From: Norman Ramsey <nr@eecs.harvard.edu>
To: Debian Bug Tracking System <submit@bugs.debian.org>
Subject: wishlist: striped logical volume with LVM
Date: Thu, 24 Aug 2006 17:03:25 -0400
Package: partman-lvm; Maintainer for partman-lvm is Debian Install System Team <debian-boot@lists.debian.org>;
Reported by: Norman Ramsey <nr@eecs.harvard.edu>
Date: Thu, 24 Aug 2006 21:19:00 UTC
Severity: wishlist
Reply or subscribe to this bug.
View this report as an mbox folder, status mbox, maintainer mbox
Report forwarded to debian-bugs-dist@lists.debian.org, Debian Install Team <debian-boot@lists.debian.org>:
Bug#384521; Package installation-reports.
(full text, mbox, link).
Acknowledgement sent to Norman Ramsey <nr@eecs.harvard.edu>:
New Bug report received and forwarded. Copy sent to Debian Install Team <debian-boot@lists.debian.org>.
(full text, mbox, link).
Message #5 received at submit@bugs.debian.org (full text, mbox, reply):
Package: installation-reports
Version: 2.17
Severity: wishlist
Nice successful install---*except* I wanted my root filesystem on a
logical volume striped across two physical drives. I managed this by
getting into a shell at the end of the install, building a suitable
logical volume, and copying the root FS at the time. Then I had to
edit /etc/fstab and /boot/grub/menu.lst. In all, I'd have been
happier if the installer had offered me striping as an option.
(In general I found partman a bit confusing.)
Otherwise, it was the greatest install ever! (And I've done a lot.)
(One other suggestion: installation found 2 ethernet devices and I
didn't know which one to use. Probing for link sense on both would
have been pleasant.)
-- Package-specific info:
Boot method: CD
Image version: testing netinst CD as of 04 August 2006 (md5sum 27ef6d9ae1670f66d908af8c1fb6d7f5)
Date: <Date and time of the install>
Machine: homebuilt using ASUS A8N-VM CSM motherboard
Partitions: <df -Tl will do; the raw partition table is preferred>
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [ ]
Detect network card: [ ]
Configure network: [ ]
Detect CD: [ ]
Load installer modules: [ ]
Detect hard drives: [ ]
Partition hard drives: [ ]
Install base system: [ ]
Clock/timezone setup: [ ]
User/password setup: [ ]
Install tasks: [ ]
Install boot loader: [ ]
Overall install: [ ]
Comments/Problems:
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report.
Once you have filled out this report, mail it to submit@bugs.debian.org.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="3.1 (installer build 20060806)"
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux labrador 2.6.16-2-486 #1 Sat Jul 15 21:23:01 UTC 2006 i686 unknown
lspci -v -t: -[0000:00]-+-00.0 nVidia Corporation C51 Host Bridge
lspci -v -t: +-00.1 nVidia Corporation C51 Memory Controller 0
lspci -v -t: +-00.2 nVidia Corporation C51 Memory Controller 1
lspci -v -t: +-00.3 nVidia Corporation C51 Memory Controller 5
lspci -v -t: +-00.4 nVidia Corporation C51 Memory Controller 4
lspci -v -t: +-00.5 nVidia Corporation C51 Host Bridge
lspci -v -t: +-00.6 nVidia Corporation C51 Memory Controller 3
lspci -v -t: +-00.7 nVidia Corporation C51 Memory Controller 2
lspci -v -t: +-02.0-[0000:01]--
lspci -v -t: +-03.0-[0000:02]--
lspci -v -t: +-04.0-[0000:03]--
lspci -v -t: +-05.0 nVidia Corporation C51PV [GeForce 6150]
lspci -v -t: +-09.0 nVidia Corporation MCP51 Host Bridge
lspci -v -t: +-0a.0 nVidia Corporation MCP51 LPC Bridge
lspci -v -t: +-0a.1 nVidia Corporation MCP51 SMBus
lspci -v -t: +-0b.0 nVidia Corporation MCP51 USB Controller
lspci -v -t: +-0b.1 nVidia Corporation MCP51 USB Controller
lspci -v -t: +-0d.0 nVidia Corporation MCP51 IDE
lspci -v -t: +-0e.0 nVidia Corporation MCP51 Serial ATA Controller
lspci -v -t: +-0f.0 nVidia Corporation MCP51 Serial ATA Controller
lspci -v -t: +-10.0-[0000:04]----05.0 VIA Technologies, Inc. IEEE 1394 Host Controller
lspci -v -t: +-10.1 nVidia Corporation MCP51 High Definition Audio
lspci -v -t: +-14.0 nVidia Corporation MCP51 Ethernet Controller
lspci -v -t: +-18.0 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
lspci -v -t: +-18.1 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
lspci -v -t: +-18.2 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
lspci -v -t: \-18.3 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
lspci -n: 00:00.0 0500: 10de:02f0 (rev a2)
lspci -n: 00:00.1 0500: 10de:02fa (rev a2)
lspci -n: 00:00.2 0500: 10de:02fe (rev a2)
lspci -n: 00:00.3 0500: 10de:02f8 (rev a2)
lspci -n: 00:00.4 0500: 10de:02f9 (rev a2)
lspci -n: 00:00.5 0500: 10de:02ff (rev a2)
lspci -n: 00:00.6 0500: 10de:027f (rev a2)
lspci -n: 00:00.7 0500: 10de:027e (rev a2)
lspci -n: 00:02.0 0604: 10de:02fc (rev a1)
lspci -n: 00:03.0 0604: 10de:02fd (rev a1)
lspci -n: 00:04.0 0604: 10de:02fb (rev a1)
lspci -n: 00:05.0 0300: 10de:0240 (rev a2)
lspci -n: 00:09.0 0500: 10de:0270 (rev a2)
lspci -n: 00:0a.0 0601: 10de:0260 (rev a2)
lspci -n: 00:0a.1 0c05: 10de:0264 (rev a2)
lspci -n: 00:0b.0 0c03: 10de:026d (rev a2)
lspci -n: 00:0b.1 0c03: 10de:026e (rev a2)
lspci -n: 00:0d.0 0101: 10de:0265 (rev a1)
lspci -n: 00:0e.0 0101: 10de:0266 (rev a1)
lspci -n: 00:0f.0 0101: 10de:0267 (rev a1)
lspci -n: 00:10.0 0604: 10de:026f (rev a2)
lspci -n: 00:10.1 0403: 10de:026c (rev a2)
lspci -n: 00:14.0 0680: 10de:0269 (rev a1)
lspci -n: 00:18.0 0600: 1022:1100
lspci -n: 00:18.1 0600: 1022:1101
lspci -n: 00:18.2 0600: 1022:1102
lspci -n: 00:18.3 0600: 1022:1103
lspci -n: 04:05.0 0c00: 1106:3044 (rev 80)
lspci -v: 00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
lspci -v: Subsystem: ASUSTeK Computer Inc. Unknown device 81cd
lspci -v: Flags: bus master, 66MHz, fast devsel, latency 0
lspci -v: Capabilities: [44] HyperTransport: Slave or Primary Interface
lspci -v: Capabilities: [e0] HyperTransport: MSI Mapping
lspci -v:
lspci -v: 00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
lspci -v: Subsystem: ASUSTeK Computer Inc. Unknown device 81cd
lspci -v: Flags: 66MHz, fast devsel
lspci -v:
lspci -v: 00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
lspci -v: Subsystem: ASUSTeK Computer Inc. Unknown device 81cd
lspci -v: Flags: 66MHz, fast devsel
lspci -v:
lspci -v: 00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
lspci -v: Subsystem: ASUSTeK Computer Inc. Unknown device 81cd
lspci -v: Flags: 66MHz, fast devsel
lspci -v:
lspci -v: 00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2)
lspci -v: Subsystem: ASUSTeK Computer Inc. Unknown device 81cd
lspci -v: Flags: bus master, 66MHz, fast devsel, latency 0
lspci -v:
lspci -v: 00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
lspci -v: Subsystem: ASUSTeK Computer Inc. Unknown device 81cd
lspci -v: Flags: bus master, 66MHz, fast devsel, latency 0
lspci -v: Capabilities: [44] #00 [00fe]
lspci -v: Capabilities: [fc] #00 [0000]
lspci -v:
lspci -v: 00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2)
lspci -v: Subsystem: ASUSTeK Computer Inc. Unknown device 81cd
lspci -v: Flags: 66MHz, fast devsel
lspci -v:
lspci -v: 00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2)
lspci -v: Subsystem: ASUSTeK Computer Inc. Unknown device 81cd
lspci -v: Flags: 66MHz, fast devsel
lspci -v:
lspci -v: 00:02.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
lspci -v: Capabilities: [40] #0d [0000]
lspci -v: Capabilities: [48] Power Management version 2
lspci -v: Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable+
