Package: xserver-xorg-video-nouveau; Maintainer for xserver-xorg-video-nouveau is Debian X Strike Force <debian-x@lists.debian.org>; Source for xserver-xorg-video-nouveau is src:xserver-xorg-video-nouveau (PTS, buildd, popcon).
Reported by: David Westberg <david@uarda.dlinkddns.com>
Date: Fri, 29 Apr 2011 15:09:01 UTC
Severity: normal
Found in version xserver-xorg-video-nouveau/1:0.0.15+git20100329+7858345-5
Reply or subscribe to this bug.
View this report as an mbox folder, status mbox, maintainer mbox
Report forwarded
to debian-bugs-dist@lists.debian.org, Debian X Strike Force <debian-x@lists.debian.org>:
Bug#624553; Package xserver-xorg-video-nouveau.
(Fri, 29 Apr 2011 15:09:04 GMT) (full text, mbox, link).
Acknowledgement sent
to David Westberg <david@uarda.dlinkddns.com>:
New Bug report received and forwarded. Copy sent to Debian X Strike Force <debian-x@lists.debian.org>.
(Fri, 29 Apr 2011 15:09:04 GMT) (full text, mbox, link).
Message #5 received at submit@bugs.debian.org (full text, mbox, reply):
[Message part 1 (text/plain, inline)]
Package: xserver-xorg-video-nouveau
Version: 1:0.0.15+git20100329+7858345-5
Severity: normal
EDID is not retrived using the nouveau driver. Thus driver does not use the
monitor at default resolution, 1280x1024.
The monitor connected is a Samsung SyncMaster 770TFT.
The output from get-edid command is:
------------------------------------------------
VBE/DDC service about to be called
Read EDID
Performing real mode VBE call
Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0
Function supported
Call failed
The EDID data should not be trusted as the VBE call failed
Error: output block unchanged
----------------------------------------------
Complete output from the command can be found in nvXX-get-edid attachment.
nvidia xorg.log is attached.
nvida get-edid output is attached.
Using the following steps as a workaround it is possible to create a monitor
configuration file.
Using the nivida driver it is possible to retrive the EDID information and
create a monitor section suitable for use with xorg.conf directory.
Note, Id must correspond to default monitor id printed by the xorg server.
Last step is to remove the proprietary nvidia driver and reinstall the nouveau
driver.
Now the driver can use the 1280x1024 resolution.
/David
-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 Nov 28 14:56 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1733468 Feb 19 15:43 /usr/bin/Xorg
VGA-compatible devices on PCI bus:
----------------------------------
02:00.0 VGA compatible controller [0300]: nVidia Corporation NVCrush11
[GeForce2 MX Integrated Graphics] [10de:01a0] (rev b1)
/etc/X11/xorg.conf does not exist.
/etc/X11/xorg.conf.d does not exist.
KMS configuration files:
------------------------
/etc/modprobe.d/i915-kms.conf:
options i915 modeset=1
/etc/modprobe.d/radeon-kms.conf:
options radeon modeset=1
Kernel version (/proc/version):
-------------------------------
Linux version 2.6.32-5-686 (Debian 2.6.32-33) (dannf@debian.org) (gcc version
4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Apr 4 21:59:07 UTC 2011
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 25126 Apr 4 21:07 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 24720 Apr 29 15:15 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.29-dsa-ia32 i686 Debian
Current Operating System: Linux debian2 2.6.32-5-686 #1 SMP Mon Apr 4 21:59:07
UTC 2011 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686
root=UUID=1a90fc38-977e-4552-b050-5cb5cd0c9a7a ro quiet
Build Date: 19 February 2011 02:37:36PM
xorg-server 2:1.7.7-13 (Cyril Brulebois <kibi@debian.org>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Apr 29 15:15:27 2011
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable
AutoAddDevices.
