Debian Bug report logs - #781087
libreoffice-impress: impress animation "strechy" dosn't work with drawings

Toggle useless messages

Message #5 received at submit@bugs.debian.org (full text, mbox, reply):

From: Wolfgang Hainz <whainz@hotmail.com>

To: Debian Bug Tracking System <submit@bugs.debian.org>

Subject: libreoffice-impress: impress animation "strechy" dosn't work with drawings

Date: Tue, 24 Mar 2015 12:11:52 +0100

[Message part 1 (text/plain, inline)]

Package: libreoffice-impress
Version: 1:4.3.3-2
Severity: normal

Dear Maintainer,

When I add a drawing element, e.g. a rectangle, to a slide and add the
animation effect "Stretchy" with the default setting "Direction: Across", the
element and all other elements later in the animation sequence are never shown.
The animation just stops finally after the corresponding number of
clicks/keypresses.
Strechty effect ainmations with other directions, e.g. "From bottom left",
don't show this problem, e.g. they work as expected and have no effect on
subsequent other animations.
The attached presentation with two drawing elements exhibits this behaviour but
works if I change the animation sequence of rectangle 1 and rectangle 2.



-- System Information:
Debian Release: 8.0
  APT prefers testing-updates
  APT policy: (500, 'testing-updates'), (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.16.0-4-amd64 (SMP w/1 CPU core)
Locale: LANG=de_DE.utf8, LC_CTYPE=de_DE.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages libreoffice-impress depends on:
ii  libc6                     2.19-15
ii  libetonyek-0.1-1          0.1.1-2
ii  libgcc1                   1:4.9.2-10
ii  libgl1-mesa-glx [libgl1]  10.3.2-1
ii  libglew1.10               1.10.0-3
ii  libglu1-mesa [libglu1]    9.0.0-2
ii  libodfgen-0.1-1           0.1.1-2
ii  libreoffice-core          1:4.3.3-2
ii  libreoffice-draw          1:4.3.3-2
ii  librevenge-0.0-0          0.0.1-3
ii  libstdc++6                4.9.2-10
ii  libxml2                   2.9.1+dfsg1-5
ii  uno-libs3                 4.3.3-2
ii  ure                       4.3.3-2
ii  zlib1g                    1:1.2.8.dfsg-2+b1

Versions of packages libreoffice-impress recommends:
ii  libreoffice-avmedia-backend-gstreamer  1:4.3.3-2

Versions of packages libreoffice-impress suggests:
ii  bluez  5.23-2+b1

Versions of packages libreoffice-core depends on:
ii  fontconfig                2.11.0-6.3
ii  fonts-opensymbol          2:102.6+LibO4.3.3-2
ii  libatk1.0-0               2.14.0-1
ii  libboost-date-time1.55.0  1.55.0+dfsg-3
ii  libc6                     2.19-15
ii  libcairo2                 1.14.0-2.1
ii  libclucene-contribs1      2.3.3.4-4
ii  libclucene-core1          2.3.3.4-4
ii  libcmis-0.4-4             0.4.1-7
ii  libcups2                  1.7.5-11
ii  libcurl3-gnutls           7.38.0-4
ii  libdbus-1-3               1.8.16-1
ii  libdbus-glib-1-2          0.102-1
ii  libeot0                   0.01-3
ii  libexpat1                 2.1.0-6+b3
ii  libexttextcat-2.0-0       3.4.4-1
ii  libfontconfig1            2.11.0-6.3
ii  libfreetype6              2.5.2-3
ii  libgcc1                   1:4.9.2-10
ii  libgdk-pixbuf2.0-0        2.31.1-2+b1
ii  libgl1-mesa-glx [libgl1]  10.3.2-1
ii  libglew1.10               1.10.0-3
ii  libglib2.0-0              2.42.1-1
ii  libgltf-0.0-0             0.0.2-2
ii  libglu1-mesa [libglu1]    9.0.0-2
ii  libgraphite2-3            1.2.4-3
ii  libgtk2.0-0               2.24.25-3
ii  libharfbuzz-icu0          0.9.35-2
ii  libharfbuzz0b             0.9.35-2
ii  libhunspell-1.3-0         1.3.3-3
ii  libhyphen0                2.8.8-1
ii  libice6                   2:1.0.9-1+b1
ii  libicu52                  52.1-8
ii  libjpeg62-turbo           1:1.3.1-12
ii  liblangtag1               0.5.1-3
ii  liblcms2-2                2.6-3+b3
ii  libldap-2.4-2             2.4.40-4
ii  libmythes-1.2-0           2:1.2.4-1
ii  libneon27-gnutls          0.30.1-1
ii  libnspr4                  2:4.10.7-1
ii  libnss3                   2:3.17.2-1.1
ii  libodfgen-0.1-1           0.1.1-2
ii  libpango-1.0-0            1.36.8-3
ii  libpangocairo-1.0-0       1.36.8-3
ii  libpangoft2-1.0-0         1.36.8-3
ii  libpng12-0                1.2.50-2+b2
ii  librdf0                   1.0.17-1+b1
ii  libreoffice-common        1:4.3.3-2
ii  librevenge-0.0-0          0.0.1-3
ii  libsm6                    2:1.2.2-1+b1
ii  libssl1.0.0               1.0.1k-1
ii  libstdc++6                4.9.2-10
ii  libx11-6                  2:1.6.2-3
ii  libxext6                  2:1.3.3-1
ii  libxinerama1              2:1.1.3-1+b1
ii  libxml2                   2.9.1+dfsg1-5
ii  libxrandr2                2:1.4.2-1+b1
ii  libxrender1               1:0.9.8-1+b1
ii  libxslt1.1                1.1.28-2+b2
ii  libxt6                    1:1.1.4-1+b1
ii  uno-libs3                 4.3.3-2
ii  ure                       4.3.3-2
ii  zlib1g                    1:1.2.8.dfsg-2+b1