lspci -v: Capabilities: [60] HyperTransport: MSI Mapping
lspci -v: Capabilities: [80] Express Root Port (Slot+) IRQ 0
lspci -v: Capabilities: [100] Virtual Channel
lspci -v:
lspci -v: 00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
lspci -v: Capabilities: [40] #0d [0000]
lspci -v: Capabilities: [48] Power Management version 2
lspci -v: Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable+
lspci -v: Capabilities: [60] HyperTransport: MSI Mapping
lspci -v: Capabilities: [80] Express Root Port (Slot+) IRQ 0
lspci -v: Capabilities: [100] Virtual Channel
lspci -v:
lspci -v: 00:04.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
lspci -v: Capabilities: [40] #0d [0000]
lspci -v: Capabilities: [48] Power Management version 2
lspci -v: Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable+
lspci -v: Capabilities: [60] HyperTransport: MSI Mapping
lspci -v: Capabilities: [80] Express Root Port (Slot+) IRQ 0
lspci -v: Capabilities: [100] Virtual Channel
lspci -v:
lspci -v: 00:05.0 VGA compatible controller: nVidia Corporation C51PV [GeForce 6150] (rev a2)
lspci -v: Subsystem: ASUSTeK Computer Inc. Unknown device 81cd
lspci -v: Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 11
lspci -v: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
lspci -v: Memory at d0000000 (64-bit, prefetchable) [size=256M]
lspci -v: Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
lspci -v: Expansion ROM at febe0000 [disabled] [size=128K]
lspci -v: Capabilities: [48] Power Management version 2
lspci -v: Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
lspci -v:
lspci -v: 00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2)
lspci -v: Subsystem: ASUSTeK Computer Inc. Unknown device 81bc
lspci -v: Flags: bus master, 66MHz, fast devsel, latency 0
lspci -v: Capabilities: [44] HyperTransport: Slave or Primary Interface
lspci -v: Capabilities: [e0] HyperTransport: MSI Mapping
lspci -v:
lspci -v: 00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a2)
lspci -v: Subsystem: ASUSTeK Computer Inc. Unknown device 81bc
lspci -v: Flags: bus master, 66MHz, fast devsel, latency 0
lspci -v:
lspci -v: 00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a2)
lspci -v: Subsystem: ASUSTeK Computer Inc. Unknown device 81bc
lspci -v: Flags: 66MHz, fast devsel, IRQ 5
lspci -v: I/O ports at 0600 [size=64]
lspci -v: I/O ports at 0700 [size=64]
lspci -v: Capabilities: [44] Power Management version 2
lspci -v:
lspci -v: 00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a2) (prog-if 10)
lspci -v: Subsystem: ASUSTeK Computer Inc. Unknown device 81bc
lspci -v: Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 233
lspci -v: Memory at febde000 (32-bit, non-prefetchable) [size=4K]
lspci -v: Capabilities: [44] Power Management version 2
lspci -v:
lspci -v: 00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a2) (prog-if 20)
lspci -v: Subsystem: ASUSTeK Computer Inc. Unknown device 81bc
lspci -v: Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 50
lspci -v: Memory at febdfc00 (32-bit, non-prefetchable) [size=256]
lspci -v: Capabilities: [44] Debug port
lspci -v: Capabilities: [80] Power Management version 2
lspci -v:
lspci -v: 00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev a1) (prog-if 8a [Master SecP PriP])
lspci -v: Subsystem: ASUSTeK Computer Inc. Unknown device 81bc
lspci -v: Flags: bus master, 66MHz, fast devsel, latency 0
lspci -v: I/O ports at ffa0 [size=16]
lspci -v: Capabilities: [44] Power Management version 2
lspci -v:
lspci -v: 00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1) (prog-if 85 [Master SecO PriO])
lspci -v: Subsystem: ASUSTeK Computer Inc. Unknown device 81bc
lspci -v: Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 217
lspci -v: I/O ports at e800 [size=8]
lspci -v: I/O ports at e480 [size=4]
lspci -v: I/O ports at e400 [size=8]
lspci -v: I/O ports at e080 [size=4]
lspci -v: I/O ports at e000 [size=16]
lspci -v: Memory at febdd000 (32-bit, non-prefetchable) [size=4K]
lspci -v: Capabilities: [44] Power Management version 2
lspci -v: Capabilities: [b0] Message Signalled Interrupts: 64bit+ Queue=0/2 Enable-
lspci -v: Capabilities: [cc] HyperTransport: MSI Mapping
lspci -v:
lspci -v: 00:0f.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1) (prog-if 85 [Master SecO PriO])
lspci -v: Subsystem: ASUSTeK Computer Inc. Unknown device 81bc
lspci -v: Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 225
lspci -v: I/O ports at dc00 [size=8]
lspci -v: I/O ports at d880 [size=4]
lspci -v: I/O ports at d800 [size=8]
lspci -v: I/O ports at d480 [size=4]
lspci -v: I/O ports at d400 [size=16]
lspci -v: Memory at febdc000 (32-bit, non-prefetchable) [size=4K]
lspci -v: Capabilities: [44] Power Management version 2
lspci -v: Capabilities: [b0] Message Signalled Interrupts: 64bit+ Queue=0/2 Enable-
lspci -v: Capabilities: [cc] HyperTransport: MSI Mapping
lspci -v:
lspci -v: 00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2) (prog-if 01)
lspci -v: Flags: bus master, 66MHz, fast devsel, latency 0
lspci -v: Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
lspci -v: I/O behind bridge: 0000c000-0000cfff
lspci -v: Memory behind bridge: faa00000-faafffff
lspci -v: Capabilities: [b8] #0d [0000]
lspci -v: Capabilities: [8c] HyperTransport: MSI Mapping
lspci -v:
lspci -v: 00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2)
lspci -v: Subsystem: nVidia Corporation Unknown device cb84
lspci -v: Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 5
lspci -v: Memory at febd8000 (32-bit, non-prefetchable) [size=16K]
lspci -v: Capabilities: [44] Power Management version 2
lspci -v: Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
lspci -v: Capabilities: [6c] HyperTransport: MSI Mapping
lspci -v:
lspci -v: 00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a1)
lspci -v: Subsystem: ASUSTeK Computer Inc. Unknown device 8141
lspci -v: Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 217
lspci -v: Memory at febd7000 (32-bit, non-prefetchable) [size=4K]
lspci -v: I/O ports at d080 [size=8]
lspci -v: Capabilities: [44] Power Management version 2
lspci -v:
lspci -v: 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
lspci -v: Flags: fast devsel
lspci -v: Capabilities: [80] HyperTransport: Host or Secondary Interface
lspci -v:
lspci -v: 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
lspci -v: Flags: fast devsel
lspci -v:
lspci -v: 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
lspci -v: Flags: fast devsel
lspci -v:
lspci -v: 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
lspci -v: Flags: fast devsel
lspci -v:
lspci -v: 04:05.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) (prog-if 10)
lspci -v: Subsystem: ASUSTeK Computer Inc. Unknown device 808a
lspci -v: Flags: bus master, medium devsel, latency 64, IRQ 209
lspci -v: Memory at faaff800 (32-bit, non-prefetchable) [size=2K]
lspci -v: I/O ports at cc00 [size=128]
lspci -v: Capabilities: [50] Power Management version 2
lspci -v:
lspci -x: 00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
lspci -x: 00: de 10 f0 02 06 01 b0 00 a2 00 00 05 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 cd 81
lspci -x: 30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 00 00 00
lspci -x:
lspci -x: 00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
lspci -x: 00: de 10 fa 02 00 01 20 00 a2 00 00 05 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 cd 81
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