(II) Loader magic: 0x81ecca0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:2:0:0) 10de:01a0:1462:3678 nVidia Corporation NVCrush11 [GeForce2
MX Integrated Graphics] rev 177, Mem @ 0xec000000/16777216,
0xe0000000/134217728, BIOS @ 0x????????/65536
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched nouveau as autoconfigured driver 0
(==) Matched nv as autoconfigured driver 1
(==) Matched vesa as autoconfigured driver 2
(==) Matched fbdev as autoconfigured driver 3
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "nouveau"
(II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
(II) Module nouveau: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 0.0.15
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "nv"
(II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so
(II) Module nv: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.1.17
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 0.4.2
ABI class: X.Org Video Driver, version 6.0
(II) NOUVEAU driver Date: Tue Mar 16 13:08:37 2010 +1000
(II) NOUVEAU driver for NVIDIA chipset families :
RIVA TNT (NV04)
RIVA TNT2 (NV05)
GeForce 256 (NV10)
GeForce 2 (NV11, NV15)
GeForce 4MX (NV17, NV18)
GeForce 3 (NV20)
GeForce 4Ti (NV25, NV28)
GeForce FX (NV3x)
GeForce 6 (NV4x)
GeForce 7 (G7x)
GeForce 8 (G8x)
(II) NOUVEAU driver Date: Tue Mar 16 13:08:37 2010 +1000
(II) NOUVEAU driver for NVIDIA chipset families :
RIVA TNT (NV04)
RIVA TNT2 (NV05)
GeForce 256 (NV10)
GeForce 2 (NV11, NV15)
GeForce 4MX (NV17, NV18)
GeForce 3 (NV20)
GeForce 4Ti (NV25, NV28)
GeForce FX (NV3x)
GeForce 6 (NV4x)
GeForce 7 (G7x)
GeForce 8 (G8x)
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 02@00:00:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: Searching for BusID pci:0000:02:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:02:00.0
(II) [drm] nouveau interface version: 0.0.15
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 0.0.2
ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/lib/xorg/modules/extensions/libdri.so
(II) NOUVEAU(0): Loaded DRI module
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:02:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:02:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(--) NOUVEAU(0): Chipset: "NVIDIA NV1a"
(II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
(==) NOUVEAU(0): RGB weight 888
(==) NOUVEAU(0): Default visual is TrueColor
(==) NOUVEAU(0): Using HW cursor
(II) NOUVEAU(0): Output VGA-1 using monitor section <default monitor>
(II) NOUVEAU(0): Output DVI-D-1 has no monitor section
(II) NOUVEAU(0): EDID for output VGA-1
(II) NOUVEAU(0): Not using default mode "640x350" (unknown reason)
(II) NOUVEAU(0): Not using default mode "320x175" (unknown reason)
(II) NOUVEAU(0): Not using default mode "640x400" (unknown reason)
(II) NOUVEAU(0): Not using default mode "320x200" (unknown reason)
(II) NOUVEAU(0): Not using default mode "720x400" (unknown reason)
(II) NOUVEAU(0): Not using default mode "360x200" (unknown reason)
(II) NOUVEAU(0): Not using default mode "640x480" (unknown reason)
(II) NOUVEAU(0): Not using default mode "320x240" (unknown reason)
(II) NOUVEAU(0): Not using default mode "640x480" (unknown reason)
(II) NOUVEAU(0): Not using default mode "320x240" (unknown reason)
(II) NOUVEAU(0): Not using default mode "640x480" (unknown reason)
(II) NOUVEAU(0): Not using default mode "320x240" (unknown reason)
(II) NOUVEAU(0): Not using default mode "640x480" (unknown reason)
(II) NOUVEAU(0): Not using default mode "320x240" (unknown reason)
(II) NOUVEAU(0): Not using default mode "800x600" (unknown reason)
(II) NOUVEAU(0): Not using default mode "400x300" (unknown reason)
(II) NOUVEAU(0): Not using default mode "800x600" (unknown reason)
(II) NOUVEAU(0): Not using default mode "400x300" (unknown reason)
(II) NOUVEAU(0): Not using default mode "800x600" (unknown reason)
(II) NOUVEAU(0): Not using default mode "400x300" (unknown reason)
(II) NOUVEAU(0): Not using default mode "800x600" (unknown reason)
(II) NOUVEAU(0): Not using default mode "400x300" (unknown reason)
(II) NOUVEAU(0): Not using default mode "800x600" (unknown reason)
(II) NOUVEAU(0): Not using default mode "400x300" (unknown reason)
(II) NOUVEAU(0): Not using default mode "1024x768" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "512x384" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "1024x768" (unknown reason)
(II) NOUVEAU(0): Not using default mode "512x384" (unknown reason)
(II) NOUVEAU(0): Not using default mode "1024x768" (unknown reason)
(II) NOUVEAU(0): Not using default mode "512x384" (unknown reason)
(II) NOUVEAU(0): Not using default mode "1024x768" (unknown reason)
(II) NOUVEAU(0): Not using default mode "512x384" (unknown reason)
(II) NOUVEAU(0): Not using default mode "1024x768" (unknown reason)
(II) NOUVEAU(0): Not using default mode "512x384" (unknown reason)
(II) NOUVEAU(0): Not using default mode "1152x864" (unknown reason)
(II) NOUVEAU(0): Not using default mode "576x432" (unknown reason)
(II) NOUVEAU(0): Not using default mode "1280x960" (unknown reason)
