Debian Bug report logs - #444314
gspca-modules-2.6.21-2-686: gspca bugs with my logitech webcam

Toggle useless messages

Message #5 received at submit@bugs.debian.org (full text, mbox, reply):

From: Adrien Grellier <adrien.grellier@laposte.net>

To: Debian Bug Tracking System <submit@bugs.debian.org>

Subject: gspca-modules-2.6.21-2-686: gspca bugs with my logitech webcam

Date: Thu, 27 Sep 2007 19:49:13 +0200

Package: gspca-modules-2.6.21-2-686
Version: 2.6.21+01.00.18-4
Severity: normal

I try to install my logitech webcam under debian. So I installed the gspca
module for my kernel, but when I plug the webcam, I must wait a very long time,
as if the module was waiting for something, and the light on the webcam are turn
on.
I tried to launch camorama or ekiga, but they both freeze.

lsusb gives me for the webcam :
Bus 003 Device 002: ID 046d:08da Logitech, Inc. 

dmesg gives me :
Linux video capture interface: v2.00
usbcore: registered new interface driver gspca
/usr/src/modules/gspca/gspca_core.c: gspca driver 01.00.18 registered
usb 3-1: new full speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
/usr/src/modules/gspca/gspca_core.c: USB GSPCA camera found.(ZC3XX) 
/usr/src/modules/gspca/gspca_core.c: [spca5xx_probe:4098] Camera type JPEG 
/usr/src/modules/gspca/Vimicro/zc3xx.h: [zc3xx_config:515] Sensor ID:7
/usr/src/modules/gspca/Vimicro/zc3xx.h: [zc3xx_config:597] Find Sensor HV7131R(c)
/usr/src/modules/gspca/gspca_core.c: [spca5xx_getcapability:1215] maxw 640 maxh 480 minw 176 minh 144
uhci_hcd 0000:00:1d.2: Unlink after no-IRQ?  Controller is probably using the wrong IRQ.
usbcore: registered new interface driver snd-usb-audio
/usr/src/modules/gspca/gspca_core.c: [spca5xx_set_light_freq:1889] Sensor currently not support light frequency banding filters.
/usr/src/modules/gspca/gspca_core.c: [gspca_set_isoc_ep:903] ISO EndPoint found 0x81 AlternateSet 7
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
/usr/src/modules/gspca/gspca_core.c: [spca50x_isoc_irq:1110] Non-zero status (-18) in isoc completion handler.
/usr/src/modules/gspca/gspca_core.c: [spca50x_isoc_irq:1110] Non-zero status (-18) in isoc completion handler.
/usr/src/modules/gspca/gspca_core.c: [spca50x_isoc_irq:1110] Non-zero status (-18) in isoc completion handler.
/usr/src/modules/gspca/gspca_core.c: [spca50x_isoc_irq:1110] Non-zero status (-18) in isoc completion handler.
end_request: I/O error, dev sr0, sector 64
isofs_fill_super: bread failed, dev=sr0, iso_blknum=16, block=16
/usr/src/modules/gspca/gspca_core.c: [spca5xx_set_light_freq:1889] Sensor currently not support light frequency banding filters.
/usr/src/modules/gspca/gspca_core.c: [gspca_set_isoc_ep:903] ISO EndPoint found 0x81 AlternateSet 7
usbcore: deregistering interface driver gspca
/usr/src/modules/gspca/gspca_core.c: driver gspca deregistered
/home/user/linux-modules-extra-2.6/debian/build/build_i386_none_686_gspca/gspca_core.c: USB GSPCA camera found.(ZC3XX) 
/home/user/linux-modules-extra-2.6/debian/build/build_i386_none_686_gspca/gspca_core.c: [spca5xx_probe:4098] Camera type JPEG 
/home/user/linux-modules-extra-2.6/debian/build/build_i386_none_686_gspca/Vimicro/zc3xx.h: [zc3xx_config:515] Sensor ID:7
/home/user/linux-modules-extra-2.6/debian/build/build_i386_none_686_gspca/Vimicro/zc3xx.h: [zc3xx_config:597] Find Sensor HV7131R(c)
/home/user/linux-modules-extra-2.6/debian/build/build_i386_none_686_gspca/gspca_core.c: [spca5xx_getcapability:1215] maxw 640 maxh 480 minw 176 minh 144
usbcore: registered new interface driver gspca
/home/user/linux-modules-extra-2.6/debian/build/build_i386_none_686_gspca/gspca_core.c: gspca driver 2.6.21 registered
/home/user/linux-modules-extra-2.6/debian/build/build_i386_none_686_gspca/gspca_core.c: [spca5xx_set_light_freq:1889] Sensor currently not support light frequency banding filters.
/home/user/linux-modules-extra-2.6/debian/build/build_i386_none_686_gspca/gspca_core.c: [gspca_set_isoc_ep:903] ISO EndPoint found 0x81 AlternateSet 7

I try with the gspca-module-2.6.21-2-686 and with module assistant, but I obtain
the same result.
What can I do to play with my webcam ?

Regards,

adrien

-- System Information:
Debian Release: lenny/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (i686)

Kernel: Linux 2.6.21-2-686 (SMP w/1 CPU core)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages gspca-modules-2.6.21-2-686 depends on:
ii  linux-image-2.6.21-2-686 [lin 2.6.21-6   Linux 2.6.21 image on PPro/Celeron

gspca-modules-2.6.21-2-686 recommends no packages.

-- no debconf information

Message #12 received at 444314@bugs.debian.org (full text, mbox, reply):

From: Omer Zak <w1@zak.co.il>

To: 444314@bugs.debian.org

Subject: Probably the same as bug #423920

Date: Sun, 20 Apr 2008 04:09:22 +0300

Message #17 received at 444314-done@bugs.debian.org (full text, mbox, reply):

From: Marco Rodrigues <gothicx@sapo.pt>

To: 444314-done@bugs.debian.org

Subject: gspca has been removed from Debian, closing #444314

Date: Tue, 04 Aug 2009 23:17:37 +0100

Version: 01.00.20-1+rm

The gspca package has been removed from Debian so we are closing
the bugs that were still opened against it.

For more information about this package's removal, read
http://bugs.debian.org/519463 . That bug might give the reasons why
this package was removed, and suggestions of possible replacements.

Don't hesitate to reply to this mail if you have any question.

Thank you for your contribution to Debian.

Kind regards,
--
Marco Rodrigues

Send a report that this bug log contains spam.