Debian Bug report logs - #550620
No KCModule with key system-config-printer-kde available

version graph

Package: system-config-printer-kde; Maintainer for system-config-printer-kde is Debian Qt/KDE Maintainers <debian-qt-kde@lists.debian.org>; Source for system-config-printer-kde is src:kdeadmin.

Reported by: Wolfgang Schnitker <wolfgang.schnitker@gmx.de>

Date: Sun, 11 Oct 2009 16:18:01 UTC

Severity: normal

Found in versions kdeadmin/4:4.3.1-1, kdeadmin/4:4.3.2-1

Done: Sune Vuorela <debian@pusling.com>

Bug is archived. No further changes may be made.

Toggle useless messages

View this report as an mbox folder, status mbox, maintainer mbox


Report forwarded to debian-bugs-dist@lists.debian.org, Debian Qt/KDE Maintainers <debian-qt-kde@lists.debian.org>:
Bug#550620; Package system-config-printer-kde. (Sun, 11 Oct 2009 16:18:04 GMT) Full text and rfc822 format available.

Acknowledgement sent to Wolfgang Schnitker <wolfgang.schnitker@gmx.de>:
New Bug report received and forwarded. Copy sent to Debian Qt/KDE Maintainers <debian-qt-kde@lists.debian.org>. (Sun, 11 Oct 2009 16:18:05 GMT) Full text and rfc822 format available.

Message #5 received at submit@bugs.debian.org (full text, mbox):

From: Wolfgang Schnitker <wolfgang.schnitker@gmx.de>
To: Debian Bug Tracking System <submit@bugs.debian.org>
Subject: No KCModule with key system-config-printer-kde available
Date: Sun, 11 Oct 2009 18:03:55 +0200
Package: system-config-printer-kde
Version: 4:4.3.1-1
Severity: normal

In KDE Systemconfig the module for printer says, that the factory does not
support setup of components like printers because there is no interface to
KCModule with the key "system-config-printer-kde /
system-config-printer-kde.py". Due to the tips, this comes out of upgrading
KDE or using older modules. Please contact distro.

-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (990, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.30-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages system-config-printer-kde depends on:
ii  python-cupsutils              1.0.0-6    Python utility modules around the 
ii  python-kde4                   4:4.2.2-3  Python bindings for the KDE 4 libr
ii  python-qt4-dbus               4.4.4-6    DBus Support for PyQt4

system-config-printer-kde recommends no packages.

system-config-printer-kde suggests no packages.

-- no debconf information




Reply sent to Sune Vuorela <debian@pusling.com>:
You have taken responsibility. (Sun, 11 Oct 2009 17:27:04 GMT) Full text and rfc822 format available.

Notification sent to Wolfgang Schnitker <wolfgang.schnitker@gmx.de>:
Bug acknowledged by developer. (Sun, 11 Oct 2009 17:27:04 GMT) Full text and rfc822 format available.

Message #10 received at 550620-done@bugs.debian.org (full text, mbox):

From: Sune Vuorela <debian@pusling.com>
To: 550620-done@bugs.debian.org
Subject: Re: Bug#550620: No KCModule with key system-config-printer-kde available
Date: Sun, 11 Oct 2009 19:15:21 +0200
On Sunday 11 October 2009 18:03:55 Wolfgang Schnitker wrote:
> Package: system-config-printer-kde
> Version: 4:4.3.1-1
> Severity: normal
> 
> In KDE Systemconfig the module for printer says, that the factory does not
> support setup of components like printers because there is no interface to
> KCModule with the key "system-config-printer-kde /
> system-config-printer-kde.py". Due to the tips, this comes out of upgrading
> KDE or using older modules. Please contact distro.
> 
> -- System Information:
> Debian Release: squeeze/sid
>   APT prefers testing
>   APT policy: (990, 'testing')


> Versions of packages system-config-printer-kde depends on:
>  python-kde4                   4:4.2.2-3  Python bindings for the
>  KDE 4 libr 

This is a bug in python-kde4 in versions earlier than 4:4.3.1. This has been 
fixed in unstable, and we are currently working on getting it to migrate to 
testing.

From your angle, there is nothing to do except wait and/or pick kdebindings 
from unstable.

/Sune
-- 
How to ping to the folder?

First you neither should save from a GPU, nor must get access over the device, 
so that therefore from the file inside ICQ you have not to explore with the 
coaxial 2D connector on a PCI port to cancel a case on the controller.




Information forwarded to debian-bugs-dist@lists.debian.org, Debian Qt/KDE Maintainers <debian-qt-kde@lists.debian.org>:
Bug#550620; Package system-config-printer-kde. (Tue, 03 Nov 2009 19:06:19 GMT) Full text and rfc822 format available.

Acknowledgement sent to pietranera@gmail.com:
Extra info received and forwarded to list. Copy sent to Debian Qt/KDE Maintainers <debian-qt-kde@lists.debian.org>. (Tue, 03 Nov 2009 19:06:19 GMT) Full text and rfc822 format available.