(II) NOUVEAU(0): Not using default mode "640x480" (unknown reason)
(II) NOUVEAU(0): Not using default mode "1280x960" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "640x480" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "1280x1024" (unknown reason)
(II) NOUVEAU(0): Not using default mode "640x512" (unknown reason)
(II) NOUVEAU(0): Not using default mode "1280x1024" (unknown reason)
(II) NOUVEAU(0): Not using default mode "640x512" (unknown reason)
(II) NOUVEAU(0): Not using default mode "1280x1024" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "640x512" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "1600x1200" (unknown reason)
(II) NOUVEAU(0): Not using default mode "800x600" (unknown reason)
(II) NOUVEAU(0): Not using default mode "1600x1200" (unknown reason)
(II) NOUVEAU(0): Not using default mode "800x600" (unknown reason)
(II) NOUVEAU(0): Not using default mode "1600x1200" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "800x600" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "1600x1200" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "800x600" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "1600x1200" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "800x600" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "1792x1344" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "896x672" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "1792x1344" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "896x672" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "1856x1392" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "928x696" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "1856x1392" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "928x696" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "1920x1440" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "960x720" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "1920x1440" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "960x720" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "832x624" (unknown reason)
(II) NOUVEAU(0): Not using default mode "416x312" (unknown reason)
(II) NOUVEAU(0): Not using default mode "1152x864" (unknown reason)
(II) NOUVEAU(0): Not using default mode "576x432" (unknown reason)
(II) NOUVEAU(0): Not using default mode "1152x864" (unknown reason)
(II) NOUVEAU(0): Not using default mode "576x432" (unknown reason)
(II) NOUVEAU(0): Not using default mode "1152x864" (unknown reason)
(II) NOUVEAU(0): Not using default mode "576x432" (unknown reason)
(II) NOUVEAU(0): Not using default mode "1152x864" (unknown reason)
(II) NOUVEAU(0): Not using default mode "576x432" (unknown reason)
(II) NOUVEAU(0): Not using default mode "1152x864" (unknown reason)
(II) NOUVEAU(0): Not using default mode "576x432" (unknown reason)
(II) NOUVEAU(0): Not using default mode "1152x864" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "576x432" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "1360x768" (monitor doesn't support
reduced blanking)
(II) NOUVEAU(0): Not using default mode "680x384" (unknown reason)
(II) NOUVEAU(0): Not using default mode "1360x768" (unknown reason)
(II) NOUVEAU(0): Not using default mode "680x384" (unknown reason)
(II) NOUVEAU(0): Not using default mode "1400x1050" (unknown reason)
(II) NOUVEAU(0): Not using default mode "700x525" (unknown reason)
(II) NOUVEAU(0): Not using default mode "1400x1050" (unknown reason)
(II) NOUVEAU(0): Not using default mode "700x525" (unknown reason)
(II) NOUVEAU(0): Not using default mode "1400x1050" (unknown reason)
(II) NOUVEAU(0): Not using default mode "700x525" (unknown reason)
(II) NOUVEAU(0): Not using default mode "1400x1050" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "700x525" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "1440x900" (unknown reason)
(II) NOUVEAU(0): Not using default mode "720x450" (unknown reason)
(II) NOUVEAU(0): Not using default mode "1600x1024" (unknown reason)
(II) NOUVEAU(0): Not using default mode "800x512" (unknown reason)
(II) NOUVEAU(0): Not using default mode "1680x1050" (monitor doesn't support
reduced blanking)
(II) NOUVEAU(0): Not using default mode "840x525" (unknown reason)
(II) NOUVEAU(0): Not using default mode "1680x1050" (unknown reason)
(II) NOUVEAU(0): Not using default mode "840x525" (unknown reason)
(II) NOUVEAU(0): Not using default mode "1680x1050" (unknown reason)
(II) NOUVEAU(0): Not using default mode "840x525" (unknown reason)
(II) NOUVEAU(0): Not using default mode "1680x1050" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "840x525" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "1680x1050" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "840x525" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "1920x1080" (monitor doesn't support
reduced blanking)
(II) NOUVEAU(0): Not using default mode "960x540" (unknown reason)
(II) NOUVEAU(0): Not using default mode "1920x1200" (monitor doesn't support
reduced blanking)
(II) NOUVEAU(0): Not using default mode "960x600" (unknown reason)
