Debian Bug report logs - #599168
linux-image-2.6.32-5-amd64: configure script invokes mkinitrd.yaird then fails, even after package yaird has been purged from system

version graph

Package: linux-2.6; Maintainer for linux-2.6 is Debian Kernel Team <debian-kernel@lists.debian.org>;

Reported by: Joel Roth <jroth@pobox.com>

Date: Tue, 5 Oct 2010 09:27:02 UTC

Severity: important

Found in version 2.6.32-15

Done: maximilian attems <max@stro.at>

Bug is archived. No further changes may be made.

Toggle useless messages

View this report as an mbox folder, status mbox, maintainer mbox


Report forwarded to debian-bugs-dist@lists.debian.org, Debian Kernel Team <debian-kernel@lists.debian.org>:
Bug#599168; Package linux-2.6. (Tue, 05 Oct 2010 09:27:05 GMT) Full text and rfc822 format available.

Acknowledgement sent to Joel Roth <jroth@pobox.com>:
New Bug report received and forwarded. Copy sent to Debian Kernel Team <debian-kernel@lists.debian.org>. (Tue, 05 Oct 2010 09:27:05 GMT) Full text and rfc822 format available.

Message #5 received at submit@bugs.debian.org (full text, mbox):

From: Joel Roth <jroth@pobox.com>
To: Debian Bug Tracking System <submit@bugs.debian.org>
Subject: linux-image-2.6.32-5-amd64: configure script invokes mkinitrd.yaird then fails, even after package yaird has been purged from system
Date: Mon, 04 Oct 2010 23:22:51 -1000
Package: linux-2.6
Version: 2.6.32-15
Severity: important


I have a different, working kernel, but each apt-get install
is delayed as apt-get tries to configure 
the linux-image package.

        Setting up linux-image-2.6.32-5-amd64 (2.6.32-15) ...
        Running depmod.
        Running /usr/sbin/mkinitrd.yaird.
        mkinitrd.yaird: invalid option -- 't'
        Terminating...
        /usr/sbin/mkinitrd.yaird failed to create initrd image.
        Failed to create initrd image

Even after I installed initramfs-tools and purged yaird,
the configure script attempted to invoke mkinitrd.yaird.

As a workaround, I created the initrd.img file manually
using update-initramfs, then installed a dummy
mkinitrd.yaird script containing only 'exit 0'. 

The next configure run succeeded.

-- Package-specific info:
** Kernel log: boot messages should be attached

** Model information
sys_vendor: TOSHIBA
product_name: Satellite L300D
product_version: PSLC8C-1234567
chassis_vendor: AMD
chassis_version: None
bios_vendor: Insyde Corp.
bios_version: 1.30
board_vendor: TOSHIBA
board_name: Portable PC
board_version: Base Board Version

** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600]
	Subsystem: Toshiba America Info Systems Device [1179:ff6a]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx) [1022:9602] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 00006000-00006fff
	Memory behind bridge: 96200000-963fffff
	Prefetchable memory behind bridge: 0000000080000000-000000008fffffff
	Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel modules: shpchp

00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) [1022:9604] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
	I/O behind bridge: 00005000-00005fff
	Memory behind bridge: 95200000-961fffff
	Prefetchable memory behind bridge: 0000000090000000-0000000090ffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) [1022:9605] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 00003000-00004fff
	Memory behind bridge: 94200000-951fffff
	Prefetchable memory behind bridge: 0000000091000000-00000000920fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) [1022:9606] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: 93100000-941fffff
	Prefetchable memory behind bridge: 0000000092100000-00000000930fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:07.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3) [1022:9607] (prog-if 00 [Normal decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA Controller [IDE mode] [1002:4390] (prog-if 01 [AHCI 1.0])
	Subsystem: Toshiba America Info Systems Device [1179:ff6a]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 22
	Region 0: I/O ports at 7038 [size=8]
	Region 1: I/O ports at 704c [size=4]
	Region 2: I/O ports at 7030 [size=8]
	Region 3: I/O ports at 7048 [size=4]
	Region 4: I/O ports at 7010 [size=16]
	Region 5: Memory at 96408000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ahci
	Kernel modules: ahci

00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
	Subsystem: Toshiba America Info Systems Device [1179:ff6a]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at 96407000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd
	Kernel modules: ohci-hcd

00:12.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
	Subsystem: Toshiba America Info Systems Device [1179:ff6a]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at 96406000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd
	Kernel modules: ohci-hcd