Message #15 received at 550620@bugs.debian.org (full text, mbox):

From: Stefano <pietranera@gmail.com>
To: 550620@bugs.debian.org
Cc: wolfgang.schnitker@gmx.de, debian@pusling.com
Subject: system-config-printer-kde: "No KCModule Bug" still present
Date: Tue, 3 Nov 2009 13:30:46 -0500
Package: system-config-printer-kde
Version: 4:4.3.2-1
Severity: normal

*** Please type your report below this line ***

Hello,

accordingly to what found in the system-config-printer-kde bug reports I 
upgraded python-kde4 (and python-qt4-dbus) from unstable in the attempt to 
have a usable printer configuration in KDE4.

However when accessing the Printer Configuration panel from System Setting the 
error message reported by Wolfgang Schnitker is still present.

Also, when clicking on the "Printer Configuration" icon in the System Settings 
and error window pops up saying: "The password may be incorrect, or the server 
may be configured to deny remote administration"; then the "No KCModule Bug" is 
shown in the main window.

Since the printer configuration is an essential module, I hope that this bug 
will be solved as soon as possible.

Thank you.

-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  Architecture: i386 (i686)

Kernel: Linux 2.6.30-2-686

Versions of packages system-config-printer-kde depends on:
ii  python-cupsutils              1.0.0-6    Python utility modules around the
ii  python-kde4                   4:4.3.2-1  Python bindings for the KDE 4 
libr
ii  python-qt4-dbus               4.4.4-6    DBus Support for PyQt4

system-config-printer-kde recommends no packages.

system-config-printer-kde suggests no packages.

-- no debconf information




Information forwarded to debian-bugs-dist@lists.debian.org, Debian Qt/KDE Maintainers <debian-qt-kde@lists.debian.org>:
Bug#550620; Package system-config-printer-kde. (Tue, 03 Nov 2009 19:12:03 GMT) Full text and rfc822 format available.

Acknowledgement sent to pietranera@gmail.com:
Extra info received and forwarded to list. Copy sent to Debian Qt/KDE Maintainers <debian-qt-kde@lists.debian.org>. (Tue, 03 Nov 2009 19:12:04 GMT) Full text and rfc822 format available.

Message #20 received at 550620@bugs.debian.org (full text, mbox):

From: Stefano <pietranera@gmail.com>
To: 550620@bugs.debian.org
Cc: wolfgang.schnitker@gmx.de, debian@pusling.com
Subject: Re: system-config-printer-kde: "No KCModule Bug" still present
Date: Tue, 3 Nov 2009 13:45:11 -0500
Hi again,

I just tried to run the printer config as superuser for terminal:

sudo /usr/bin/kcmshell4 system-config-printer-kde

and the KCModule Bug does not show up anymore.

Anyway, there is little clue that one has to run the printer settings as root 
from a terminal to avoid the ugly "no KCModule" error. I would have expected a 
greyed-out window telling me that only root could configure the printers.

Also, when browsing the installed printers, the module keeps asking whether to 
save or discard the changes even if no change has been done.

I am sorry for this second email, I should have tested the "sudo option" 
before.

Thank you again.

On Tuesday 03 November 2009 13:30:46 Stefano wrote:
> Package: system-config-printer-kde
> Version: 4:4.3.2-1
> Severity: normal
> 
> *** Please type your report below this line ***
> 
> Hello,
> 
> accordingly to what found in the system-config-printer-kde bug reports I
> upgraded python-kde4 (and python-qt4-dbus) from unstable in the attempt to
> have a usable printer configuration in KDE4.
> 
> However when accessing the Printer Configuration panel from System Setting
>  the error message reported by Wolfgang Schnitker is still present.
> 
> Also, when clicking on the "Printer Configuration" icon in the System
>  Settings and error window pops up saying: "The password may be incorrect,
>  or the server may be configured to deny remote administration"; then the
>  "No KCModule Bug" is shown in the main window.
> 
> Since the printer configuration is an essential module, I hope that this
>  bug will be solved as soon as possible.
> 
> Thank you.
> 
> -- System Information:
> Debian Release: squeeze/sid
>   APT prefers testing
>   Architecture: i386 (i686)
> 
> Kernel: Linux 2.6.30-2-686
> 
> Versions of packages system-config-printer-kde depends on:
> ii  python-cupsutils              1.0.0-6    Python utility modules around
>  the ii  python-kde4                   4:4.3.2-1  Python bindings for the
>  KDE 4 libr
> ii  python-qt4-dbus               4.4.4-6    DBus Support for PyQt4
> 
> system-config-printer-kde recommends no packages.
> 
> system-config-printer-kde suggests no packages.
> 
> -- no debconf information
> 




Bug archived. Request was from Debbugs Internal Request <owner@bugs.debian.org> to internal_control@bugs.debian.org. (Wed, 02 Dec 2009 07:28:09 GMT) Full text and rfc822 format available.

Send a report that this bug log contains spam.


Debian bug tracking system administrator <owner@bugs.debian.org>. Last modified: Fri Apr 18 21:41:28 2014; Machine Name: beach.debian.org

Debian Bug tracking system
Copyright (C) 1999 Darren O. Benham, 1997,2003 nCipher Corporation Ltd, 1994-97 Ian Jackson.