Versions of packages libreoffice-draw depends on:
ii  libc6              2.19-15
ii  libcdr-0.1-1       0.1.0-3
ii  libdbus-1-3        1.8.16-1
ii  libdbus-glib-1-2   0.102-1
ii  libfreehand-0.1-1  0.1.0-2
ii  libgcc1            1:4.9.2-10
ii  libglib2.0-0       2.42.1-1
ii  libicu52           52.1-8
ii  liblcms2-2         2.6-3+b3
ii  libmspub-0.1-1     0.1.1-2
ii  libmwaw-0.3-3      0.3.1-2
ii  libodfgen-0.1-1    0.1.1-2
ii  libreoffice-core   1:4.3.3-2
ii  librevenge-0.0-0   0.0.1-3
ii  libstdc++6         4.9.2-10
ii  libvisio-0.1-1     0.1.0-2
ii  libwpd-0.10-10     0.10.0-2+b1
ii  libwpg-0.3-3       0.3.0-3
ii  libxml2            2.9.1+dfsg1-5
ii  uno-libs3          4.3.3-2
ii  ure                4.3.3-2
ii  zlib1g             1:1.2.8.dfsg-2+b1

-- no debconf information

[example.odp (application/vnd.oasis.opendocument.presentation, attachment)]

Message #10 received at 781087@bugs.debian.org (full text, mbox, reply):

From: gregor herrmann <gregoa@debian.org>

To: Wolfgang Hainz <whainz@hotmail.com>, 781087@bugs.debian.org

Subject: Re: Bug#781087: libreoffice-impress: impress animation "strechy" dosn't work with drawings

Date: Fri, 27 Mar 2015 15:18:23 +0100

[Message part 1 (text/plain, inline)]

Control: found -1 1:4.4.2~rc1-1

On Tue, 24 Mar 2015 12:11:52 +0100, Wolfgang Hainz wrote:

> Package: libreoffice-impress
> Version: 1:4.3.3-2
> Severity: normal
> 
> When I add a drawing element, e.g. a rectangle, to a slide and add the
> animation effect "Stretchy" with the default setting "Direction: Across", the
> element and all other elements later in the animation sequence are never shown.

I can confirm this problem with 1:4.3.3-2 on unstable.

I've now upgraded to LO 1:4.4.2~rc1-1 from experimental and tried
your example.odp. Unfortunately the behaviour is still the same.


Cheers,
gregor

-- 
 .''`.  Homepage: http://info.comodo.priv.at/ - OpenPGP key 0xBB3A68018649AA06
 : :' : Debian GNU/Linux user, admin, and developer -  https://www.debian.org/
 `. `'  Member of VIBE!AT & SPI, fellow of the Free Software Foundation Europe
   `-   NP: Dave Brubeck: Bossa Nova U.S.A.