(II) NOUVEAU(0): Not using default mode "1920x1440" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "960x720" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "2048x1536" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "1024x768" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "2048x1536" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "1024x768" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "2048x1536" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "1024x768" (hsync out of range)
(II) NOUVEAU(0): Printing probed modes for output VGA-1
(II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024
1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771
777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605
628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603
625 +hsync +vsync (35.2 kHz)
(II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494
517 +hsync +vsync (31.0 kHz)
(II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492
525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): EDID for output DVI-D-1
(II) NOUVEAU(0): Output VGA-1 connected
(II) NOUVEAU(0): Output DVI-D-1 disconnected
(II) NOUVEAU(0): Using fuzzy aspect match for initial modes
(II) NOUVEAU(0): Output VGA-1 using initial mode 1024x768
(II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise
stated.
(--) NOUVEAU(0): Virtual size is 1024x768 (pitch 1024)
(**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4
kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771
777 806 -hsync -vsync (48.4 kHz)
(**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9
kHz, 60.3 Hz
(II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605
628 +hsync +vsync (37.9 kHz)
(**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2
kHz, 56.2 Hz
(II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603
625 +hsync +vsync (35.2 kHz)
(**) NOUVEAU(0): Driver mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0
kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494
517 +hsync +vsync (31.0 kHz)
(**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5
kHz, 59.9 Hz
(II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492
525 -hsync -vsync (31.5 kHz)
(**) NOUVEAU(0): Mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz,
60.0 Hz
(II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024
1025 1028 1066 +hsync +vsync (64.0 kHz)
(==) NOUVEAU(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules/libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.5.0
ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib/xorg/modules/libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) UnloadModule: "nv"
(II) Unloading /usr/lib/xorg/modules/drivers/nv_drv.so
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so
(--) Depth 24 pixmap format is 32 bpp
(II) NOUVEAU(0): Opened GPU channel 1
(II) NOUVEAU(0): [DRI2] Setup complete
(II) NOUVEAU(0): GART: 64MiB available
(II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer
(II) EXA(0): Driver allocated offscreen pixmaps
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(II) UploadToScreen
(II) DownloadFromScreen
(==) NOUVEAU(0): Backing store disabled
(==) NOUVEAU(0): Silken mouse enabled
(II) NOUVEAU(0): NVEnterVT is called.
(==) NOUVEAU(0): DPMS enabled
(II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled
message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(EE) AIGLX error: dlopen of /usr/lib/dri/nouveau_vieux_dri.so failed
(/usr/lib/dri/nouveau_vieux_dri.so: cannot open shared object file: No such
file or directory)
(EE) AIGLX: reverting to software rendering
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) NOUVEAU(0): Setting screen physical size to 270 x 203
resize called 1024 768
(II) config/udev: Adding input device Power Button (/dev/input/event2)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "se"
(**) Option "xkb_variant" "basic"
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "se"
(**) Option "xkb_variant" "basic"
(II) config/udev: Adding input device AT Translated Set 2 keyboard
(/dev/input/event0)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard
catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type:
KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "se"
(**) Option "xkb_variant" "basic"
(II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse
(/dev/input/event4)
(**) ImPS/2 Logitech Wheel Mouse: Applying InputClass "evdev pointer catchall"
(**) ImPS/2 Logitech Wheel Mouse: always reports core events
(**) ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event4"
(II) ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
(II) ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
(II) ImPS/2 Logitech Wheel Mouse: Found relative axes
(II) ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
(II) ImPS/2 Logitech Wheel Mouse: Configuring as mouse
(**) ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
(**) ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia:
10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type:
MOUSE)
(II) ImPS/2 Logitech Wheel Mouse: initialized for relative axes.
