Debian Bug report logs - #385233
Debian Netinstall 3.1r2 cannot detect cdrom on Intel D945GNT motherboard

Package: installation-reports; Maintainer for installation-reports is Debian Install Team <debian-boot@lists.debian.org>;

Reported by: Dave Bechtel <kingneutron@yahoo.com>

Date: Tue, 29 Aug 2006 23:48:08 UTC

Severity: normal

Done: stappers@stappers.nl (Geert Stappers)

Bug is archived. No further changes may be made.

Toggle useless messages

View this report as an mbox folder, status mbox, maintainer mbox


Report forwarded to debian-bugs-dist@lists.debian.org, Debian Install Team <debian-boot@lists.debian.org>:
Bug#385233; Package installation-reports. Full text and rfc822 format available.

Acknowledgement sent to Dave Bechtel <kingneutron@yahoo.com>:
New Bug report received and forwarded. Copy sent to Debian Install Team <debian-boot@lists.debian.org>. Full text and rfc822 format available.

Message #5 received at submit@bugs.debian.org (full text, mbox):

From: Dave Bechtel <kingneutron@yahoo.com>
To: submit@bugs.debian.org
Cc: kingneutron@yahoo.com
Subject: Debian Netinstall 3.1r2 cannot detect cdrom on Intel D945GNT motherboard
Date: Tue, 29 Aug 2006 16:29:29 -0700 (PDT)
Package: installation-reports

Boot method: <How did you boot the installer?> CD
Image version: <Fill in date and from where you got the image> April 2006,
Debian FTP site - Debian Netinstall 3.1 R2 
http://cdimage.debian.org/debian-cd/3.1_r2/i386/iso-cd/debian-31r2-i386-netinst.iso

Date: <Date and time of the install> 2006.0829

Machine: <Description of machine (eg, IBM Thinkpad R32)> Systemax 
Mid-tower ATX, Intel D945GNT Motherboard

Processor: Intel Pentium D (805) 2.66 GHz Dual Core
Memory: 2048M

Disk: SATA 80GB 7200RPM
Partitions: <df -Tl will do; the raw partition table is preferred>

fdisk -l /dev/sda

Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1           5       40131   83  Linux
/dev/sda2   *           6        2438    19543072+   7  HPFS/NTFS
/dev/sda3            2439        9729    58564957+   5  Extended
/dev/sda5            2439        2563     1004031   82  Linux swap / Solaris
/dev/sda6            2564        3435     7004308+  83  Linux
/dev/sda7            3436        4058     5004216   83  Linux
/dev/sda8            4059        7098    24418768+   b  W95 FAT32
/dev/sda9            7099        8096     8016403+   b  W95 FAT32
/dev/sda10           8097        9729    13117041   83  Linux


Output of lspci and lspci -n:

lspci
0000:00:00.0 Host bridge: Intel Corporation 945G/P Memory Controller Hub (rev
02)
0000:00:01.0 PCI bridge: Intel Corporation 945G/P PCI Express Graphics Port
(rev 02)
0000:00:1b.0 0403: Intel Corporation 82801G (ICH7 Family) High Definition
Audio Controller (rev 01)
0000:00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 1 (rev 01)
0000:00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 3 (rev 01)
0000:00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 4 (rev 01)
0000:00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI
Express Port 5 (rev 01)
0000:00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI
Express Port 6 (rev 01)
0000:00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
#1 (rev 01)
0000:00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
#2 (rev 01)
0000:00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
#3 (rev 01)
0000:00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
#4 (rev 01)
0000:00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller (rev 01)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
0000:00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC
Interface Bridge (rev 01)

0000:00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE
Controller (rev 01)

0000:00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family)
Serial ATA Storage Controllers cc=IDE (rev 01)
0000:00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller
(rev 01)
0000:01:00.0 VGA compatible controller: nVidia Corporation: Unknown device
01df (rev a1)
0000:02:00.0 Ethernet controller: Intel Corporation 82573V Gigabit Ethernet
Controller (Copper) (rev 03)
0000:07:01.0 RAID bus controller: Silicon Image, Inc. PCI0680 Ultra ATA-133
Host Controller (rev 02)
0000:07:02.0 Ethernet controller: D-Link System Inc RTL8139 Ethernet (rev 10)
0000:07:05.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000
Controller (PHY/Link)

