Debian Bug report logs - #581525
rt2860: rt2860 doesn't connect to WPA2 networks

version graph

Package: linux-2.6; Maintainer for linux-2.6 is Debian Kernel Team <debian-kernel@lists.debian.org>;

Reported by: Miguel Angel Fraile <oldmike@gmail.com>

Date: Thu, 13 May 2010 12:33:01 UTC

Severity: important

Tags: moreinfo

Found in version 2.6.32-5

Done: Moritz Mühlenhoff <jmm@inutil.org>

Bug is archived. No further changes may be made.

Toggle useless messages

View this report as an mbox folder, status mbox, maintainer mbox


Report forwarded to debian-bugs-dist@lists.debian.org, oldmike@gmail.com, Debian Kernel Team <debian-kernel@lists.debian.org>:
Bug#581525; Package linux-2.6. (Thu, 13 May 2010 12:33:04 GMT) Full text and rfc822 format available.

Acknowledgement sent to Miguel Angel Fraile <oldmike@gmail.com>:
New Bug report received and forwarded. Copy sent to oldmike@gmail.com, Debian Kernel Team <debian-kernel@lists.debian.org>. (Thu, 13 May 2010 12:33:04 GMT) Full text and rfc822 format available.

Message #5 received at submit@bugs.debian.org (full text, mbox):

From: Miguel Angel Fraile <oldmike@gmail.com>
To: Debian Bug Tracking System <submit@bugs.debian.org>
Subject: rt2860: rt2860 doesn't connect to WPA2 networks
Date: Thu, 13 May 2010 14:31:34 +0200
Package: linux-2.6
Version: 2.6.32-5
Severity: important
File: rt2860

It seems it's not possible to connect to WPA2 wireless networks with the squeezix version of the rt2860 module.

I've tested it with both network-manager and wicd. Both of them are unable to authenticate with the correct password.

Both have NO problems to connect to WPA-PSK networks.

Tested with a Buffalo WZR-HP-G300NH router. No problem connecting to that WPA2 network with other devices.

The router encryption is set to WPA/WPA2-Mixed TKIP+AES, using a preshared key.

Tested also after updating the rt2860 firmware-ralink to the Debian SID version (v0.24). No luck, either.
 

-- Package-specific info:
** Version:
Linux version 2.6.32-trunk-686 (Debian 2.6.32-5) (ben@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Jan 10 06:32:16 UTC 2010