lspci -x: 00: de 10 fe 02 00 00 20 00 a2 00 00 05 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 cd 81
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
lspci -x: 00: de 10 f8 02 00 01 a0 00 a2 00 00 05 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 cd 81
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
lspci -x:
lspci -x: 00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2)
lspci -x: 00: de 10 f9 02 06 01 a0 00 a2 00 00 05 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 cd 81
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
lspci -x:
lspci -x: 00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
lspci -x: 00: de 10 ff 02 06 01 b0 00 a2 00 00 05 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 cd 81
lspci -x: 30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 00 00 00
lspci -x:
lspci -x: 00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2)
lspci -x: 00: de 10 7f 02 02 01 20 00 a2 00 00 05 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 cd 81
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2)
lspci -x: 00: de 10 7e 02 00 00 20 00 a2 00 00 05 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 cd 81
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 00:02.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
lspci -x: 00: de 10 fc 02 04 04 10 00 a1 00 04 06 10 00 01 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 01 01 00 f1 01 00 00
lspci -x: 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 02 00
lspci -x:
lspci -x: 00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
lspci -x: 00: de 10 fd 02 04 04 10 00 a1 00 04 06 10 00 01 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 02 02 00 f1 01 00 00
lspci -x: 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 02 00
lspci -x:
lspci -x: 00:04.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
lspci -x: 00: de 10 fb 02 04 04 10 00 a1 00 04 06 10 00 01 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 03 03 00 f1 01 00 00
lspci -x: 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 02 00
lspci -x:
lspci -x: 00:05.0 VGA compatible controller: nVidia Corporation C51PV [GeForce 6150] (rev a2)
lspci -x: 00: de 10 40 02 07 00 b0 00 a2 00 00 03 00 00 00 00
lspci -x: 10: 00 00 00 fd 0c 00 00 d0 00 00 00 00 04 00 00 fc
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 cd 81
lspci -x: 30: 00 00 be fe 48 00 00 00 00 00 00 00 0b 01 00 00
lspci -x:
lspci -x: 00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2)
lspci -x: 00: de 10 70 02 06 00 b0 00 a2 00 00 05 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 bc 81
lspci -x: 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a2)
lspci -x: 00: de 10 60 02 0f 00 a0 00 a2 00 01 06 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 bc 81
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a2)
lspci -x: 00: de 10 64 02 01 00 b0 00 a2 00 05 0c 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 01 06 00 00 01 07 00 00 00 00 00 00 43 10 bc 81
lspci -x: 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 00 00
lspci -x:
lspci -x: 00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a2)
lspci -x: 00: de 10 6d 02 07 00 b0 00 a2 10 03 0c 00 00 80 00
lspci -x: 10: 00 e0 bd fe 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 bc 81
lspci -x: 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 03 01
lspci -x:
lspci -x: 00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a2)
lspci -x: 00: de 10 6e 02 06 00 b0 00 a2 20 03 0c 00 00 80 00
lspci -x: 10: 00 fc bd fe 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 bc 81
lspci -x: 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 02 03 01
lspci -x:
lspci -x: 00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev a1)
lspci -x: 00: de 10 65 02 05 00 b0 00 a1 8a 01 01 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: a1 ff 00 00 00 00 00 00 00 00 00 00 43 10 bc 81
lspci -x: 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01
lspci -x:
lspci -x: 00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1)
lspci -x: 00: de 10 66 02 07 00 b0 00 a1 85 01 01 00 00 00 00
lspci -x: 10: 01 e8 00 00 81 e4 00 00 01 e4 00 00 81 e0 00 00
lspci -x: 20: 01 e0 00 00 00 d0 bd fe 00 00 00 00 43 10 bc 81
lspci -x: 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 03 01
lspci -x:
lspci -x: 00:0f.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1)
lspci -x: 00: de 10 67 02 07 00 b0 00 a1 85 01 01 00 00 00 00
lspci -x: 10: 01 dc 00 00 81 d8 00 00 01 d8 00 00 81 d4 00 00
lspci -x: 20: 01 d4 00 00 00 c0 bd fe 00 00 00 00 43 10 bc 81
lspci -x: 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 03 01
lspci -x:
lspci -x: 00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2)
lspci -x: 00: de 10 6f 02 07 00 b0 00 a2 01 04 06 00 00 81 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 04 04 40 c0 c0 80 02
lspci -x: 20: a0 fa a0 fa f0 ff 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 b8 00 00 00 00 00 00 00 00 00 02 02
lspci -x:
lspci -x: 00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2)
lspci -x: 00: de 10 6c 02 06 00 b0 00 a2 00 03 04 00 00 80 00
lspci -x: 10: 00 80 bd fe 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 de 10 84 cb
lspci -x: 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 02 02 05
lspci -x:
lspci -x: 00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a1)
lspci -x: 00: de 10 69 02 07 00 b0 00 a1 00 80 06 00 00 00 00
lspci -x: 10: 00 70 bd fe 81 d0 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 41 81
lspci -x: 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 01 14
lspci -x:
lspci -x: 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
lspci -x: 00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
lspci -x: 00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
lspci -x: 00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
lspci -x: 00: 22 10 03 11 00 00 00 00 00 00 00 06 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 04:05.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80)
lspci -x: 00: 06 11 44 30 17 01 10 02 80 10 00 0c 10 40 00 00
lspci -x: 10: 00 f8 af fa 01 cc 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 8a 80
lspci -x: 30: 00 00 00 00 50 00 00 00 00 00 00 00 05 01 00 20
lspci -x:
lsmod: Module Size Used by
lsmod: qnx4 10612 0
lsmod: ntfs 189580 0
lsmod: dm_mod 48180 4
lsmod: xfs 483476 0
lsmod: exportfs 5248 1 xfs
lsmod: reiserfs 218352 0
lsmod: jfs 158556 0
lsmod: ext3 115976 2
lsmod: jbd 46996 1 ext3
lsmod: vfat 11520 0
lsmod: fat 46876 1 vfat
lsmod: eth1394 18180 0
lsmod: forcedeth 20612 0
lsmod: nls_iso8859_1 4224 3
lsmod: rsrc_nonstatic 12160 0
lsmod: pcmcia_core 37392 1 rsrc_nonstatic
lsmod: sbp2 19588 0
lsmod: isofs 32192 0
lsmod: ide_disk 14976 0
lsmod: ide_generic 1408 0 [permanent]
lsmod: aec62xx 6784 0 [permanent]
lsmod: alim15x3 11024 0 [permanent]
lsmod: atiixp 5392 0 [permanent]
lsmod: cmd64x 10012 0 [permanent]
lsmod: cs5520 4608 0 [permanent]
lsmod: cs5530 4864 0 [permanent]
lsmod: cs5535 4224 0 [permanent]
lsmod: cy82c693 4356 0 [permanent]
lsmod: hpt34x 4992 0 [permanent]
lsmod: it821x 7812 0 [permanent]
lsmod: ns87415 4268 0 [permanent]
lsmod: opti621 4100 0 [permanent]
lsmod: pdc202xx_new 8064 0 [permanent]
lsmod: pdc202xx_old 9600 0 [permanent]
lsmod: piix 9092 0 [permanent]
lsmod: rz1000 2688 0 [permanent]
lsmod: sc1200 6656 0 [permanent]
lsmod: serverworks 8328 0 [permanent]