--

lspci -n
0000:00:00.0 0600: 8086:2770 (rev 02)
0000:00:01.0 0604: 8086:2771 (rev 02)
0000:00:1b.0 0403: 8086:27d8 (rev 01)
0000:00:1c.0 0604: 8086:27d0 (rev 01)
0000:00:1c.2 0604: 8086:27d4 (rev 01)
0000:00:1c.3 0604: 8086:27d6 (rev 01)
0000:00:1c.4 0604: 8086:27e0 (rev 01)
0000:00:1c.5 0604: 8086:27e2 (rev 01)
0000:00:1d.0 0c03: 8086:27c8 (rev 01)
0000:00:1d.1 0c03: 8086:27c9 (rev 01)
0000:00:1d.2 0c03: 8086:27ca (rev 01)
0000:00:1d.3 0c03: 8086:27cb (rev 01)
0000:00:1d.7 0c03: 8086:27cc (rev 01)
0000:00:1e.0 0604: 8086:244e (rev e1)
0000:00:1f.0 0601: 8086:27b8 (rev 01)
0000:00:1f.1 0101: 8086:27df (rev 01)
0000:00:1f.2 0101: 8086:27c0 (rev 01)
0000:00:1f.3 0c05: 8086:27da (rev 01)
0000:01:00.0 0300: 10de:01df (rev a1)
0000:02:00.0 0200: 8086:108b (rev 03)
0000:07:01.0 0104: 1095:0680 (rev 02)
0000:07:02.0 0200: 1186:1300 (rev 10)
0000:07:05.0 0c00: 104c:8024

--

lspci -v
0000:00:00.0 Host bridge: Intel Corporation 945G/P Memory Controller Hub (rev
02)
        Subsystem: Intel Corporation: Unknown device 544e
        Flags: bus master, fast devsel, latency 0
        Capabilities: [e0] #09 [5109]

0000:00:01.0 PCI bridge: Intel Corporation 945G/P PCI Express Graphics Port
(rev 02) (prog-if 00 [N
ormal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        Memory behind bridge: 90000000-91ffffff
        Prefetchable memory behind bridge: 0000000080000000-000000008ff00000
        Capabilities: [88] #0d [0000]
        Capabilities: [80] Power Management version 2
        Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
        Capabilities: [a0] #10 [0141]

0000:00:1b.0 0403: Intel Corporation 82801G (ICH7 Family) High Definition
Audio Controller (rev 01)
        Subsystem: Intel Corporation: Unknown device 0202
        Flags: bus master, fast devsel, latency 0, IRQ 20
        Memory at 92200000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
        Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
        Capabilities: [70] #10 [0091]

0000:00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 1 (rev 01) (prog-i
f 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 00002000-00002fff
        Memory behind bridge: 92100000-921fffff
        Capabilities: [40] #10 [0141]
        Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
        Capabilities: [90] #0d [0000]
        Capabilities: [a0] Power Management version 2

0000:00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 3 (rev 01) (prog-i
f 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        Memory behind bridge: 92300000-923fffff
        Capabilities: [40] #10 [0141]
        Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
        Capabilities: [90] #0d [0000]
        Capabilities: [a0] Power Management version 2

0000:00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 4 (rev 01) (prog-i
f 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
        Memory behind bridge: 92400000-924fffff
        Capabilities: [40] #10 [0141]
        Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
        Capabilities: [90] #0d [0000]
        Capabilities: [a0] Power Management version 2

0000:00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI
Express Port 5 (rev 01)
 (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
        Memory behind bridge: 92500000-925fffff
:                                                    Capabilities: [40] #10
[0141]
        Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
        Capabilities: [90] #0d [0000]
        Capabilities: [a0] Power Management version 2