** Command line:
root=/dev/sda2

** Tainted: C (1024)
 * Module from drivers/staging has been loaded.

** Kernel log:
[   37.592358]  domain 0: span 0-1 level SIBLING
[   37.592370]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[   37.592399]   domain 1: span 0-1 level MC
[   37.592412]    groups: 0-1 (cpu_power = 1178)
[   38.332372] integrated sync not supported
[   38.485552] integrated sync not supported
[   38.628599] integrated sync not supported
[  102.927298] rt2860 0000:01:00.0: firmware: requesting rt2860.bin
[  103.092088] RX DESC f6392000  size = 2048
[  103.092669] <-- RTMPAllocTxRxRingMemory, Status=0
[  103.096998] --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
[  103.097024] 1. Phy Mode = 0
[  103.097031] 2. Phy Mode = 0
[  103.118425] RTMPSetPhyMode: channel is out of range, use first channel=1 
[  103.124896] 3. Phy Mode = 0
[  103.129534] MCS Set = 00 00 00 00 00
[  103.131161] <==== RTMPInitialize, Status=0
[  103.131236] 0x1300 = 00073200
[  113.752162] wlan0: no IPv6 routers present
[  157.719928] ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 479
[  194.623011] rt2860 0000:01:00.0: firmware: requesting rt2860.bin
[  194.634711] RX DESC f6392000  size = 2048
[  194.635424] <-- RTMPAllocTxRxRingMemory, Status=0
[  194.639958] --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
[  194.639974] 1. Phy Mode = 0
[  194.639981] 2. Phy Mode = 0
[  194.668230] 3. Phy Mode = 0
[  194.672891] MCS Set = 00 00 00 00 00
[  194.674519] <==== RTMPInitialize, Status=0
[  194.674595] 0x1300 = 000a4260
[  195.053307] ATL1E 0000:03:00.0: irq 27 for MSI/MSI-X
[  195.053485] ATL1E 0000:03:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
[  195.054063] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  195.054537] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  195.142556] rt2860 0000:01:00.0: firmware: requesting rt2860.bin
[  195.158459] RX DESC f661d000  size = 2048
[  195.159166] <-- RTMPAllocTxRxRingMemory, Status=0
[  195.167205] --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
[  195.167221] 1. Phy Mode = 0
[  195.167229] 2. Phy Mode = 0
[  195.195907] 3. Phy Mode = 0
[  195.200554] MCS Set = 00 00 00 00 00
[  195.202229] <==== RTMPInitialize, Status=0
[  195.202306] 0x1300 = 000a4260
[  197.569091] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
[  197.648862] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 170
[  197.649496] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
[  205.812139] eth0: no IPv6 routers present
[  205.980160] wlan0: no IPv6 routers present
[  207.662726] ===>rt_ioctl_giwscan. 3(3) BSS returned, data->length = 376
[  207.663032] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
[  217.670142] ===>rt_ioctl_giwscan. 3(3) BSS returned, data->length = 376
[  217.670444] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
[  227.682863] ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 479
[  227.683174] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
[  233.250889] rt2860 0000:01:00.0: firmware: requesting rt2860.bin
[  233.264040] RX DESC f63ad000  size = 2048
[  233.264793] <-- RTMPAllocTxRxRingMemory, Status=0
[  233.268723] --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
[  233.268735] 1. Phy Mode = 0
[  233.268740] 2. Phy Mode = 0
[  233.296695] 3. Phy Mode = 0
[  233.301337] MCS Set = 00 00 00 00 00
[  233.302960] <==== RTMPInitialize, Status=0
[  233.303035] 0x1300 = 000a4260
[  233.579715] ATL1E 0000:03:00.0: irq 27 for MSI/MSI-X
[  233.579926] ATL1E 0000:03:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
[  233.580565] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  233.581217] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  243.988150] eth0: no IPv6 routers present
[  266.659913] rt2860 0000:01:00.0: firmware: requesting rt2860.bin
[  266.672411] RX DESC f6333000  size = 2048
[  266.672991] <-- RTMPAllocTxRxRingMemory, Status=0
[  266.677377] --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
[  266.677389] 1. Phy Mode = 0
[  266.677395] 2. Phy Mode = 0
[  266.705257] 3. Phy Mode = 0
[  266.709891] MCS Set = 00 00 00 00 00
[  266.711516] <==== RTMPInitialize, Status=0
[  266.711591] 0x1300 = 000a4260
[  266.757927] rt2860 0000:01:00.0: firmware: requesting rt2860.bin
[  266.770206] RX DESC f6685000  size = 2048
[  266.770781] <-- RTMPAllocTxRxRingMemory, Status=0
[  266.774689] --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
[  266.774706] 1. Phy Mode = 0
[  266.774713] 2. Phy Mode = 0
[  266.802662] 3. Phy Mode = 0
[  266.807312] MCS Set = 00 00 00 00 00
[  266.808939] <==== RTMPInitialize, Status=0
[  266.809036] 0x1300 = 000a4260
[  267.075685] ATL1E 0000:03:00.0: irq 27 for MSI/MSI-X
[  267.075897] ATL1E 0000:03:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
[  267.076535] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  267.077184] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  267.253971] ATL1E 0000:03:00.0: irq 27 for MSI/MSI-X
[  267.254180] ATL1E 0000:03:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
[  267.254813] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  267.255463] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  277.381066] wlan0: no IPv6 routers present
[  277.540150] eth0: no IPv6 routers present

