Debian Bug report logs - #788228
snmpd: Wrong label in ifDescr

Reply or subscribe to this bug.

Toggle useless messages

Message #5 received at submit@bugs.debian.org (full text, mbox, reply):

From: Michael Schwartzkopff <ms@sys4.de>

To: Debian Bug Tracking System <submit@bugs.debian.org>

Subject: snmpd: Wrong label in ifDescr

Date: Tue, 09 Jun 2015 17:22:11 +0200

Package: snmpd
Version: 5.7.2.1+dfsg-1
Severity: important

Hi,

in my system all infaces are labeled as "Intel Corporation 82540EM Gigabit Ethernet Controller" in the ifDescr entries if ifTable. It should be eth0, eth1, ff.

Greetings,

Michael Schwartzkopff.

-- System Information:
Debian Release: 8.0
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 3.16.0-4-amd64 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages snmpd depends on:
ii  adduser                3.113+nmu3
ii  debconf [debconf-2.0]  1.5.56
ii  libc6                  2.19-18
ii  libsnmp-base           5.7.2.1+dfsg-1
ii  libsnmp30              5.7.2.1+dfsg-1
ii  lsb-base               4.1+Debian13+nmu1

snmpd recommends no packages.

Versions of packages snmpd suggests:
pn  snmptrapd  <none>

-- Configuration Files:
/etc/default/snmpd changed:
export MIBS=
SNMPDRUN=yes
SNMPDOPTS='-Lsd -Lf /dev/null -u snmp -g adm -I -smux,mteTrigger,mteTriggerConf -p /run/snmpd.pid'

/etc/snmp/snmpd.conf changed:
agentAddress udp:161,udp6:[::1]:161
                                                 #  system + hrSystem groups only
view   systemonly  included   .1.3.6.1.2.1.1
view   systemonly  included   .1.3.6.1.2.1.25.1
                                                 #  Full access from the local host
                                                 #  Default access to basic system info
rocommunity public  default
                                                 #  rocommunity6 is for IPv6
rocommunity6 public  default
                                                 #  Full access from an example network
                                                 #     Adjust this network address to match your local
                                                 #     settings, change the community string,
                                                 #     and check the 'agentAddress' setting above
                                                 #  Full read-only access for SNMPv3
 rouser   authOnlyUser
                                                 #  Full write access for encrypted requests
                                                 #     Remember to activate the 'createUser' lines above
sysLocation    DE;Essen;Antonienallee 1;Hauptgeb.;1;2;4
sysContact     noc@linuxhotel.de (Tel: +49 211 12345) <noc@linuxhotel.de>
                                                 # Application + End-to-End layers
sysServices    72
                               # At least one  'mountd' process
                               # No more than 4 'ntalkd' processes - 0 is OK
                               # At least one 'sendmail' process, but no more than 10
proc	exim4
                               # 10MBs required on root disk, 5% free on /var, 10% free on all other disks
includeAllDisks  10%
load   12 10 5
                                    #   send SNMPv1  traps
 trapsink     localhost public
                                    #   send SNMPv2c traps
                                    #   send SNMPv2c INFORMs
                                   # Remember to activate the 'createUser' lines above
iquerySecName   internalUser       
rouser          internalUser
                                   # generate traps on UCD error conditions
defaultMonitors          yes
                                   # generate traps on linkUp/Down
linkUpDownNotifications  yes
 extend    test1   /bin/echo  Hello, world!
 extend-sh test2   echo Hello, world! ; echo Hi there ; exit 35
                                           #  Run as an AgentX master agent
 master          agentx
                                           #  Listen for network connections (from localhost)
                                           #    rather than the default named socket /var/agentx/master
logmatch marker /var/log/syslog 60 marker


-- debconf information:
  snmpd/upgradefrom521:

Send a report that this bug log contains spam.