lsmod: siimage 11008 0 [permanent]
lsmod: sis5513 12300 0 [permanent]
lsmod: slc90e66 5120 0 [permanent]
lsmod: triflex 3712 0 [permanent]
lsmod: trm290 4100 0 [permanent]
lsmod: via82cxxx 8196 0 [permanent]
lsmod: floppy 55852 0
lsmod: usb_storage 69696 0
lsmod: vga16fb 11528 2
lsmod: vgastate 7680 1 vga16fb
lsmod: usbserial 28364 0
lsmod: usbhid 32352 0
lsmod: usbkbd 6656 0
lsmod: thermal 13192 0
lsmod: processor 21952 1 thermal
lsmod: fan 4740 0
lsmod: ide_cd 35488 0
lsmod: cdrom 32176 1 ide_cd
lsmod: sd_mod 16528 7
lsmod: amd74xx 12956 0 [permanent]
lsmod: generic 4356 0 [permanent]
lsmod: ide_core 111280 30 ide_disk,ide_generic,aec62xx,alim15x3,atiixp,cmd64x,cs5520,cs5530,cs5535,cy82c693,hpt34x,it821x,ns87415,opti621,pdc202xx_new,pdc202xx_old,piix,rz1000,sc1200,serverworks,siimage,sis5513,slc90e66,triflex,trm290,via82cxxx,usb_storage,ide_cd,amd74xx,generic
lsmod: ehci_hcd 27144 0
lsmod: ohci_hcd 17412 0
lsmod: usbcore 111008 7 usb_storage,usbserial,usbhid,usbkbd,ehci_hcd,ohci_hcd
lsmod: sata_nv 9092 5
lsmod: libata 52752 1 sata_nv
lsmod: scsi_mod 122444 4 sbp2,usb_storage,sd_mod,libata
lsmod: ohci1394 29488 0
lsmod: ieee1394 85816 3 eth1394,sbp2,ohci1394
lsmod: parport_pc 31728 0
lsmod: parport 31944 1 parport_pc
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 583056 432 582624 0% /dev
df: tmpfs 583056 432 582624 0% /dev
df: tmpfs 583056 432 582624 0% /.dev
df: /dev/mapper/Debian-unstripe--root 5160576 612472 4285960 13% /target
df: /dev/scsi/host0/bus0/target0/lun0/part1 233335 10959 209928 5% /target/boot
df: /dev/Debian/root 103212320 673224 97296216 1% /mnt
free: total used free shared buffers
free: Mem: 1166112 1099428 66684 0 26608
free: Swap: 6835576 420 6835156
free: Total: 8001688 1099848 6901840
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 34: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 35: cardctl: not found
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : AuthenticAMD
/proc/cpuinfo: cpu family : 15
/proc/cpuinfo: model : 35
/proc/cpuinfo: model name : AMD Athlon(tm) 64 FX-60 Dual Core Processor
/proc/cpuinfo: stepping : 2
/proc/cpuinfo: cpu MHz : 2612.262
/proc/cpuinfo: cache size : 1024 KB
/proc/cpuinfo: fdiv_bug : no
/proc/cpuinfo: hlt_bug : no
/proc/cpuinfo: f00f_bug : no
/proc/cpuinfo: coma_bug : no
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 1
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow pni lahf_lm cmp_legacy ts fid vid ttp
/proc/cpuinfo: bogomips : 5238.52
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-006f : keyboard
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 01f0-01f7 : ide0
/proc/ioports: 0290-0297 : pnp 00:0c
/proc/ioports: 0378-037a : parport0
/proc/ioports: 037b-037f : parport0
/proc/ioports: 03c0-03df : vga+
/proc/ioports: 03f6-03f6 : ide0
/proc/ioports: 03f8-03ff : serial
/proc/ioports: 0500-0503 : PM1a_EVT_BLK
/proc/ioports: 0504-0505 : PM1a_CNT_BLK
/proc/ioports: 0508-050b : PM_TMR
/proc/ioports: 0520-0527 : GPE0_BLK
/proc/ioports: 0600-063f : 0000:00:0a.1
/proc/ioports: 0700-073f : 0000:00:0a.1
/proc/ioports: 0778-077a : parport0
/proc/ioports: 2000-207f : motherboard
/proc/ioports: 2080-20ff : motherboard
/proc/ioports: 5010-5015 : ACPI CPU throttle
/proc/ioports: c000-cfff : PCI Bus #04
/proc/ioports: cc00-cc7f : 0000:04:05.0
/proc/ioports: d080-d087 : 0000:00:14.0
/proc/ioports: d080-d087 : forcedeth
/proc/ioports: d400-d40f : 0000:00:0f.0
/proc/ioports: d400-d40f : sata_nv
/proc/ioports: d480-d483 : 0000:00:0f.0
/proc/ioports: d480-d483 : sata_nv
/proc/ioports: d800-d807 : 0000:00:0f.0
/proc/ioports: d800-d807 : sata_nv
/proc/ioports: d880-d883 : 0000:00:0f.0
/proc/ioports: d880-d883 : sata_nv
/proc/ioports: dc00-dc07 : 0000:00:0f.0
/proc/ioports: dc00-dc07 : sata_nv
/proc/ioports: e000-e00f : 0000:00:0e.0
/proc/ioports: e000-e00f : sata_nv
/proc/ioports: e080-e083 : 0000:00:0e.0
/proc/ioports: e080-e083 : sata_nv
/proc/ioports: e400-e407 : 0000:00:0e.0
/proc/ioports: e400-e407 : sata_nv
/proc/ioports: e480-e483 : 0000:00:0e.0
/proc/ioports: e480-e483 : sata_nv
/proc/ioports: e800-e807 : 0000:00:0e.0
/proc/ioports: e800-e807 : sata_nv
/proc/ioports: ffa0-ffaf : 0000:00:0d.0
/proc/ioports: ffa0-ffa7 : ide0
/proc/ioports: ffa8-ffaf : ide1
/proc/iomem: 00000000-0009fbff : System RAM
/proc/iomem: 00000000-00000000 : Crash kernel
/proc/iomem: 0009fc00-0009ffff : reserved
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000cebff : Video ROM
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-7bfbffff : System RAM
/proc/iomem: 00100000-00273102 : Kernel code
/proc/iomem: 00273103-00301c23 : Kernel data
/proc/iomem: 7bfc0000-7bfcdfff : ACPI Tables
/proc/iomem: 7bfce000-7bfeffff : ACPI Non-volatile Storage
/proc/iomem: 7bff0000-7bffffff : reserved
/proc/iomem: d0000000-dfffffff : 0000:00:05.0
/proc/iomem: faa00000-faafffff : PCI Bus #04
/proc/iomem: faaff800-faafffff : 0000:04:05.0
/proc/iomem: faaff800-faafffff : ohci1394
/proc/iomem: fc000000-fcffffff : 0000:00:05.0
/proc/iomem: fd000000-fdffffff : 0000:00:05.0
/proc/iomem: febd7000-febd7fff : 0000:00:14.0
/proc/iomem: febd7000-febd7fff : forcedeth
/proc/iomem: febd8000-febdbfff : 0000:00:10.1
/proc/iomem: febdc000-febdcfff : 0000:00:0f.0
/proc/iomem: febdc000-febdcfff : sata_nv
/proc/iomem: febdd000-febddfff : 0000:00:0e.0
/proc/iomem: febdd000-febddfff : sata_nv
/proc/iomem: febde000-febdefff : 0000:00:0b.0
/proc/iomem: febde000-febdefff : ohci_hcd
/proc/iomem: febdfc00-febdfcff : 0000:00:0b.1
/proc/iomem: febdfc00-febdfcff : ehci_hcd
/proc/iomem: febe0000-febfffff : 0000:00:05.0
/proc/iomem: fec00000-fec00fff : reserved
/proc/iomem: fee00000-feefffff : reserved
/proc/iomem: ff780000-ffffffff : reserved
/proc/interrupts: CPU0
/proc/interrupts: 0: 1343775 IO-APIC-edge timer
/proc/interrupts: 1: 5136 IO-APIC-edge i8042
/proc/interrupts: 7: 1 IO-APIC-edge parport0
/proc/interrupts: 9: 0 IO-APIC-level acpi
/proc/interrupts: 14: 1398 IO-APIC-edge ide0
/proc/interrupts: 50: 0 IO-APIC-level ehci_hcd:usb2
/proc/interrupts: 209: 2 IO-APIC-level ohci1394
/proc/interrupts: 217: 694472 IO-APIC-level libata, eth1
/proc/interrupts: 225: 0 IO-APIC-level libata
/proc/interrupts: 233: 0 IO-APIC-level ohci_hcd:usb1
/proc/interrupts: NMI: 0
/proc/interrupts: LOC: 1343746
/proc/interrupts: ERR: 0
/proc/interrupts: MIS: 0
/proc/meminfo: MemTotal: 1166112 kB
/proc/meminfo: MemFree: 66476 kB
/proc/meminfo: Buffers: 26608 kB
/proc/meminfo: Cached: 979252 kB
/proc/meminfo: SwapCached: 64 kB
/proc/meminfo: Active: 59916 kB
/proc/meminfo: Inactive: 959792 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 1166112 kB
/proc/meminfo: LowFree: 66476 kB
/proc/meminfo: SwapTotal: 6835576 kB
/proc/meminfo: SwapFree: 6835156 kB
/proc/meminfo: Dirty: 640 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: Mapped: 15668 kB
/proc/meminfo: Slab: 66260 kB
/proc/meminfo: CommitLimit: 7418632 kB
/proc/meminfo: Committed_AS: 17720 kB
/proc/meminfo: PageTables: 224 kB
/proc/meminfo: VmallocTotal: 122576 kB
/proc/meminfo: VmallocUsed: 11904 kB
/proc/meminfo: VmallocChunk: 109680 kB
/proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
/proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard"
/proc/bus/input/devices: P: Phys=isa0060/serio0/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=4 2000000 3802078 f840d001 f2ffffdf ffefffff ffffffff fffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
dmidecode: # dmidecode 2.8
dmidecode: SMBIOS 2.3 present.