0000:00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI
Express Port 6 (rev 01)
 (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
        Memory behind bridge: 92600000-926fffff
        Capabilities: [40] #10 [0141]
        Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
        Capabilities: [90] #0d [0000]
        Capabilities: [a0] Power Management version 2

0000:00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
#1 (rev 01) (prog-if 0
0 [UHCI])
        Subsystem: Intel Corporation: Unknown device 544e
        Flags: bus master, medium devsel, latency 0, IRQ 21
        I/O ports at 3080 [size=32]

0000:00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
#2 (rev 01) (prog-if 0
0 [UHCI])
        Subsystem: Intel Corporation: Unknown device 544e
        Flags: bus master, medium devsel, latency 0, IRQ 19
        I/O ports at 3060 [size=32]

0000:00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
#3 (rev 01) (prog-if 0
0 [UHCI])
        Subsystem: Intel Corporation: Unknown device 544e
                              Flags: bus master, medium devsel, latency 0, IRQ
18
        I/O ports at 3040 [size=32]

0000:00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
#4 (rev 01) (prog-if 0
0 [UHCI])
        Subsystem: Intel Corporation: Unknown device 544e
        Flags: bus master, medium devsel, latency 0, IRQ 16
        I/O ports at 3020 [size=32]

0000:00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller (rev 01) (
prog-if 20 [EHCI])
        Subsystem: Intel Corporation: Unknown device 544e
        Flags: bus master, medium devsel, latency 0, IRQ 21
        Memory at 92204400 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
        Capabilities: [58] #0a [20a0]

0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if
01 [Subtractive decod
e])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=07, subordinate=07, sec-latency=32
        I/O behind bridge: 00001000-00001fff
        Memory behind bridge: 92000000-920fffff
        Capabilities: [50] #0d [0000]

0000:00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC
Interface Bridge (rev 01)
        Subsystem: Intel Corporation: Unknown device 544e
        Flags: bus master, medium devsel, latency 0
        Capabilities: [e0] #09 [100c]
0000:00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE
Controller (rev 01) (prog-if
 8a [Master SecP PriP])
        Subsystem: Intel Corporation: Unknown device 544e
        Flags: bus master, medium devsel, latency 0, IRQ 18
        I/O ports at <unassigned>
        I/O ports at <unassigned>
        I/O ports at <unassigned>
        I/O ports at <unassigned>
        I/O ports at 30b0 [size=16]

0000:00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family)
Serial ATA Storage Contro
llers cc=IDE (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
        Subsystem: Intel Corporation: Unknown device 544e
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
        I/O ports at 30c8 [size=8]
        I/O ports at 30e4 [size=4]
        I/O ports at 30c0 [size=8]
        I/O ports at 30e0 [size=4]
        I/O ports at 30a0 [size=16]
        Memory at 92204000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [70] Power Management version 2

0000:00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller
(rev 01)
        Subsystem: Intel Corporation: Unknown device 544e
        Flags: medium devsel, IRQ 11
        I/O ports at 3000 [size=32]

0000:01:00.0 VGA compatible controller: nVidia Corporation: Unknown device
01df (rev a1) (prog-if 0
0 [VGA])
        Subsystem: XFX Pine Group Inc.: Unknown device 2200
        Flags: bus master, fast devsel, latency 0, IRQ 11
        Memory at 91000000 (32-bit, non-prefetchable) [size=16M]
        Memory at 80000000 (64-bit, prefetchable) [size=256M]
        Memory at 90000000 (64-bit, non-prefetchable) [size=16M]
        Capabilities: [60] Power Management version 2
        Capabilities: [68] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
        Capabilities: [78] #10 [0001]

0000:02:00.0 Ethernet controller: Intel Corporation 82573V Gigabit Ethernet
Controller (Copper) (re
v 03)
        Subsystem: Intel Corporation: Unknown device 3094
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at 92100000 (32-bit, non-prefetchable) [size=128K]
        I/O ports at 2000 [size=32]
        Capabilities: [c8] Power Management version 2
        Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
        Capabilities: [e0] #10 [0001]