(II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse
(/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device PC Speaker (/dev/input/event3)
(II) No input driver/identifier specified (ignoring)
resize called 1280 1024
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2
N: input/event2
S: char/13:66
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2
E: MAJOR=13
E: MINOR=66
E: DEVNAME=/dev/input/event2
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=se
E: XKBVARIANT=basic
E: DEVLINKS=/dev/char/13:66
E: DMI_VENDOR=HP Pavilion 05
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1
N: input/event1
S: char/13:65
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1
E: MAJOR=13
E: MINOR=65
E: DEVNAME=/dev/input/event1
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=se
E: XKBVARIANT=basic
E: DEVLINKS=/dev/char/13:65
E: DMI_VENDOR=HP Pavilion 05
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: char/13:64
S: input/by-path/platform-i8042-serio-0-event-kbd
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: MAJOR=13
E: MINOR=64
E: DEVNAME=/dev/input/event0
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-0
E: XKBMODEL=pc105
E: XKBLAYOUT=se
E: XKBVARIANT=basic
E: DEVLINKS=/dev/char/13:64 /dev/input/by-path/platform-i8042-serio-0-event-kbd
E: DMI_VENDOR=HP Pavilion 05
P: /devices/platform/i8042/serio1/input/input4/event4
N: input/event4
S: char/13:68
S: input/by-path/platform-i8042-serio-1-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio1/input/input4/event4
E: MAJOR=13
E: MINOR=68
E: DEVNAME=/dev/input/event4
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-1
E: DMI_VENDOR=HP Pavilion 05
E: DEVLINKS=/dev/char/13:68 /dev/input/by-path/platform-i8042-serio-1-event-
mouse
P: /devices/platform/i8042/serio1/input/input4/mouse0
N: input/mouse0
S: char/13:32
S: input/by-path/platform-i8042-serio-1-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio1/input/input4/mouse0
E: MAJOR=13
E: MINOR=32
E: DEVNAME=/dev/input/mouse0
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-1
E: DEVLINKS=/dev/char/13:32 /dev/input/by-path/platform-i8042-serio-1-mouse
P: /devices/platform/pcspkr/input/input3/event3
N: input/event3
S: char/13:67
S: input/by-path/platform-pcspkr-event-spkr
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/pcspkr/input/input3/event3
E: MAJOR=13
E: MINOR=67
E: DEVNAME=/dev/input/event3
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-pcspkr
E: DMI_VENDOR=HP Pavilion 05
E: DEVLINKS=/dev/char/13:67 /dev/input/by-path/platform-pcspkr-event-spkr
DRM Information from dmesg:
---------------------------
[ 0.127747] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[ 0.966520] Linux agpgart interface v0.103
[ 0.966695] agpgart: Detected NVIDIA nForce chipset
[ 0.973495] agpgart-nvidia 0000:00:00.0: AGP aperture is 64M @ 0xe8000000
[ 17.987824] [drm] Initialized drm 1.1.0 20060810
[ 18.257796] [drm] nouveau 0000:02:00.0: failed to evaluate _DSM: 5
[ 18.263424] [drm] nouveau 0000:02:00.0: Detected an NV10 generation card
(0x01a000b1)
[ 18.263587] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from
PROM
[ 18.263597] [drm] nouveau 0000:02:00.0: ... BIOS signature not found
[ 18.263601] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from
PRAMIN
[ 18.319310] [drm] nouveau 0000:02:00.0: ... BIOS checksum invalid
[ 18.319314] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from
PCIROM
[ 18.320571] [drm] nouveau 0000:02:00.0: ... appears to be valid
[ 18.320818] [drm] nouveau 0000:02:00.0: BMP BIOS found
[ 18.320822] [drm] nouveau 0000:02:00.0: BMP version 5.20
[ 18.320827] [drm] nouveau 0000:02:00.0: Bios version 03.1a.01.03
[ 18.320833] [drm] nouveau 0000:02:00.0: Found Display Configuration Block
version 1.4
[ 18.320838] [drm] nouveau 0000:02:00.0: No useful information in BIOS output
table; adding all possible outputs
[ 18.320844] [drm] nouveau 0000:02:00.0: Probing TV encoders on I2C bus: 1
[ 18.334782] [drm] nouveau 0000:02:00.0: No TV encoders found.