dmidecode: 66 structures occupying 2172 bytes.
dmidecode: Table at 0x000F06D0.
dmidecode:
dmidecode: Handle 0x0000, DMI type 0, 24 bytes
dmidecode: BIOS Information
dmidecode: Vendor: American Megatrends Inc.
dmidecode: Version: 0702
dmidecode: Release Date: 01/17/2006
dmidecode: Address: 0xF0000
dmidecode: Runtime Size: 64 kB
dmidecode: ROM Size: 512 kB
dmidecode: Characteristics:
dmidecode: ISA is supported
dmidecode: PCI is supported
dmidecode: PNP is supported
dmidecode: APM is supported
dmidecode: BIOS is upgradeable
dmidecode: BIOS shadowing is allowed
dmidecode: ESCD support is available
dmidecode: Boot from CD is supported
dmidecode: Selectable boot is supported
dmidecode: BIOS ROM is socketed
dmidecode: EDD is supported
dmidecode: 5.25"/1.2 MB floppy services are supported (int 13h)
dmidecode: 3.5"/720 KB floppy services are supported (int 13h)
dmidecode: 3.5"/2.88 MB floppy services are supported (int 13h)
dmidecode: Print screen service is supported (int 5h)
dmidecode: 8042 keyboard services are supported (int 9h)
dmidecode: Serial services are supported (int 14h)
dmidecode: Printer services are supported (int 17h)
dmidecode: CGA/mono video services are supported (int 10h)
dmidecode: ACPI is supported
dmidecode: USB legacy is supported
dmidecode: LS-120 boot is supported
dmidecode: ATAPI Zip drive boot is supported
dmidecode: BIOS boot specification is supported
dmidecode: BIOS Revision: 8.12
dmidecode:
dmidecode: Handle 0x0001, DMI type 1, 27 bytes
dmidecode: System Information
dmidecode: Manufacturer: System manufacturer
dmidecode: Product Name: System Product Name
dmidecode: Version: System Version
dmidecode: Serial Number: System Serial Number
dmidecode: UUID: 58410094-74FE-D511-9C82-1982D118FE44
dmidecode: Wake-up Type: Power Switch
dmidecode: SKU Number: To Be Filled By O.E.M.
dmidecode: Family: To Be Filled By O.E.M.
dmidecode:
dmidecode: Handle 0x0002, DMI type 2, 15 bytes
dmidecode: Base Board Information
dmidecode: Manufacturer: ASUSTeK Computer INC.
dmidecode: Product Name: A8N-VM CSM
dmidecode: Version: Rev 1.xx
dmidecode: Serial Number: MB-1234567890
dmidecode: Asset Tag: To Be Filled By O.E.M.
dmidecode: Features:
dmidecode: Board is a hosting board
dmidecode: Board is replaceable
dmidecode: Location In Chassis: To Be Filled By O.E.M.
dmidecode: Chassis Handle: 0x0003
dmidecode: Type: Motherboard
dmidecode: Contained Object Handles: 0
dmidecode:
dmidecode: Handle 0x0003, DMI type 3, 21 bytes
dmidecode: Chassis Information
dmidecode: Manufacturer: Chassis Manufacture
dmidecode: Type: Desktop
dmidecode: Lock: Not Present
dmidecode: Version: Chassis Version
dmidecode: Serial Number: Chassis Serial Number
dmidecode: Asset Tag: Asset-1234567890
dmidecode: Boot-up State: Safe
dmidecode: Power Supply State: Safe
dmidecode: Thermal State: Safe
dmidecode: Security Status: None
dmidecode: OEM Information: 0x00000001
dmidecode: Heigth: Unspecified
dmidecode: Number Of Power Cords: 1
dmidecode: Contained Elements: 0
dmidecode:
dmidecode: Handle 0x0004, DMI type 4, 35 bytes
dmidecode: Processor Information
dmidecode: Socket Designation: CPU 1
dmidecode: Type: Central Processor
dmidecode: Family: Athlon 64
dmidecode: Manufacturer: AMD
dmidecode: ID: 32 0F 02 00 FF FB 8B 17
dmidecode: Signature: Extended Family 0, Model 3, Stepping 2
dmidecode: Flags:
dmidecode: FPU (Floating-point unit on-chip)
dmidecode: VME (Virtual mode extension)
dmidecode: DE (Debugging extension)
dmidecode: PSE (Page size extension)
dmidecode: TSC (Time stamp counter)
dmidecode: MSR (Model specific registers)
dmidecode: PAE (Physical address extension)
dmidecode: MCE (Machine check exception)
dmidecode: CX8 (CMPXCHG8 instruction supported)
dmidecode: APIC (On-chip APIC hardware supported)
dmidecode: SEP (Fast system call)
dmidecode: MTRR (Memory type range registers)
dmidecode: PGE (Page global enable)
dmidecode: MCA (Machine check architecture)
dmidecode: CMOV (Conditional move instruction supported)
dmidecode: PAT (Page attribute table)
dmidecode: PSE-36 (36-bit page size extension)
dmidecode: CLFSH (CLFLUSH instruction supported)
dmidecode: MMX (MMX technology supported)
dmidecode: FXSR (Fast floating-point save and restore)
dmidecode: SSE (Streaming SIMD extensions)
dmidecode: SSE2 (Streaming SIMD extensions 2)
dmidecode: HTT (Hyper-threading technology)
dmidecode: Version: AMD Athlon(tm) 64 FX-60 Dual Core Processor
dmidecode: Voltage: 1.4 V
dmidecode: External Clock: 200 MHz
dmidecode: Max Speed: 3400 MHz
dmidecode: Current Speed: 2600 MHz
dmidecode: Status: Populated, Enabled
dmidecode: Upgrade: <OUT OF SPEC>
dmidecode: L1 Cache Handle: 0x0005
dmidecode: L2 Cache Handle: 0x0006
dmidecode: L3 Cache Handle: 0x0007
dmidecode: Serial Number: To Be Filled By O.E.M.