[signature.asc (application/pgp-signature, inline)]

Message #17 received at 781087@bugs.debian.org (full text, mbox, reply):

From: gregor herrmann <gregoa@debian.org>

To: Wolfgang Hainz <whainz@hotmail.com>, 781087@bugs.debian.org

Subject: Re: Bug#781087: libreoffice-impress: impress animation "strechy" dosn't work with drawings

Date: Sun, 10 May 2015 14:11:44 +0200

[Message part 1 (text/plain, inline)]

Control: found -1 1:4.4.3-1

On Fri, 27 Mar 2015 15:18:23 +0100, gregor herrmann wrote:

> I can confirm this problem with 1:4.3.3-2 on unstable.
> 
> I've now upgraded to LO 1:4.4.2~rc1-1 from experimental and tried
> your example.odp. Unfortunately the behaviour is still the same.

Still reproducible for with the new 1:4.4.3-1 from unstable.


Cheers,
gregor

-- 
 .''`.  Homepage: http://info.comodo.priv.at/ - OpenPGP key 0xBB3A68018649AA06
 : :' : Debian GNU/Linux user, admin, and developer -  https://www.debian.org/
 `. `'  Member of VIBE!AT & SPI, fellow of the Free Software Foundation Europe
   `-   NP: Beatles

[signature.asc (application/pgp-signature, inline)]

Message #24 received at 781087@bugs.debian.org (full text, mbox, reply):

From: gregor herrmann <gregoa@debian.org>

To: Wolfgang Hainz <whainz@hotmail.com>, 781087@bugs.debian.org

Subject: Re: Bug#781087: libreoffice-impress: impress animation "strechy" dosn't work with drawings

Date: Sat, 30 May 2015 17:01:23 +0200

[Message part 1 (text/plain, inline)]

On Sun, 10 May 2015 14:11:44 +0200, gregor herrmann wrote:

> > I can confirm this problem with 1:4.3.3-2 on unstable.
> > I've now upgraded to LO 1:4.4.2~rc1-1 from experimental and tried
> > your example.odp. Unfortunately the behaviour is still the same.
> Still reproducible for with the new 1:4.4.3-1 from unstable.

Additional data point:
Both the original submitter and I can confirm, that the problem goes
away if we turn off hardware acceleration in
Tools→Options→LibreOffice→View.


Cheers,
gregor

-- 
 .''`.  Homepage: http://info.comodo.priv.at/ - OpenPGP key 0xBB3A68018649AA06
 : :' : Debian GNU/Linux user, admin, and developer -  https://www.debian.org/
 `. `'  Member of VIBE!AT & SPI, fellow of the Free Software Foundation Europe
   `-   NP: Bettina Wegner: Andre, die das Land so sehr nicht liebten

[signature.asc (application/pgp-signature, inline)]

Message #29 received at 781087@bugs.debian.org (full text, mbox, reply):

From: Stéphane Aulery <saulery@free.fr>

To: control@bugs.debian.org, Wolfgang Hainz <whainz@hotmail.com>, 781087@bugs.debian.org

Subject: Re: Bug #781087 - libreoffice-impress: impress animation "strechy" dosn't work with drawings

Date: Thu, 3 Mar 2016 12:02:11 +0100 (CET)

forwarded 781087 https://bugs.documentfoundation.org/show_bug.cgi?id=63443
tags 781087 + upstream
tags 781087 + moreinfo
stop
-----

Hello Wolfgang,

I think yours bug is similar to this other bug :

    https://bugs.documentfoundation.org/show_bug.cgi?id=63443

Can you send me the output of "lsusb" and "lspci" commands please?

If you can test with a newer version of LO (from backports maybe), it's fine.

Regards,

-- 
Stéphane Aulery

Message #40 received at 781087@bugs.debian.org (full text, mbox, reply):

From: Wolfgang Hainz <whainz@hotmail.com>

To: Stéphane Aulery <saulery@free.fr>, 781087@bugs.debian.org

Subject: Re: Bug #781087 - libreoffice-impress: impress animation "strechy" dosn't work with drawings

Date: Sat, 5 Mar 2016 15:33:59 +0100

Hi Stéphane,

thanks for looking into this issue. Please find below the output of lsusb and lspci. Actually I'm using LO Version 5.0.5.2 from Debian Stable backports.