0000:07:01.0 RAID bus controller: Silicon Image, Inc. PCI0680 Ultra ATA-133
Host Controller (rev 02
)
        Subsystem: Silicon Image, Inc. Winic W-680 (Silicon Image 680 based)
        Flags: bus master, medium devsel, latency 32, IRQ 20
        I/O ports at 1118 [size=8]
        I/O ports at 1124 [size=4]
        I/O ports at 1110 [size=8]
        I/O ports at 1120 [size=4]
        I/O ports at 1100 [size=16]
        Memory at 92004900 (32-bit, non-prefetchable) [size=256]
        Expansion ROM at fff80000 [disabled] [size=512K]
        Capabilities: [60] Power Management version 2
        Capabilities: [e0] #10 [0001]

0000:07:01.0 RAID bus controller: Silicon Image, Inc. PCI0680 Ultra ATA-133
Host Controller (rev 02
)
        Subsystem: Silicon Image, Inc. Winic W-680 (Silicon Image 680 based)
        Flags: bus master, medium devsel, latency 32, IRQ 20
        I/O ports at 1118 [size=8]
        I/O ports at 1124 [size=4]
        I/O ports at 1110 [size=8]
        I/O ports at 1120 [size=4]
        I/O ports at 1100 [size=16]
        Memory at 92004900 (32-bit, non-prefetchable) [size=256]
        Expansion ROM at fff80000 [disabled] [size=512K]
        Capabilities: [60] Power Management version 2

0000:07:02.0 Ethernet controller: D-Link System Inc RTL8139 Ethernet (rev 10)
        Subsystem: D-Link System Inc DFE-530TX+ 10/100 Ethernet Adapter
        Flags: bus master, medium devsel, latency 32, IRQ 18
        I/O ports at 1000 [size=256]
        Memory at 92004800 (32-bit, non-prefetchable) [size=256]
        Capabilities: [50] Power Management version 2

0000:07:05.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000
Controller (PHY/Link
) (prog-if 10 [OHCI])
        Subsystem: Intel Corporation: Unknown device 544e
        Flags: bus master, medium devsel, latency 32, IRQ 17
        Memory at 92004000 (32-bit, non-prefetchable) [size=2K]
        Memory at 92000000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [44] Power Management version 2

--

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O ]
Configure network HW:   [O ]
Config network:         [O ]
Detect CD:              [E ]
Load installer modules: [ ]
Detect hard drives:     [ ]
Partition hard drives:  [ ]
Create file systems:    [ ]
Mount partitions:       [ ]
Install base system:    [ ]
Install boot loader:    [ ]
Reboot:                 [ ]

Comments/Problems:

<Description of the install, in prose, and any thoughts, comments
      and ideas you had during the initial install.>

--Intel page for my motherboard (mine is running @ 533MHz ):
http://www.intel.com/products/motherboard/d945gnt/index.htm

--Booted CD with ' linux26 ' boot parm, answered locale prompts, failed to
detect CD.  Could not continue install.  See " dmesg " output below.

--Knoppix 2006.0601 and Ubuntu 6.06.1 (64-bit) booted OK and detected all HW.
Sarge may just need a more recent kernel - I will try Debian Unstable.

--Thisbox has a Silicon Image IDE133 (siimage) PCI card added on.
Motherboard IDE is as follows, from Knoppix ' dmesg ':

RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH7: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ICH7: chipset revision 1
ICH7: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x30b0-0x30b7, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
hda: SONY DVD RW DW-Q120A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
SiI680: IDE controller at PCI slot 0000:07:01.0
ACPI: PCI Interrupt 0000:07:01.0[A] -> GSI 22 (level, low) -> IRQ 20
SiI680: chipset revision 2
SiI680: BASE CLOCK == 133
SiI680: 100% native mode on irq 20
    ide1: MMIO-DMA , BIOS settings: hdc:pio, hdd:pio
    ide2: MMIO-DMA , BIOS settings: hde:pio, hdf:pio
Probing IDE interface ide1...
hdc: Maxtor 4R120L0, ATA DISK drive
hdd: Maxtor 6L120P0, ATA DISK drive
ide1 at 0xf8804980-0xf8804987,0xf880498a on irq 20
Probing IDE interface ide2...
Probing IDE interface ide2...
hdc: max request size: 64KiB
hdc: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
hdc: cache flushes supported
 hdc: hdc2
hdd: max request size: 64KiB
hdd: 240121728 sectors (122942 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(133)
hdd: cache flushes supported
 hdd: hdd2
hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
libata version 1.20 loaded.
ata_piix 0000:00:1f.2: version 1.05
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x30C8 ctl 0x30E6 bmdma 0x30A0 irq 19
ata2: SATA max UDMA/133 cmd 0x30C0 ctl 0x30E2 bmdma 0x30A8 irq 19
ata1: dev 0 cfg 49:2f00 82:7469 83:7f01 84:4023 85:7469 86:3c01 87:4023
88:207f
ata1: dev 0 ATA-7, max UDMA/133, 156301488 sectors: LBA48
ata1: dev 0 configured for UDMA/133
scsi0 : ata_piix
ata2: SATA port has no device.
scsi1 : ata_piix
  Vendor: ATA       Model: WDC WD800JD-22MS  Rev: 10.0
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
sd 0:0:0:0: Attached scsi disk sda


Contents above ThisLine (C)ThisYear KingNeutron Ltd.
===== Check out KNOPPIX Debian/Linux 700MB Live CD:
===== http://www.knopper.net/knoppix/index-old-en.html
"C00K13 M0N573R 0WNZ J00!! PH34R C00K13 M0N573R 4ND 0SC4R 4ND
3LM0 4ND 5NUFFL3UP46U5 4ND 7H3 31337 535AM3 57R337 CR3W!!"
.dotgoeshere.

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 



Information forwarded to debian-bugs-dist@lists.debian.org, Debian Install Team <debian-boot@lists.debian.org>:
Bug#385233; Package installation-reports. Full text and rfc822 format available.

Acknowledgement sent to 385233@bugs.debian.org:
Extra info received and forwarded to list. Copy sent to Debian Install Team <debian-boot@lists.debian.org>. Full text and rfc822 format available.

Message #10 received at 385233@bugs.debian.org (full text, mbox):

From: stappers@stappers.nl (Geert Stappers)
To: Dave Bechtel <kingneutron@yahoo.com>, 385233@bugs.debian.org
Subject: Re: Bug#385233: Debian Netinstall 3.1r2 cannot detect cdrom on Intel D945GNT motherboard
Date: Wed, 30 Aug 2006 23:56:12 +0200
On Tue, Aug 29, 2006 at 04:29:29PM -0700, Dave Bechtel wrote:
> Package: installation-reports
> 
> Boot method:  CD
> Image version:  April 2006,
> Debian FTP site - Debian Netinstall 3.1 R2 

Please use newer debian-installer such as version "Beta 3"

> http://cdimage.debian.org/debian-cd/3.1_r2/i386/iso-cd/debian-31r2-i386-netinst.iso

http://cdimage.debian.org/cdimage/etch_di_beta3/i386/iso-cd/debian-testing-i386-netinst.iso

> Disk: SATA 80GB 7200RPM
 <snip/>
> 0000:00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controllers cc=IDE (rev 01)
 <snip/>
> --Knoppix 2006.0601 and Ubuntu 6.06.1 (64-bit) booted OK and detected all HW.
> Sarge may just need a more recent kernel - I will try Debian Unstable.

"Beta 3" has a new kernel.

See also http://wiki.debian.org/DebianInstaller/SataAtapiHowto
and let us known it works for you.


Cheers
Geert Stappers



Information forwarded to debian-bugs-dist@lists.debian.org, Debian Install Team <debian-boot@lists.debian.org>:
Bug#385233; Package installation-reports. Full text and rfc822 format available.