dmidecode: Asset Tag: To Be Filled By O.E.M.
dmidecode: Part Number: To Be Filled By O.E.M.
dmidecode:
dmidecode: Handle 0x0005, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: L1-Cache
dmidecode: Configuration: Enabled, Not Socketed, Level 1
dmidecode: Operational Mode: Varies With Memory Address
dmidecode: Location: Internal
dmidecode: Installed Size: 128 KB
dmidecode: Maximum Size: 128 KB
dmidecode: Supported SRAM Types:
dmidecode: Pipeline Burst
dmidecode: Installed SRAM Type: Pipeline Burst
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Single-bit ECC
dmidecode: System Type: Data
dmidecode: Associativity: 4-way Set-associative
dmidecode:
dmidecode: Handle 0x0006, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: L2-Cache
dmidecode: Configuration: Enabled, Not Socketed, Level 2
dmidecode: Operational Mode: Varies With Memory Address
dmidecode: Location: Internal
dmidecode: Installed Size: 1024 KB
dmidecode: Maximum Size: 1024 KB
dmidecode: Supported SRAM Types:
dmidecode: Pipeline Burst
dmidecode: Installed SRAM Type: Pipeline Burst
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Single-bit ECC
dmidecode: System Type: Unified
dmidecode: Associativity: 4-way Set-associative
dmidecode:
dmidecode: Handle 0x0007, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: L3-Cache
dmidecode: Configuration: Disabled, Not Socketed, Level 3
dmidecode: Operational Mode: Unknown
dmidecode: Location: Internal
dmidecode: Installed Size: 0 KB
dmidecode: Maximum Size: 0 KB
dmidecode: Supported SRAM Types:
dmidecode: Unknown
dmidecode: Installed SRAM Type: Unknown
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Unknown
dmidecode: System Type: Unknown
dmidecode: Associativity: Unknown
dmidecode:
dmidecode: Handle 0x0008, DMI type 5, 24 bytes
dmidecode: Memory Controller Information
dmidecode: Error Detecting Method: 64-bit ECC
dmidecode: Error Correcting Capabilities:
dmidecode: None
dmidecode: Supported Interleave: One-way Interleave
dmidecode: Current Interleave: One-way Interleave
dmidecode: Maximum Memory Module Size: 4096 MB
dmidecode: Maximum Total Memory Size: 16384 MB
dmidecode: Supported Speeds:
dmidecode: 70 ns
dmidecode: 60 ns
dmidecode: Supported Memory Types:
dmidecode: DIMM
dmidecode: SDRAM
dmidecode: Memory Module Voltage: 3.3 V
dmidecode: Associated Memory Slots: 4
dmidecode: 0x0009
dmidecode: 0x000A
dmidecode: 0x000B
dmidecode: 0x000C
dmidecode: Enabled Error Correcting Capabilities:
dmidecode: None
dmidecode:
dmidecode: Handle 0x0009, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: DIMM0
dmidecode: Bank Connections: 0 5
dmidecode: Current Speed: 160 ns
dmidecode: Type: ECC DIMM
dmidecode: Installed Size: 1024 MB (Double-bank Connection)
dmidecode: Enabled Size: 1024 MB (Double-bank Connection)
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x000A, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: DIMM1
dmidecode: Bank Connections: 0 5
dmidecode: Current Speed: 162 ns
dmidecode: Type: ECC DIMM
dmidecode: Installed Size: 1024 MB (Double-bank Connection)
dmidecode: Enabled Size: 1024 MB (Double-bank Connection)
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x000B, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: DIMM2
dmidecode: Bank Connections: 1
dmidecode: Current Speed: 164 ns
dmidecode: Type: Unknown
dmidecode: Installed Size: Not Installed
dmidecode: Enabled Size: Not Installed
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x000C, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: DIMM3
dmidecode: Bank Connections: 1
dmidecode: Current Speed: 166 ns
dmidecode: Type: Unknown
dmidecode: Installed Size: Not Installed
dmidecode: Enabled Size: Not Installed
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x000D, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: PS2Mouse
dmidecode: External Connector Type: PS/2
dmidecode: Port Type: Mouse Port
dmidecode:
dmidecode: Handle 0x000E, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Keyboard
dmidecode: External Connector Type: PS/2
dmidecode: Port Type: Keyboard Port
dmidecode:
dmidecode: Handle 0x000F, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB1
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0010, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB2
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0011, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB3
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0012, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB4
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0013, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB5
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0014, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB6
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0015, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB7
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0016, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB8
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0017, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: LPT 1
dmidecode: External Connector Type: DB-25 male
dmidecode: Port Type: Parallel Port ECP/EPP
dmidecode:
dmidecode: Handle 0x0018, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: COM 1
dmidecode: External Connector Type: DB-9 male
dmidecode: Port Type: Serial Port 16550A Compatible
dmidecode:
dmidecode: Handle 0x0019, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: LAN
dmidecode: External Connector Type: RJ-45
dmidecode: Port Type: Network Port
dmidecode:
dmidecode: Handle 0x001A, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: 1394_0
dmidecode: External Connector Type: RJ-45
dmidecode: Port Type: Network Port
dmidecode:
dmidecode: Handle 0x001B, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: 1394_1
dmidecode: External Connector Type: RJ-45
dmidecode: Port Type: Network Port
dmidecode:
dmidecode: Handle 0x001C, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Audio Mic In
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x001D, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Audio Line In
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x001E, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Audio Line Out
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x001F, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: SPDIF_OUT1
dmidecode: External Connector Type: Other
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0020, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: TV_OUT
dmidecode: External Connector Type: Other
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0021, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: CDIN
dmidecode: Internal Connector Type: On Board Sound Input From CD-ROM
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0022, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: PRI IDE
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0023, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: SEC IDE
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0024, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: FLOPPY
dmidecode: Internal Connector Type: On Board Floppy
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0025, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: CHA_FAN
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0026, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: CPU FAN
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0027, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: FP AUDIO
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0028, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: SB_SATA1
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0029, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: SB_SATA2
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x002A, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: SB_SATA3
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x002B, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: SB_SATA4
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x002C, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCIEX16
dmidecode: Type: 32-bit PCI Express
dmidecode: Current Usage: Available
dmidecode: Length: Short
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: Opening is shared
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x002D, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCIEX1
dmidecode: Type: x1 PCI Express
dmidecode: Current Usage: Available
dmidecode: Length: Short
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: Opening is shared
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x002E, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI1
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Short
dmidecode: ID: 4
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: Opening is shared
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x002F, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI2
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Short
dmidecode: ID: 5
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: Opening is shared
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0030, DMI type 10, 6 bytes
dmidecode: On Board Device Information
dmidecode: Type: Video
dmidecode: Status: Enabled
dmidecode: Description: To Be Filled By O.E.M.
dmidecode:
dmidecode: Handle 0x0031, DMI type 10, 6 bytes
dmidecode: On Board Device Information
dmidecode: Type: Ethernet
dmidecode: Status: Enabled
dmidecode: Description: To Be Filled By O.E.M.
dmidecode:
dmidecode: Handle 0x0032, DMI type 10, 6 bytes
dmidecode: On Board Device Information
dmidecode: Type: Sound
dmidecode: Status: Enabled
dmidecode: Description: To Be Filled By O.E.M.
dmidecode:
dmidecode: Handle 0x0033, DMI type 11, 5 bytes
dmidecode: OEM Strings
dmidecode: String 1: 00173129090D
dmidecode: String 2: To Be Filled By O.E.M.
dmidecode: String 3: To Be Filled By O.E.M.
dmidecode: String 4: To Be Filled By O.E.M.