00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
	Subsystem: Toshiba America Info Systems Device [1179:ff6a]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 17
	Region 0: Memory at 96408500 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
	Subsystem: Toshiba America Info Systems Device [1179:ff6a]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at 96405000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd
	Kernel modules: ohci-hcd

00:13.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
	Subsystem: Toshiba America Info Systems Device [1179:ff6a]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at 96404000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd
	Kernel modules: ohci-hcd

00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
	Subsystem: Toshiba America Info Systems Device [1179:ff6a]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 19
	Region 0: Memory at 96408400 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 3a)
	Subsystem: Toshiba America Info Systems Device [1179:ff6a]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>
	Kernel driver in use: piix4_smbus
	Kernel modules: i2c-piix4

00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE Controller [1002:439c] (prog-if 8a [Master SecP PriP])
	Subsystem: Toshiba America Info Systems Device [1179:ff6a]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4 [size=1]
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374 [size=1]
	Region 4: I/O ports at 7000 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: ATIIXP_IDE
	Kernel modules: atiixp

00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383]
	Subsystem: Toshiba America Info Systems Device [1179:ff6a]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Interrupt: pin ? routed to IRQ 16
	Region 0: Memory at 96400000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: HDA Intel
	Kernel modules: snd-hda-intel

00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d]
	Subsystem: Toshiba America Info Systems Device [1179:ff6a]
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Bus: primary=00, secondary=80, subordinate=8f, sec-latency=64
	I/O behind bridge: 00001000-00001fff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Kernel modules: shpchp

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor HyperTransport Configuration [1022:1300] (rev 40)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Address Map [1022:1301]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor DRAM Controller [1022:1302]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Kernel modules: amd64_edac_mod

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Miscellaneous Control [1022:1303]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Link Control [1022:1304]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS780MC [Radeon HD 3100 Graphics] [1002:9613] (prog-if 00 [VGA controller])
	Subsystem: Toshiba America Info Systems Device [1179:ff6a]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at 80000000 (32-bit, prefetchable) [size=256M]
	Region 1: I/O ports at 6000 [size=256]
	Region 2: Memory at 96300000 (32-bit, non-prefetchable) [size=64K]
	Region 5: Memory at 96200000 (32-bit, non-prefetchable) [size=1M]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>

04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
	Subsystem: Toshiba America Info Systems Device [1179:ff6a]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 29
	Region 0: I/O ports at 3000 [size=256]
	Region 2: Memory at 91010000 (64-bit, prefetchable) [size=4K]
	Region 4: Memory at 91000000 (64-bit, prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: r8169
	Kernel modules: r8169

05:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01)
	Subsystem: Askey Computer Corp. Device [144f:7128]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at 93100000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: ath5k
	Kernel modules: ath5k


** USB devices:
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 062a:0000 Creative Labs Optical mouse
Bus 001 Device 002: ID 046e:550f Behavior Tech. Computer Corp. 
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


-- System Information:
Debian Release: squeeze/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: i386 (x86_64)

Kernel: Linux 2.6.31-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) (ignored: LC_ALL set to C)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii  debconf [debconf-2.0]         1.5.35     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.98.4     tools for generating an initramfs
ii  linux-base                    2.6.32-21  Linux image base package
ii  module-init-tools             3.12-1     tools for managing Linux kernel mo

Versions of packages linux-image-2.6.32-5-amd64 recommends:
ii  firmware-linux-free           2.6.32-21  Binary firmware for various driver
ii  libc6-i686                    2.11.2-2   GNU C Library: Shared libraries [i

Versions of packages linux-image-2.6.32-5-amd64 suggests:
ii  grub-legacy [grub]            0.97-62    GRand Unified Bootloader (Legacy v
ii  lilo                          1:22.8-8.3 LInux LOader - The Classic OS load
pn  linux-doc-2.6.32              <none>     (no description available)

Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
pn  firmware-iwlwifi              <none>     (no description available)
pn  firmware-linux                <none>     (no description available)
ii  firmware-linux-nonfree        0.26       Binary firmware for various driver
pn  firmware-qlogic               <none>     (no description available)
pn  firmware-ralink               <none>     (no description available)
pn  xen-hypervisor                <none>     (no description available)

-- debconf information:
* linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
  linux-image-2.6.32-5-amd64/postinst/bootloader-error-2.6.32-5-amd64:
  linux-image-2.6.32-5-amd64/prerm/would-invalidate-boot-loader-2.6.32-5-amd64: true
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
  linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
  linux-image-2.6.32-5-amd64/postinst/bootloader-test-error-2.6.32-5-amd64:




Information forwarded to debian-bugs-dist@lists.debian.org, Debian Kernel Team <debian-kernel@lists.debian.org>:
Bug#599168; Package linux-2.6. (Tue, 05 Oct 2010 09:45:03 GMT) Full text and rfc822 format available.