** Model information
not available

** Loaded modules:
Module                  Size  Used by
i915                  217023  2 
drm_kms_helper         17183  1 i915
drm                   107507  3 i915,drm_kms_helper
i2c_algo_bit            3497  1 i915
ppdev                   4058  0 
lp                      5570  0 
parport                22554  2 ppdev,lp
sco                     5837  2 
bridge                 32851  0 
stp                      996  1 bridge
bnep                    7376  2 
rfcomm                 25063  0 
l2cap                  21677  6 bnep,rfcomm
bluetooth              36259  6 sco,bnep,rfcomm,l2cap
loop                    9721  0 
snd_hda_codec_realtek   162851  1 
snd_hda_intel          15263  0 
joydev                  6771  0 
snd_hda_codec          45998  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep               4054  1 snd_hda_codec
uvcvideo               45194  0 
snd_pcm                47350  2 snd_hda_intel,snd_hda_codec
videodev               25445  1 uvcvideo
snd_seq                35303  0 
v4l1_compat            10250  2 uvcvideo,videodev
rt2860sta             378387  1 
eeepc_laptop            9355  0 
snd_timer              12258  2 snd_pcm,snd_seq
i2c_core               12612  4 i915,drm,i2c_algo_bit,videodev
snd_seq_device          3673  1 snd_seq
rfkill                 10196  4 bluetooth,eeepc_laptop
crc_ccitt               1039  1 rt2860sta
ac                      1640  0 
battery                 3782  0 
snd                    33551  8 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
rng_core                2178  0 
processor              25803  2 
soundcore               3450  1 snd
psmouse                44409  0 
pci_hotplug            18065  1 eeepc_laptop
snd_page_alloc          4977  2 snd_hda_intel,snd_pcm
serio_raw               2916  0 
evdev                   5609  24 
ext4                  254301  1 
mbcache                 3762  1 ext4
jbd2                   55835  1 ext4
crc16                   1027  2 l2cap,ext4
sd_mod                 25717  2 
crc_t10dif              1012  1 sd_mod
ata_generic             2015  0 
ide_pci_generic         1924  0 
ide_core               63850  1 ide_pci_generic
uhci_hcd               15953  0 
ata_piix               16513  1 
ehci_hcd               27230  0 
libata                113728  2 ata_generic,ata_piix
intel_agp              20145  1 
video                  14605  1 i915
atl1e                  23008  0 
scsi_mod              101073  2 sd_mod,libata
usbcore                97930  4 uvcvideo,uhci_hcd,ehci_hcd
nls_base                4541  1 usbcore
output                  1204  1 video
agpgart                19516  2 drm,intel_agp
button                  3598  1 i915
thermal                 9206  0 
fan                     2586  0 
thermal_sys             9378  4 processor,video,thermal,fan

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory Controller Hub [8086:27ac] (rev 03)
	Subsystem: ASUSTeK Computer Inc. Device [1043:8340]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae] (rev 03) (prog-if 00 [VGA controller])
	Subsystem: ASUSTeK Computer Inc. Device [1043:8340]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at f7f00000 (32-bit, non-prefetchable) [size=512K]
	Region 1: I/O ports at dc00 [size=8]
	Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
	Region 3: Memory at f7ec0000 (32-bit, non-prefetchable) [size=256K]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: i915

00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
	Subsystem: ASUSTeK Computer Inc. Device [1043:8340]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at f7f80000 (32-bit, non-prefetchable) [size=512K]
	Capabilities: <access denied>

00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02)
	Subsystem: ASUSTeK Computer Inc. Device [1043:831a]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at f7eb8000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: HDA Intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 00001000-00001fff
	Memory behind bridge: 40000000-401fffff
	Prefetchable memory behind bridge: 0000000040200000-00000000403fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: fbf00000-fbffffff
	Prefetchable memory behind bridge: 0000000040400000-00000000405fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=01, subordinate=02, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: f8000000-fbefffff
	Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 4: I/O ports at d400 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 4: I/O ports at d480 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at d800 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin D routed to IRQ 16
	Region 4: I/O ports at d880 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at f7eb7c00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
	Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 02) (prog-if 80 [Master])
	Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4 [size=1]
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374 [size=1]
	Region 4: I/O ports at ffa0 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: ata_piix

01:00.0 Network controller [0280]: RaLink RT2860 [1814:0781]
	Subsystem: RaLink Device [1814:2790]
	Physical Slot: eeepc-wifi
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at fbef0000 (32-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: rt2860