dmidecode:
dmidecode: Handle 0x0034, DMI type 13, 22 bytes
dmidecode: BIOS Language Information
dmidecode: Installable Languages: 1
dmidecode: en|US|iso8859-1
dmidecode: Currently Installed Language: en|US|iso8859-1
dmidecode:
dmidecode: Handle 0x0035, DMI type 15, 35 bytes
dmidecode: System Event Log
dmidecode: Area Length: 4 bytes
dmidecode: Header Start Offset: 0x0000
dmidecode: Header Length: 2 bytes
dmidecode: Data Start Offset: 0x0002
dmidecode: Access Method: Indexed I/O, one 16-bit index port, one 8-bit data port
dmidecode: Access Address: Index 0x046A, Data 0x046C
dmidecode: Status: Invalid, Not Full
dmidecode: Change Token: 0x00000000
dmidecode: Header Format: No Header
dmidecode: Supported Log Type Descriptors: 6
dmidecode: Descriptor 1: End of log
dmidecode: Data Format 1: OEM-specific
dmidecode: Descriptor 2: End of log
dmidecode: Data Format 2: OEM-specific
dmidecode: Descriptor 3: End of log
dmidecode: Data Format 3: OEM-specific
dmidecode: Descriptor 4: End of log
dmidecode: Data Format 4: OEM-specific
dmidecode: Descriptor 5: End of log
dmidecode: Data Format 5: OEM-specific
dmidecode: Descriptor 6: End of log
dmidecode: Data Format 6: OEM-specific
dmidecode:
dmidecode: Handle 0x0036, DMI type 16, 15 bytes
dmidecode: Physical Memory Array
dmidecode: Location: System Board Or Motherboard
dmidecode: Use: System Memory
dmidecode: Error Correction Type: None
dmidecode: Maximum Capacity: 4 GB
dmidecode: Error Information Handle: Not Provided
dmidecode: Number Of Devices: 4
dmidecode:
dmidecode: Handle 0x0037, DMI type 19, 15 bytes
dmidecode: Memory Array Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0007FFFFFFF
dmidecode: Range Size: 2 GB
dmidecode: Physical Array Handle: 0x0036
dmidecode: Partition Width: 0
dmidecode:
dmidecode: Handle 0x0038, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0036
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 64 bits
dmidecode: Data Width: 72 bits
dmidecode: Size: 1024 MB
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: DIMM0
dmidecode: Bank Locator: BANK0
dmidecode: Type: DDR
dmidecode: Type Detail: Synchronous
dmidecode: Speed: 400 MHz (2.5 ns)
dmidecode: Manufacturer: Manufacturer0
dmidecode: Serial Number: SerNum0
dmidecode: Asset Tag: AssetTagNum0
dmidecode: Part Number: PartNum0
dmidecode:
dmidecode: Handle 0x0039, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0003FFFFFFF
dmidecode: Range Size: 1 GB
dmidecode: Physical Device Handle: 0x0038
dmidecode: Memory Array Mapped Address Handle: 0x0037
dmidecode: Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x003A, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0036
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 64 bits
dmidecode: Data Width: 72 bits
dmidecode: Size: 1024 MB
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: DIMM1
dmidecode: Bank Locator: BANK1
dmidecode: Type: DDR
dmidecode: Type Detail: Synchronous
dmidecode: Speed: 400 MHz (2.5 ns)
dmidecode: Manufacturer: Manufacturer1
dmidecode: Serial Number: SerNum1
dmidecode: Asset Tag: AssetTagNum1
dmidecode: Part Number: PartNum1
dmidecode:
dmidecode: Handle 0x003B, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00040000000
dmidecode: Ending Address: 0x0007FFFFFFF
dmidecode: Range Size: 1 GB
dmidecode: Physical Device Handle: 0x003A
dmidecode: Memory Array Mapped Address Handle: 0x0037
dmidecode: Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x003C, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0036
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: Unknown
dmidecode: Data Width: Unknown
dmidecode: Size: No Module Installed
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: DIMM2
dmidecode: Bank Locator: BANK2
dmidecode: Type: Unknown
dmidecode: Type Detail: Unknown
dmidecode: Speed: Unknown
dmidecode: Manufacturer: Manufacturer2
dmidecode: Serial Number: SerNum2
dmidecode: Asset Tag: AssetTagNum2
dmidecode: Part Number: PartNum2
dmidecode:
dmidecode: Handle 0x003D, DMI type 126, 19 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x003E, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x0036
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: Unknown
dmidecode: Data Width: Unknown
dmidecode: Size: No Module Installed
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: DIMM3
dmidecode: Bank Locator: BANK3
dmidecode: Type: Unknown
dmidecode: Type Detail: Unknown
dmidecode: Speed: Unknown
dmidecode: Manufacturer: Manufacturer3
dmidecode: Serial Number: SerNum3
dmidecode: Asset Tag: AssetTagNum3
dmidecode: Part Number: PartNum3
dmidecode:
dmidecode: Handle 0x003F, DMI type 126, 19 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x0040, DMI type 32, 20 bytes
dmidecode: System Boot Information
dmidecode: Status: No errors detected
dmidecode:
dmidecode: Handle 0x0041, DMI type 127, 4 bytes
dmidecode: End Of Table
dmidecode:
==============================================
Installer status:
==============================================
Package: usb-storage-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: usb-storage-modules
Depends: ide-core-modules-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di, usb-modules-2.6.16-2-486-di
Description: USB storage support
Package: scsi-common-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: scsi-common-modules
Depends: kernel-image-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di, cdrom-core-modules-2.6.16-2-486-di
Description: Very common SCSI drivers
Package: preseed-common
Status: install ok unpacked
Version: 1.17
Depends: di-utils (>= 1.14)
Description: common files for preseeding
Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone
Package: localechooser
Status: install ok installed
Version: 1.22
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10
Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6-15
Description: GNU C Library: NSS helper for DNS - udeb
Package: cdrom-checker
Status: install ok unpacked
Version: 1.07
Depends: cdrom-detect, cdebconf-udeb (>= 0.31)
Description: Verify the cd contents
Installer-Menu-Item: 940
Package: floppy-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: floppy-modules
Depends: kernel-image-2.6.16-2-486-di
Description: Floppy driver
Package: lowmemcheck
Status: install ok unpacked
Version: 1.20
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode
Package: cdrom-retriever
Status: install ok installed
Version: 1.11
Provides: retriever
Depends: cdrom-detect
Description: Fetch modules from a CDROM
Package: main-menu
Status: install ok unpacked
Version: 1.13
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.42), cdebconf-udeb
Description: Debian installer main menu
Package: di-utils-shell
Status: install ok unpacked
Version: 1.32
Depends: cdebconf-udeb (>= 0.73), di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950
Package: di-utils
Status: install ok installed
Version: 1.32
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.42), cdebconf-udeb (>= 0.97)
Description: Miscellaneous utilities for the debian installer
Package: serial-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: serial-modules
Depends: kernel-image-2.6.16-2-486-di, pcmcia-modules-2.6.16-2-486-di
Description: Serial drivers
Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.104+b1
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.6-6), libnewt0.52
Description: Newt frontend for Debian Configuration Management System
Package: ide-core-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: ide-core-modules
Depends: kernel-image-2.6.16-2-486-di
Description: IDE support
Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.2.2-3
Depends: libc6 (>= 2.3.6-6)
Description: tools for managing Linux kernel modules
Package: rootskel
Status: install ok installed
Version: 1.33
Depends: di-utils (>= 1.24)
Description: Skeleton root filesystem used by debian-installer
Package: pcmcia-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: pcmcia-modules
Depends: kernel-image-2.6.16-2-486-di, firmware-modules-2.6.16-2-486-di
Description: Common PCMCIA drivers
Package: udev-udeb
Status: install ok unpacked
Version: 0.093-1
Depends: libc6 (>= 2.3.6-6)
Description: /dev/ and hotplug management daemon
Package: scsi-core-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: scsi-core-modules
Depends: kernel-image-2.6.16-2-486-di
Description: Core SCSI subsystem
Package: firewire-core-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: firewire-core-modules
Depends: scsi-core-modules-2.6.16-2-486-di, kernel-image-2.6.16-2-486-di
Description: Core FireWire drivers
Package: brltty-udeb
Status: install ok unpacked
Version: 3.7.2-3
Depends: libc6 (>= 2.3.6-6)
Description: Access software for a blind person using a soft braille terminal
Package: pcmcia-storage-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: pcmcia-storage-modules
Depends: kernel-image-2.6.16-2-486-di, ide-core-modules-2.6.16-2-486-di, cdrom-core-modules-2.6.16-2-486-di, pcmcia-modules-2.6.16-2-486-di
Description: PCMCIA storage drivers
Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-3