[ 18.335123] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset
0xA850
[ 18.335131] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset
0xADC5
[ 18.335139] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset
0xA851
[ 18.335146] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset
0xADC4
[ 18.335150] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset
0xA875
[ 18.335155] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 5 at offset
0xA931
[ 18.335176] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 6 at offset
0xA876
[ 18.335199] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 7 at offset
0xA8CC
[ 18.351814] [drm] nouveau 0000:02:00.0: 32 MiB VRAM
[ 18.351950] agpgart-nvidia 0000:00:00.0: AGP 2.0 bridge
[ 18.351975] agpgart-nvidia 0000:00:00.0: putting AGP V2 device into 4x mode
[ 18.352425] nouveau 0000:02:00.0: putting AGP V2 device into 4x mode
[ 18.352433] [drm] nouveau 0000:02:00.0: 64 MiB GART (aperture)
[ 18.352862] [drm] nouveau 0000:02:00.0: Allocating FIFO number 0
[ 18.354727] [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised
FIFO 0
[ 18.354945] [drm] nouveau 0000:02:00.0: Saving VGA fonts
[ 18.414884] [drm] nouveau 0000:02:00.0: Detected a VGA connector
[ 18.417398] [drm] nouveau 0000:02:00.0: Detected a DVI-D connector
[ 18.418949] [drm] nouveau 0000:02:00.0: Setting dpms mode 3 on vga encoder
(output 0)
[ 18.418958] [drm] nouveau 0000:02:00.0: Setting dpms mode 3 on tmds encoder
(output 1)
[ 18.548895] [drm] nouveau 0000:02:00.0: Load detected on head A
[ 18.558403] [drm] nouveau 0000:02:00.0: allocated 1024x768 fb: 0x45000, bo
edb85200
[ 18.563493] [drm] Initialized nouveau 0.0.15 20090420 for 0000:02:00.0 on
minor 0
[ 18.720762] [drm] nouveau 0000:02:00.0: Load detected on head A
[ 18.848874] [drm] nouveau 0000:02:00.0: Load detected on head A
[ 19.081962] [drm] nouveau 0000:02:00.0: Allocating FIFO number 1
[ 19.083922] [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised
FIFO 1
[ 19.615382] [drm] nouveau 0000:02:00.0: Setting dpms mode 0 on vga encoder
(output 0)
[ 19.615393] [drm] nouveau 0000:02:00.0: Output VGA-1 is running on CRTC 0
using output @
[ 25.755925] [drm] nouveau 0000:02:00.0: Load detected on head A
[ 25.904146] [drm] nouveau 0000:02:00.0: Load detected on head A
[ 26.163315] [drm] nouveau 0000:02:00.0: Load detected on head A
[ 45.531310] [drm] nouveau 0000:02:00.0: Load detected on head A
[ 45.667305] [drm] nouveau 0000:02:00.0: Load detected on head A
[ 45.799309] [drm] nouveau 0000:02:00.0: Load detected on head A
[ 45.859024] [drm] nouveau 0000:02:00.0: Setting dpms mode 3 on vga encoder
(output 0)
[ 45.879533] [drm] nouveau 0000:02:00.0: Setting dpms mode 0 on vga encoder
(output 0)
[ 45.879542] [drm] nouveau 0000:02:00.0: Output VGA-1 is running on CRTC 0
using output @
[ 46.687135] [drm] nouveau 0000:02:00.0: Load detected on head A
[ 46.999626] [drm] nouveau 0000:02:00.0: Load detected on head A
[ 49.563676] [drm] nouveau 0000:02:00.0: Load detected on head A
[ 50.291178] [drm] nouveau 0000:02:00.0: Load detected on head A
[ 51.327718] [drm] nouveau 0000:02:00.0: Load detected on head A
[ 63.467147] [drm] nouveau 0000:02:00.0: Load detected on head A
[ 63.863636] [drm] nouveau 0000:02:00.0: Load detected on head A
-- System Information:
Debian Release: 6.0.1
APT prefers proposed-updates
APT policy: (500, 'proposed-updates'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core)
Locale: LANG=sv_SE.utf8, LC_CTYPE=sv_SE.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xserver-xorg-video-nouveau depends on:
ii libc6 2.11.2-10 Embedded GNU C Library: Shared lib
ii libdrm-nouveau1 2.4.21-1~squeeze3 Userspace interface to nouveau-spe
ii xserver-xorg-core [xor 2:1.7.7-13 Xorg X server - core server
xserver-xorg-video-nouveau recommends no packages.
xserver-xorg-video-nouveau suggests no packages.