~$lsusb
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 04f2:b217 Chicony Electronics Co., Ltd Lenovo Integrated Camera (0.3MP)
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

~$lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:16.3 Serial controller: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4)
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b4)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 [Taylor Peak] (rev 34)
0d:00.0 System peripheral: Ricoh Co Ltd PCIe SDXC/MMC Host Controller (rev 07)

Kind regards, Wolfgang

Message #45 received at 781087@bugs.debian.org (full text, mbox, reply):

From: Stéphane Aulery <saulery@free.fr>

To: Wolfgang Hainz <whainz@hotmail.com>, 781087@bugs.debian.org

Subject: Re: Bug #781087 - libreoffice-impress: impress animation "strechy" dosn't work with drawings

Date: Sat, 5 Mar 2016 19:15:36 +0100

Hi Wolfgang,

Le 05/03/2016 15:33, Wolfgang Hainz a écrit :
>
> thanks for looking into this issue. Please find below the output of lsusb and lspci. Actually I'm using LO Version 5.0.5.2 from Debian Stable backports.

Thanks for tho output.

Did you have the same bug with 5.0.5.2 ?

Regards,

-- 
Stéphane Aulery

Message #50 received at 781087@bugs.debian.org (full text, mbox, reply):

From: Wolfgang Hainz <whainz@hotmail.com>

To: saulery@free.fr, 781087@bugs.debian.org

Subject: Re: Bug #781087 - libreoffice-impress: impress animation "strechy" dosn't work with drawings

Date: Sat, 5 Mar 2016 23:51:36 +0100

Hi Stéphane,

yes, I'm still seeing this bug with 5.0.5.2.

Regards,

Wolfgang

Message #55 received at 781087@bugs.debian.org (full text, mbox, reply):

From: Stéphane Aulery <saulery@free.fr>

To: Wolfgang Hainz <whainz@hotmail.com>, 781087@bugs.debian.org

Subject: Re: Bug #781087 - libreoffice-impress: impress animation "strechy" dosn't work with drawings

Date: Sun, 6 Mar 2016 01:15:49 +0100

Hi Wolfgang,

Le 05/03/2016 23:51, Wolfgang Hainz a écrit :
>
> yes, I'm still seeing this bug with 5.0.5.2.

Everything matches. I forward the information. Thank you. :))

Regards,

-- 
Stéphane Aulery

Message #62 received at 781087-done@bugs.debian.org (full text, mbox, reply):

From: saulery@legtux.org

To: 781087-done@bugs.debian.org

Subject: libreoffice-impress: impress animation "strechy" dosn't work with drawings

Date: Mon, 13 May 2019 13:42:04 +0000

Hello,

please follow this bug at :

https://bugs.documentfoundation.org/show_bug.cgi?id=63443

Regards,

-- 
Stéphane Aulery

Message #71 received at 781087@bugs.debian.org (full text, mbox, reply):

From: Terri Holden <holden-t@bk.ru>

To: holden-t@bk.ru

Subject: Li

Date: Tue, 08 Oct 2019 14:58:49 +0300

[Message part 1 (text/plain, inline)]

Liebste
Ich bin Terri Holden. Bitte sprechen Sie Englisch, ich habe etwas mit Ihnen zu besprechen, wenn Sie nichts dagegen haben.

[Message part 2 (text/html, inline)]

Message #76 received at 781087@bugs.debian.org (full text, mbox, reply):

From: Stéphane Aulery <lkppo@free.fr>

To: 781087@bugs.debian.org

Subject: libreoffice-impress: impress animation "strechy" dosn't work with drawings

Date: Tue, 20 Dec 2022 02:22:06 +0100

Hi Wolfgang,

Did you still have the same bug with 7.0.4 (bullseye) or 7.4.3 (bookworm) ?

Regards,

-- 
Stéphane Aulery

Message #81 received at 781087@bugs.debian.org (full text, mbox, reply):

From: gregor herrmann <gregoa@debian.org>

To: saulery@legtux.org, 781087@bugs.debian.org

Cc: Wolfgang Hainz <whainz@hotmail.com>

Subject: Re: Bug#781087: libreoffice-impress: impress animation "strechy" dosn't work with drawings

Date: Tue, 20 Dec 2022 19:05:37 +0100

[Message part 1 (text/plain, inline)]

On Tue, 20 Dec 2022 02:22:06 +0100, Stéphane Aulery wrote:

> Hi Wolfgang,
> 
> Did you still have the same bug with 7.0.4 (bullseye) or 7.4.3 (bookworm) ?
> 
> Regards,


cc'ing the submitter explitly :)