03:00.0 Ethernet controller [0200]: Attansic Technology Corp. Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller [1969:1026] (rev b0)
	Subsystem: ASUSTeK Computer Inc. Device [1043:8324]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 27
	Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K]
	Region 2: I/O ports at ec00 [size=128]
	Capabilities: <access denied>
	Kernel driver in use: ATL1E


** USB devices:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 04f2:b071 Chicony Electronics Co., Ltd 2.0M UVC Webcam / CNF7129
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (i686)

Kernel: Linux 2.6.32-trunk-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.32-trunk-686 depends on:
ii  debconf [debconf-2.0]        1.5.28      Debian configuration management sy
ii  initramfs-tools [linux-initr 0.93.4      tools for generating an initramfs
ii  module-init-tools            3.12~pre1-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.32-trunk-686 recommends:
pn  firmware-linux-free           <none>     (no description available)
ii  libc6-i686                    2.10.2-2   GNU C Library: Shared libraries [i

Versions of packages linux-image-2.6.32-trunk-686 suggests:
pn  grub | lilo                   <none>     (no description available)
pn  linux-doc-2.6.32              <none>     (no description available)

Versions of packages linux-image-2.6.32-trunk-686 is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
pn  firmware-iwlwifi              <none>     (no description available)
pn  firmware-linux                <none>     (no description available)
pn  firmware-linux-nonfree        <none>     (no description available)
pn  firmware-qlogic               <none>     (no description available)
ii  firmware-ralink               0.24       Binary firmware for Ralink RT2561,

-- debconf information:
  linux-image-2.6.32-trunk-686/prerm/would-invalidate-boot-loader-2.6.32-trunk-686: true
  linux-image-2.6.32-trunk-686/postinst/missing-firmware-2.6.32-trunk-686:
  linux-image-2.6.32-trunk-686/postinst/bootloader-test-error-2.6.32-trunk-686:
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.32-trunk-686/postinst/depmod-error-initrd-2.6.32-trunk-686: false
  linux-image-2.6.32-trunk-686/prerm/removing-running-kernel-2.6.32-trunk-686: true
  linux-image-2.6.32-trunk-686/postinst/bootloader-error-2.6.32-trunk-686:




Information forwarded to debian-bugs-dist@lists.debian.org, Debian Kernel Team <debian-kernel@lists.debian.org>:
Bug#581525; Package linux-2.6. (Fri, 22 Apr 2011 21:42:03 GMT) Full text and rfc822 format available.

Acknowledgement sent to Moritz Mühlenhoff <jmm@inutil.org>:
Extra info received and forwarded to list. Copy sent to Debian Kernel Team <debian-kernel@lists.debian.org>. (Fri, 22 Apr 2011 21:42:04 GMT) Full text and rfc822 format available.

Message #10 received at 581525@bugs.debian.org (full text, mbox):

From: Moritz Mühlenhoff <jmm@inutil.org>
To: Miguel Angel Fraile <oldmike@gmail.com>
Cc: 581525@bugs.debian.org, control@bugs.debian.org
Subject: Re: rt2860: rt2860 doesn't connect to WPA2 networks
Date: Fri, 22 Apr 2011 23:38:30 +0200
tags 581525 moreinfo
thanks

On Thu, May 13, 2010 at 02:31:34PM +0200, Miguel Angel Fraile wrote:
> Package: linux-2.6
> Version: 2.6.32-5
> Severity: important
> File: rt2860
> 
> It seems it's not possible to connect to WPA2 wireless networks with the squeezix version of the rt2860 module.
> 
> I've tested it with both network-manager and wicd. Both of them are unable to authenticate with the correct password.
> 
> Both have NO problems to connect to WPA-PSK networks.
> 
> Tested with a Buffalo WZR-HP-G300NH router. No problem connecting to that WPA2 network with other devices.
> 
> The router encryption is set to WPA/WPA2-Mixed TKIP+AES, using a preshared key.
> 
> Tested also after updating the rt2860 firmware-ralink to the Debian SID version (v0.24). No luck, either.

Does this still occur with the final Squeeze kernel or more recent kernels?

Cheers,
        Moritz




Added tag(s) moreinfo. Request was from Moritz Mühlenhoff <jmm@inutil.org> to control@bugs.debian.org. (Fri, 22 Apr 2011 21:42:06 GMT) Full text and rfc822 format available.