[nvidia-Xorg.log (text/plain, attachment)]
[nvidia-get-edid.txt (application/octet-stream, attachment)]
[nvXX-get-edid (text/plain, attachment)]
Information forwarded
to debian-bugs-dist@lists.debian.org, Debian X Strike Force <debian-x@lists.debian.org>:
Bug#624553; Package xserver-xorg-video-nouveau.
(Fri, 29 Apr 2011 16:27:08 GMT) (full text, mbox, link).
Acknowledgement sent
to Sven Joachim <svenjoac@gmx.de>:
Extra info received and forwarded to list. Copy sent to Debian X Strike Force <debian-x@lists.debian.org>.
(Fri, 29 Apr 2011 16:27:08 GMT) (full text, mbox, link).
Message #10 received at 624553@bugs.debian.org (full text, mbox, reply):
On 2011-04-29 17:00 +0200, David Westberg wrote:
> Package: xserver-xorg-video-nouveau
> Version: 1:0.0.15+git20100329+7858345-5
> Severity: normal
>
> EDID is not retrived using the nouveau driver. Thus driver does not use the
> monitor at default resolution, 1280x1024.
The nouveau driver gets EDID information from the kernel, so the
question is whether the kernel has it. Do you have something in
/sys/class/drm/card0-VGA-1/edid or /sys/class/drm/card0-DVI-I-1/edid ?
> The monitor connected is a Samsung SyncMaster 770TFT.
>
>
> The output from get-edid command is:
> ------------------------------------------------
> VBE/DDC service about to be called
> Read EDID
>
> Performing real mode VBE call
> Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0
> Function supported
> Call failed
>
> The EDID data should not be trusted as the VBE call failed
> Error: output block unchanged
> ----------------------------------------------
Strange that this succeeds if nvidia is loaded and fails otherwise.
Regards,
Sven
Information forwarded
to debian-bugs-dist@lists.debian.org, Debian X Strike Force <debian-x@lists.debian.org>:
Bug#624553; Package xserver-xorg-video-nouveau.
(Sun, 01 May 2011 12:15:03 GMT) (full text, mbox, link).
Acknowledgement sent
to David Westberg <david@uarda.dlinkddns.com>:
Extra info received and forwarded to list. Copy sent to Debian X Strike Force <debian-x@lists.debian.org>.
(Sun, 01 May 2011 12:15:11 GMT) (full text, mbox, link).
Message #15 received at 624553@bugs.debian.org (full text, mbox, reply):
On Fri, Apr 29, 2011 at 06:23:18PM +0200, Sven Joachim wrote: > On 2011-04-29 17:00 +0200, David Westberg wrote: > > > Package: xserver-xorg-video-nouveau > > Version: 1:0.0.15+git20100329+7858345-5 > > Severity: normal > > > > EDID is not retrived using the nouveau driver. Thus driver does not use the > > monitor at default resolution, 1280x1024. > > The nouveau driver gets EDID information from the kernel, so the > question is whether the kernel has it. Do you have something in > /sys/class/drm/card0-VGA-1/edid or /sys/class/drm/card0-DVI-I-1/edid ? They are empty as far as I can see. I switched to the nvidia driver to see what is displayed for the same files. They are however not to be found. Nvidia must have adifferent way of accessing the monitor information. > Strange that this succeeds if nvidia is loaded and fails otherwise. > > Regards, > Sven Depends I guess on the interaction between the driver and monitor and the get-edid command. could be some context that are not properly setup for the command to succed. Don't know the relationship between monitor information and the kernel and the driver. Is it something the driver has todo and provide to the kernel? /david
Send a report that this bug log contains spam.
Debbugs is free software and licensed under the terms of the GNU Public License version 2. The current version can be obtained from https://bugs.debian.org/debbugs-source/.
Copyright © 1999 Darren O. Benham, 1997,2003 nCipher Corporation Ltd, 1994-97 Ian Jackson, 2005-2017 Don Armstrong, and many other contributors.