Cheers,
gregor 

-- 
 .''`.  https://info.comodo.priv.at -- Debian Developer https://www.debian.org
 : :' : OpenPGP fingerprint D1E1 316E 93A7 60A8 104D  85FA BB3A 6801 8649 AA06
 `. `'  Member VIBE!AT & SPI Inc. -- Supporter Free Software Foundation Europe
   `-   

[signature.asc (application/pgp-signature, inline)]

Message #86 received at 781087@bugs.debian.org (full text, mbox, reply):

From: gregor herrmann <gregoa@debian.org>

To: 781087@bugs.debian.org

Cc: saulery@legtux.org, Wolfgang Hainz <whainz@hotmail.com>

Subject: Re: Bug#781087: libreoffice-impress: impress animation "strechy" dosn't work with drawings

Date: Tue, 20 Dec 2022 21:02:01 +0100

[Message part 1 (text/plain, inline)]

On Tue, 20 Dec 2022 19:05:37 +0100, gregor herrmann wrote:

> > Hi Wolfgang,
> > Did you still have the same bug with 7.0.4 (bullseye) or 7.4.3 (bookworm) ?
> 
> cc'ing the submitter explitly :)

Wolfgang just confirmed to me in a private conversation that both
bullseye and bookworm are still affected by this bug.


Cheers,
gregor

-- 
 .''`.  https://info.comodo.priv.at -- Debian Developer https://www.debian.org
 : :' : OpenPGP fingerprint D1E1 316E 93A7 60A8 104D  85FA BB3A 6801 8649 AA06
 `. `'  Member VIBE!AT & SPI Inc. -- Supporter Free Software Foundation Europe
   `-   

[signature.asc (application/pgp-signature, inline)]

Message #97 received at 781087@bugs.debian.org (full text, mbox, reply):

From: gregor herrmann <gregoa@debian.org>

To: 781087@bugs.debian.org

Cc: saulery@legtux.org, Wolfgang Hainz <whainz@hotmail.com>

Subject: Re: Bug#781087: libreoffice-impress: impress animation "strechy" dosn't work with drawings

Date: Fri, 30 Dec 2022 15:17:40 +0100

[Message part 1 (text/plain, inline)]

Control: notfound -1 1:7.4.3-2

On Tue, 20 Dec 2022 21:02:01 +0100, gregor herrmann wrote:

> Wolfgang just confirmed to me in a private conversation that both
> bullseye and bookworm are still affected by this bug.

Wolfgang informed me that he had the chance to try again during the
holiday season, and that the bug is not present anymore in the
testing version. I'm adjusting the bug metadata accordingly.

(Probably the bug can be closed but I'm not sure what the best
version would be.)


Cheers,
gregor

-- 
 .''`.  https://info.comodo.priv.at -- Debian Developer https://www.debian.org
 : :' : OpenPGP fingerprint D1E1 316E 93A7 60A8 104D  85FA BB3A 6801 8649 AA06
 `. `'  Member VIBE!AT & SPI Inc. -- Supporter Free Software Foundation Europe
   `-   

[signature.asc (application/pgp-signature, inline)]

Message #104 received at 781087-done@bugs.debian.org (full text, mbox, reply):

From: Rene Engelhard <rene@debian.org>

To: gregor herrmann <gregoa@debian.org>, 781087-done@bugs.debian.org

Cc: saulery@legtux.org, Wolfgang Hainz <whainz@hotmail.com>

Subject: Re: Bug#781087: libreoffice-impress: impress animation "strechy" dosn't work with drawings

Date: Fri, 30 Dec 2022 15:26:48 +0100

Version: 1:7.4.3-1


Hi,

Am 30.12.22 um 15:17 schrieb gregor herrmann:
> Control: notfound -1 1:7.4.3-2
>
> On Tue, 20 Dec 2022 21:02:01 +0100, gregor herrmann wrote:
>
>> Wolfgang just confirmed to me in a private conversation that both
>> bullseye and bookworm are still affected by this bug.
> Wolfgang informed me that he had the chance to try again during the
> holiday season, and that the bug is not present anymore in the
> testing version. I'm adjusting the bug metadata accordingly.
>
> (Probably the bug can be closed but I'm not sure what the best
> version would be.)

As long as it's fixed I don't necessarily care. So closing with 
1:7.4.3-1 (as -2 was just disabling the tests on s390x and

1:7.4.3-1 is the branch point for the 7.5.0 packages in NEW.


If someone found out on which version this exactly was fixed, it would 
be better, but no big deal.

Important thing is that it's fixed :-)


Regards,


Rene

Send a report that this bug log contains spam.