
Bug#900087; Package xserver-xorg-video-amdgpu.
(Sun, 30 May 2021 09:42:02 GMT) (full text, mbox, link).
Acknowledgement sent
to "Simon Iremonger (debian)" <debian@iremonger.me.uk>:
Extra info received and forwarded to list. Copy sent to Debian X Strike Force <debian-x@lists.debian.org>.
(Sun, 30 May 2021 09:42:02 GMT) (full text, mbox, link).
Message #40 received at 900087@bugs.debian.org (full text, mbox, reply):
I would generally say this looks like problems more in kernel and firmware land, than bugs in the xserver driver to me... I would, generally note a lot of wider AMD instability/issues (that Alan) talks about improved a lot in 5.8-ubuntu and 5.10-debian (bullseye and buster-backports) kernels. Even 5.4-ubuntu kernels still have problem with some newer Ryzen systems. In short, I'd recommend testing debian buster-backports version of linux-image-amd64 linux-headers-amd64 and report back on this bug. In particular -- can this bug now be closed, anyhow? How could debian warn users to update BIOS/firmware? --Simon
Reply sent
to "Simon Iremonger (debian)" <debian@iremonger.me.uk>:
You have taken responsibility.
(Sat, 19 Jun 2021 17:30:03 GMT) (full text, mbox, link).
Notification sent
to "Alan W. Irwin" <Alan.W.Irwin1234@gmail.com>:
Bug acknowledged by developer.
(Sat, 19 Jun 2021 17:30:03 GMT) (full text, mbox, link).
Message #45 received at 900087-close@bugs.debian.org (full text, mbox, reply):
In short I think this bug can be closed, all Debian xorg and kernel packages have since been changed and the original report is ... outdated, in short. I very much suspect buster with backported kernel and bullseye will work better with amdgpu from much experience! The question of firmware-updating is a complex but important topic! --Simon
Bug archived.
Request was from Debbugs Internal Request <owner@bugs.debian.org>
to internal_control@bugs.debian.org.
(Sun, 18 Jul 2021 07:29:48 GMT) (full text, mbox, link).
Send a report that this bug log contains spam.
Debbugs is free software and licensed under the terms of the GNU Public License version 2. The current version can be obtained from https://bugs.debian.org/debbugs-source/.
Copyright © 1999 Darren O. Benham, 1997,2003 nCipher Corporation Ltd, 1994-97 Ian Jackson, 2005-2017 Don Armstrong, and many other contributors.