Acknowledgement sent to Dave Bechtel <kingneutron@yahoo.com>:
Extra info received and forwarded to list. Copy sent to Debian Install Team <debian-boot@lists.debian.org>. Full text and rfc822 format available.

Message #15 received at 385233@bugs.debian.org (full text, mbox):

From: Dave Bechtel <kingneutron@yahoo.com>
To: 385233@bugs.debian.org
Subject: Re: Bug#385233: Debian Netinstall 3.1r2 cannot detect cdrom on Intel D945GNT motherboard
Date: Wed, 30 Aug 2006 19:32:42 -0700 (PDT)
Thanks. :)  I used the Testing (etch) nightly snapshot and it worked OK.

However, there is a minor annoyance that should be addressed before the next
Stable release.  When selecting Reiserfs for root partition, /etc/fstab gets
created with the "notail" mount option even when it is not selected during
install.  Noatime is fine and desired (and was selected) but notail on a
Reiser v3 filesystem is a waste of space due to no tail-packing.

Also, the Ethernet device detection order could use some work; eth0 should be
the motherboard Intel 1000 (it showed up as eth2 with DHCP); there is also a
PCI card using the 8139too driver, which got detected as eth0.  There is no
3rd ethernet device.

Referring back to lspci:
[[
02:00.0 Ethernet controller: Intel Corporation 82573V Gigabit Ethernet
Controller (Copper) (rev 03)
07:02.0 Ethernet controller: D-Link System Inc RTL8139 Ethernet (rev 10)
]]

The motherboard Ethernet device is 1st.

According to dmesg:
[[
ieee1394: Initialized config rom entry `ip1394'
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt 0000:07:02.0[A] -> GSI 18 (level, low) -> IRQ 185
eth0: RealTek RTL8139 at 0x1000, 00:40:05:39:09:ef, IRQ 185
eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
.
.
.
hdb: cache flushes supported
 hdb: hdb2
e1000: 0000:02:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1)
00:16:76:4b:7f:b0
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI Interrupt 0000:07:05.0[A] -> GSI 17 (level, low) -> IRQ 177
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 74
PCI: Setting latency timer of device 0000:00:1d.0 to 64
.
.
.
JFS: nTxBlock = 8192, nTxLock = 65536
i8xx TCO timer: heartbeat value must be 2<heartbeat<39, using 30
i8xx TCO timer: initialized (0x0460). heartbeat=30 sec (nowayout=0)
e1000: eth2: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
eth2: no IPv6 routers present
]]

Thanks for the links.

--- Geert Stappers <stappers@stappers.nl> wrote:

> On Tue, Aug 29, 2006 at 04:29:29PM -0700, Dave Bechtel wrote:
> > Package: installation-reports
> > 
> > Boot method:  CD
> > Image version:  April 2006,
> > Debian FTP site - Debian Netinstall 3.1 R2 
> 
> Please use newer debian-installer such as version "Beta 3"
> 
> >
>
http://cdimage.debian.org/debian-cd/3.1_r2/i386/iso-cd/debian-31r2-i386-netinst.iso
> 
>
http://cdimage.debian.org/cdimage/etch_di_beta3/i386/iso-cd/debian-testing-i386-netinst.iso
> 
> > Disk: SATA 80GB 7200RPM
>  <snip/>
> > 0000:00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family)
> Serial ATA Storage Controllers cc=IDE (rev 01)
>  <snip/>
> > --Knoppix 2006.0601 and Ubuntu 6.06.1 (64-bit) booted OK and detected all
> HW.
> > Sarge may just need a more recent kernel - I will try Debian Unstable.
> 
> "Beta 3" has a new kernel.
> 
> See also http://wiki.debian.org/DebianInstaller/SataAtapiHowto
> and let us known it works for you.
> 
> 
> Cheers
> Geert Stappers
> 



__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 



Reply sent to stappers@stappers.nl (Geert Stappers):
You have taken responsibility. Full text and rfc822 format available.