Acknowledgement sent to maximilian attems <max@stro.at>:
Extra info received and forwarded to list. Copy sent to Debian Kernel Team <debian-kernel@lists.debian.org>. (Tue, 05 Oct 2010 09:45:03 GMT) Full text and rfc822 format available.

Message #10 received at 599168@bugs.debian.org (full text, mbox):

From: maximilian attems <max@stro.at>
To: Joel Roth <jroth@pobox.com>, 599168@bugs.debian.org
Subject: Re: Bug#599168: linux-image-2.6.32-5-amd64: configure script invokes mkinitrd.yaird then fails, even after package yaird has been purged from system
Date: Tue, 5 Oct 2010 09:31:56 +0000
On Mon, Oct 04, 2010 at 11:22:51PM -1000, Joel Roth wrote:
> Package: linux-2.6
> Version: 2.6.32-15
> Severity: important
> 
> 
> I have a different, working kernel, but each apt-get install
> is delayed as apt-get tries to configure 
> the linux-image package.
> 
>         Setting up linux-image-2.6.32-5-amd64 (2.6.32-15) ...
>         Running depmod.
>         Running /usr/sbin/mkinitrd.yaird.
>         mkinitrd.yaird: invalid option -- 't'
>         Terminating...
>         /usr/sbin/mkinitrd.yaird failed to create initrd image.
>         Failed to create initrd image
> 
> Even after I installed initramfs-tools and purged yaird,
> the configure script attempted to invoke mkinitrd.yaird.
> 
> As a workaround, I created the initrd.img file manually
> using update-initramfs, then installed a dummy
> mkinitrd.yaird script containing only 'exit 0'. 
> 
> The next configure run succeeded.

known, as yaird is no longer supported. Please deinstall yaird and
make sure you have no reference of it in /etc/kernel-img.conf

initramfs-tools is the default these days. if you need a small
initramfs you can tweek it with BUSYBOX=no and MODULES=dep for
the adventorous. :)

kind regards

-- 
maks




Reply sent to maximilian attems <max@stro.at>:
You have taken responsibility. (Tue, 05 Oct 2010 09:45:05 GMT) Full text and rfc822 format available.

Notification sent to Joel Roth <jroth@pobox.com>:
Bug acknowledged by developer. (Tue, 05 Oct 2010 09:45:05 GMT) Full text and rfc822 format available.

Message #15 received at 599168-done@bugs.debian.org (full text, mbox):

From: maximilian attems <max@stro.at>
To: 599168-done@bugs.debian.org
Subject: Re: Bug#599168: linux-image-2.6.32-5-amd64: configure script invokes mkinitrd.yaird then fails, even after package yaird has been purged from system
Date: Tue, 5 Oct 2010 09:33:55 +0000
On Mon, Oct 04, 2010 at 11:22:51PM -1000, Joel Roth wrote:
> Package: linux-2.6
> Version: 2.6.32-15
> Severity: important
> 
> 
> I have a different, working kernel, but each apt-get install
> is delayed as apt-get tries to configure 
> the linux-image package.
> 
>         Setting up linux-image-2.6.32-5-amd64 (2.6.32-15) ...
>         Running depmod.
>         Running /usr/sbin/mkinitrd.yaird.
>         mkinitrd.yaird: invalid option -- 't'
>         Terminating...
>         /usr/sbin/mkinitrd.yaird failed to create initrd image.
>         Failed to create initrd image
> 
> Even after I installed initramfs-tools and purged yaird,
> the configure script attempted to invoke mkinitrd.yaird.
> 

not a bug anyway but closing as:
<jroth@pobox.com>: host mx-all.pobox.com[208.72.237.40] said: 550               
    <jroth@pobox.com>: Recipient address rejected: User unknown (in reply to    
    RCPT TO command)                                                            





Bug archived. Request was from Debbugs Internal Request <owner@bugs.debian.org> to internal_control@bugs.debian.org. (Wed, 03 Nov 2010 07:30:31 GMT) Full text and rfc822 format available.

Send a report that this bug log contains spam.


Debian bug tracking system administrator <owner@bugs.debian.org>. Last modified: Sun Apr 20 13:43:22 2014; Machine Name: beach.debian.org

Debian Bug tracking system
Copyright (C) 1999 Darren O. Benham, 1997,2003 nCipher Corporation Ltd, 1994-97 Ian Jackson.