Information forwarded to debian-bugs-dist@lists.debian.org, Debian Kernel Team <debian-kernel@lists.debian.org>:
Bug#581525; Package linux-2.6. (Sat, 23 Apr 2011 11:39:15 GMT) Full text and rfc822 format available.

Acknowledgement sent to Míguel <oldmike@gmail.com>:
Extra info received and forwarded to list. Copy sent to Debian Kernel Team <debian-kernel@lists.debian.org>. (Sat, 23 Apr 2011 11:39:25 GMT) Full text and rfc822 format available.

Message #17 received at 581525@bugs.debian.org (full text, mbox):

From: Míguel <oldmike@gmail.com>
To: Moritz Mühlenhoff <jmm@inutil.org>
Cc: 581525@bugs.debian.org, control@bugs.debian.org
Subject: Re: rt2860: rt2860 doesn't connect to WPA2 networks
Date: Sat, 23 Apr 2011 13:35:57 +0200
[Message part 1 (text/plain, inline)]
It seems it was due to a conflict between the rt2870sta and the rt2800pci
modules.

Blacklisting rt2870sta solved the problem (both in Debian an Ubuntu).

Sorry for not asking to close the bug report before.

Thanks!

2011/4/22 Moritz Mühlenhoff <jmm@inutil.org>

> tags 581525 moreinfo
> thanks
>
> On Thu, May 13, 2010 at 02:31:34PM +0200, Miguel Angel Fraile wrote:
> > Package: linux-2.6
> > Version: 2.6.32-5
> > Severity: important
> > File: rt2860
> >
> > It seems it's not possible to connect to WPA2 wireless networks with the
> squeezix version of the rt2860 module.
> >
> > I've tested it with both network-manager and wicd. Both of them are
> unable to authenticate with the correct password.
> >
> > Both have NO problems to connect to WPA-PSK networks.
> >
> > Tested with a Buffalo WZR-HP-G300NH router. No problem connecting to that
> WPA2 network with other devices.
> >
> > The router encryption is set to WPA/WPA2-Mixed TKIP+AES, using a
> preshared key.
> >
> > Tested also after updating the rt2860 firmware-ralink to the Debian SID
> version (v0.24). No luck, either.
>
> Does this still occur with the final Squeeze kernel or more recent kernels?
>
> Cheers,
>         Moritz
>
[Message part 2 (text/html, inline)]

Reply sent to Moritz Mühlenhoff <jmm@inutil.org>:
You have taken responsibility. (Fri, 29 Apr 2011 22:48:09 GMT) Full text and rfc822 format available.

Notification sent to Miguel Angel Fraile <oldmike@gmail.com>:
Bug acknowledged by developer. (Fri, 29 Apr 2011 22:48:09 GMT) Full text and rfc822 format available.

Message #22 received at 581525-done@bugs.debian.org (full text, mbox):

From: Moritz Mühlenhoff <jmm@inutil.org>
To: Míguel <oldmike@gmail.com>
Cc: 581525-done@bugs.debian.org
Subject: Re: rt2860: rt2860 doesn't connect to WPA2 networks
Date: Sat, 30 Apr 2011 00:45:56 +0200
On Sat, Apr 23, 2011 at 01:35:57PM +0200, Míguel wrote:
> It seems it was due to a conflict between the rt2870sta and the rt2800pci
> modules.
> 
> Blacklisting rt2870sta solved the problem (both in Debian an Ubuntu).
> 
> Sorry for not asking to close the bug report before.

Closing the bug.

Cheers,
        Moritz




Bug archived. Request was from Debbugs Internal Request <owner@bugs.debian.org> to internal_control@bugs.debian.org. (Sat, 28 May 2011 07:34:43 GMT) Full text and rfc822 format available.

Send a report that this bug log contains spam.


Debian bug tracking system administrator <owner@bugs.debian.org>. Last modified: Sun Apr 20 00:00:15 2014; Machine Name: buxtehude.debian.org

Debian Bug tracking system
Copyright (C) 1999 Darren O. Benham, 1997,2003 nCipher Corporation Ltd, 1994-97 Ian Jackson.