Notification sent to Dave Bechtel <kingneutron@yahoo.com>:
Bug acknowledged by developer. Full text and rfc822 format available.

Message #20 received at 385233-done@bugs.debian.org (full text, mbox):

From: stappers@stappers.nl (Geert Stappers)
To: Dave Bechtel <kingneutron@yahoo.com>, 385233-done@bugs.debian.org
Subject: Re: Bug#385233: Debian Netinstall 3.1r2 cannot detect cdrom on Intel D945GNT motherboard
Date: Thu, 31 Aug 2006 22:30:18 +0200
On Wed, Aug 30, 2006 at 07:32:42PM -0700, Dave Bechtel wrote:
> Thanks. :)  I used the Testing (etch) nightly snapshot and it worked OK.

Okay! That is good to known / hear / read.

Have fun with you Debian GNU/Linux computer system.

> However, there is a minor annoyance that should be addressed before the next
> Stable release. 

Please file new bugreports for it. Do this with writing an E-mail to
submit@bugs.debian.org with a content like

|Package: debian-installer
|Version: nightly snapshot of $DATE     # or better 
|Severity: wishlist
|
|When selecting Reiserfs for root partition, /etc/fstab gets
|created with the "notail" mount option even when it is not selected during
|install.  Noatime is fine and desired (and was selected) but notail on a
|Reiser v3 filesystem is a waste of space due to no tail-packing.

Add also a nice subject to the E-mail.
More information about the Debian Bug Tracking Sytem is
at http://www.nl.debian.org/Bugs/Reporting it even starts with

  Please don't report multiple unrelated bugs - especially ones in
  different packages - in a single bug report. It makes our lives much
  easier if you send separate reports.

So try it with:
> Also, the Ethernet device detection order could use some work; eth0 should be
> the motherboard Intel 1000 (it showed up as eth2 with DHCP); there is also a
> PCI card using the 8139too driver, which got detected as eth0.  There is no
> 3rd ethernet device.
> 
> Referring back to lspci:
> [[
> 02:00.0 Ethernet controller: Intel Corporation 82573V Gigabit Ethernet Controller (Copper) (rev 03)
> 07:02.0 Ethernet controller: D-Link System Inc RTL8139 Ethernet (rev 10)
> ]]
> 
> The motherboard Ethernet device is 1st.
> 
> [[ dmesg output ]]
> 
> Thanks for the links.

Thank you for considering the next time to reply below the text.
Visit http://bugs.debian.org/385233 for good and bad examples of quoting.


Cheers
Geert Stappers



Information forwarded to debian-bugs-dist@lists.debian.org, Debian Install Team <debian-boot@lists.debian.org>:
Bug#385233; Package installation-reports. Full text and rfc822 format available.

Acknowledgement sent to Dave Bechtel <kingneutron@yahoo.com>:
Extra info received and forwarded to list. Copy sent to Debian Install Team <debian-boot@lists.debian.org>. Full text and rfc822 format available.

Message #25 received at 385233@bugs.debian.org (full text, mbox):

From: Dave Bechtel <kingneutron@yahoo.com>
To: Geert Stappers <stappers@stappers.nl>
Subject: Re: Bug#385233: Debian Netinstall 3.1r2 cannot detect cdrom on Intel D945GNT motherboard
Date: Thu, 31 Aug 2006 19:17:42 -0700 (PDT)
Unfortunately I had to scrap the install due to continuous errors that were
popping up with the RTC clock, and inability of Vmware Server Win32 client to
access the virtual-machine console.

I will try to file bugs against these issues.  BTW, AFAICanTell, my DVD burner
is IDE instead of SATA.

>From my standpoint, it would be beneficial for the distro to concentrate on
getting Etch working flawlessly with Vmware out of the box; I highly recommend
Sarge as a minimal Linux host, but its kernel is having trouble with newer
hardware.

( I can volunteer for testing if you like; still have some free space on the
host HD. )

See:
http://www.vmware.com/community/thread.jspa?messageID=424107&#424107

My best Sarge success story to date involves an ancient dual-200MHz rackmount
SCSI server running 2.4 kernel with 768MB RAM and Vmware Server(!).  Box
refuses to boot any 2.6 kernel, but vmware can run a 2.6 guest.  With Sarge,
it runs well with 2.4.27-3-686-smp and Vmware Server response is good with a
single Win2kpro guest. :)

Keep up the good work, good ol' Sarge helped to save that server from being
junked.  Debian should always be a good alternative for lower-end systems that
other distros won't boot or install on - low memory systems especially.  As I
said in the vmware posting above, I ain't worried about no fancy GUI installer
- I just want it to Work. ;-)

--- Geert Stappers <stappers@stappers.nl> wrote:

> On Wed, Aug 30, 2006 at 07:32:42PM -0700, Dave Bechtel wrote:
> > Thanks. :)  I used the Testing (etch) nightly snapshot and it worked OK.
> 
> Okay! That is good to known / hear / read.
> 
> Have fun with you Debian GNU/Linux computer system.
> 
> > However, there is a minor annoyance that should be addressed before the
> next
> > Stable release. 
> 
> Please file new bugreports for it. Do this with writing an E-mail to
> submit@bugs.debian.org with a content like
> 
> |Package: debian-installer
> |Version: nightly snapshot of $DATE     # or better 
> |Severity: wishlist
> |
> |When selecting Reiserfs for root partition, /etc/fstab gets
> |created with the "notail" mount option even when it is not selected during
> |install.  Noatime is fine and desired (and was selected) but notail on a
> |Reiser v3 filesystem is a waste of space due to no tail-packing.
> 
> Add also a nice subject to the E-mail.
> More information about the Debian Bug Tracking Sytem is
> at http://www.nl.debian.org/Bugs/Reporting it even starts with
> 
>   Please don't report multiple unrelated bugs - especially ones in
>   different packages - in a single bug report. It makes our lives much
>   easier if you send separate reports.
> 
> So try it with:
> > Also, the Ethernet device detection order could use some work; eth0 should
> be
> > the motherboard Intel 1000 (it showed up as eth2 with DHCP); there is also
> a
> > PCI card using the 8139too driver, which got detected as eth0.  There is
> no
> > 3rd ethernet device.
> > 
> > Referring back to lspci:
> > [[
> > 02:00.0 Ethernet controller: Intel Corporation 82573V Gigabit Ethernet
> Controller (Copper) (rev 03)
> > 07:02.0 Ethernet controller: D-Link System Inc RTL8139 Ethernet (rev 10)
> > ]]
> > 
> > The motherboard Ethernet device is 1st.
> > 
> > [[ dmesg output ]]
> > 
> > Thanks for the links.
> 
> Thank you for considering the next time to reply below the text.
> Visit http://bugs.debian.org/385233 for good and bad examples of quoting.
> 
> 
> Cheers
> Geert Stappers
> 


Contents above ThisLine (C)ThisYear KingNeutron Ltd.
===== Check out KNOPPIX Debian/Linux 700MB Live CD:
===== http://www.knopper.net/knoppix/index-old-en.html
"C00K13 M0N573R 0WNZ J00!! PH34R C00K13 M0N573R 4ND 0SC4R 4ND
3LM0 4ND 5NUFFL3UP46U5 4ND 7H3 31337 535AM3 57R337 CR3W!!"
.dotgoeshere.

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 



Bug archived. Request was from Debbugs Internal Request <owner@bugs.debian.org> to internal_control@bugs.debian.org. (Sun, 17 Jun 2007 23:58:29 GMT) Full text and rfc822 format available.

Send a report that this bug log contains spam.


Debian bug tracking system administrator <owner@bugs.debian.org>. Last modified: Fri Apr 18 10:38:16 2014; Machine Name: buxtehude.debian.org

Debian Bug tracking system
Copyright (C) 1999 Darren O. Benham, 1997,2003 nCipher Corporation Ltd, 1994-97 Ian Jackson.