Depends: libc6 (>= 2.3.5-1)
Description: Free Implementation of the Unicode BiDi algorithm
Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.6-6)
Description: text-wrapping library with i18n - runtime udeb
Package: usb-discover
Status: install ok unpacked
Version: 1.05
Description: Discover USB and load kernel modules
Package: rescue-check
Status: install ok unpacked
Version: 1.4
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested
Package: nano-udeb
Status: install ok unpacked
Version: 1.3.12-2
Provides: editor
Depends: libc6 (>= 2.3.6-6), libslang2-udeb (>= 2.0.1-1)
Description: free Pico clone with some new features - tiny build
Package: cdebconf-udeb
Status: install ok installed
Version: 0.104+b1
Provides: debconf-2.0
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.43), libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)
Package: load-cdrom
Status: install ok installed
Version: 1.11
Depends: cdrom-retriever, anna (>= 1.07)
Description: Load installer components from CD
Installer-Menu-Item: 16
Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.104+b1
Depends: cdebconf-udeb, libc6 (>= 2.3.6-6)
Description: Plain text frontend for Debian Configuration Management System
Package: iso-3166-udeb
Status: install ok installed
Version: 0.52-1
Description: provides iso_3166.tab file
Package: cdrom-core-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: cdrom-core-modules
Depends: kernel-image-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di, ide-modules-2.6.16-2-486-di
Description: CDROM support
Package: fat-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: fat-modules
Depends: kernel-image-2.6.16-2-486-di
Description: FAT filesystem support
Package: floppy-retriever
Status: install ok unpacked
Version: 1.09
Provides: retriever
Depends: mountfloppy
Description: Fetches modules from a floppy
Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-2
Depends: libc6 (>= 2.3.6-6)
Description: Tiny utilities for the debian-installer
Package: initrd-preseed
Status: install ok unpacked
Version: 1.17
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd
Package: archdetect
Status: install ok installed
Version: 1.40
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.43)
Description: Hardware architecture detector
Package: fb-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: fb-modules
Depends: kernel-image-2.6.16-2-486-di
Description: Frame buffer support
Package: save-logs
Status: install ok unpacked
Version: 2.17
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940
Package: di-utils-reboot
Status: install ok unpacked
Version: 1.32
Description: Reboot
Installer-Menu-Item: 995
Package: anna
Status: install ok installed
Version: 1.24
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do
Package: kernel-image-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer
Package: ide-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: ide-modules
Depends: kernel-image-2.6.16-2-486-di, ide-core-modules-2.6.16-2-486-di
Description: IDE drivers
Package: libsysfs2-udeb
Status: install ok unpacked
Version: 2.0.0-7
Provides: libsysfs2
Depends: libc6 (>= 2.3.6-6)
Description: interface library to sysfs
Package: pcmciautils-udeb
Status: install ok unpacked
Version: 014-2
Depends: udev-udeb, libc6 (>= 2.3.6-6), libsysfs2-udeb
Description: PCMCIA utilities for Linux 2.6
Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.1-2
Depends: libc6 (>= 2.3.6-6)
Description: Linux PCI Utilities (udeb)
Package: console-keymaps-at
Status: install ok installed
Version: 2:1.0-2
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards
Package: input-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: input-modules
Depends: kernel-image-2.6.16-2-486-di, usb-modules-2.6.16-2-486-di
Description: Input devices support
Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.32
Description: Terminfo entries needed by newt/slang in debian installer
Package: scsi-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: scsi-modules
Depends: kernel-image-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di, parport-modules-2.6.16-2-486-di, cdrom-core-modules-2.6.16-2-486-di, firmware-modules-2.6.16-2-486-di
Description: SCSI drivers
Package: hw-detect
Status: install ok installed
Version: 1.40
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it
Package: kbd-chooser
Status: install ok installed
Version: 1.29
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12
Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.43
Depends: libc6 (>= 2.3.6-6)
Description: Library of common debian-installer functions
Package: acpi-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: acpi-modules
Depends: kernel-image-2.6.16-2-486-di
Description: ACPI support modules
Package: firmware-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: firmware-modules
Depends: kernel-image-2.6.16-2-486-di
Description: Firmware request modules
Package: sata-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: sata-modules
Depends: kernel-image-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di
Description: SATA drivers
Package: cdrom-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: cdrom-modules
Depends: ide-modules-2.6.16-2-486-di, cdrom-core-modules-2.6.16-2-486-di, kernel-image-2.6.16-2-486-di
Description: Esoteric CDROM drivers
Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale
Package: env-preseed
Status: install ok unpacked
Version: 1.17
Description: debconf preseeding via environment variables
Package: mountfloppy
Status: install ok unpacked
Version: 0.6
Depends: di-utils (>= 1.15)
Description: Mounts a floppy
Package: cdebconf-priority
Status: install ok unpacked
Version: 0.104
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930
Package: file-preseed
Status: install ok unpacked
Version: 1.17
Depends: di-utils, preseed-common
Description: load debconf preseed file
Installer-Menu-Item: 14
Package: usb-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: usb-modules
Depends: kernel-image-2.6.16-2-486-di
Description: USB support
Package: usb-serial-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: usb-serial-modules
Depends: kernel-image-2.6.16-2-486-di, usb-modules-2.6.16-2-486-di
Description: USB serial drivers
Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.104+b1
Depends: libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)
Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.4
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal
Package: cdrom-detect
Status: install ok installed
Version: 1.16
Depends: hw-detect, di-utils (>= 1.15)
Description: Detect CDROM devices and mount the CD
Installer-Menu-Item: 13
Package: parport-modules-2.6.16-2-486-di
Status: install ok unpacked
Version: 1.33
Provides: parport-modules
Depends: kernel-image-2.6.16-2-486-di
Description: Parallel port support
Package: debian-installer
Status: install ok installed
Version: cdrom-isolinux-2.6-20060806
Description: debian installation image
Package: apt-cdrom-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.13
Depends: cdrom-detect
Provides: apt-mirror-setup
Description: set up a CD in sources.list
Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.13
Depends: choose-mirror-bin
Description: set up a mirror in sources.list
Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 96
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.13
Depends: apt-mirror-setup, base-installer (>= 1.49)
Description: Configure apt
Installer-Menu-Item: 70
Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 576
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.64
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19)
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65
Package: cdebconf-newt-entropy
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.4
Depends: cdebconf-newt-udeb, libc6 (>= 2.3.6-6), libnewt0.52
Description: cdebconf newt plugin for reading from /dev/random
cdebconf plugin to facilitate reading random data from /dev/random.
Asks the user to enter random characters on the keyboard and shows a
progressbar with percent-of-data read.
Package: choose-mirror-bin
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 276
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.04
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), cdebconf-udeb
Description: Choose mirror to install from (program)
Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 72
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.10
Depends: os-prober, tzsetup-udeb, mounted-partitions
Description: set up clock
Installer-Menu-Item: 62
Package: crc-modules-2.6.16-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: crc-modules
Description: CRC modules
This package contains CRC support modules.
Package: crypto-modules-2.6.16-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: crypto-modules
Description: crypto modules
This package contains crypto modules.
Package: cryptsetup-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 400
Maintainer: Debian Cryptsetup Team <pkg-cryptsetup-devel@lists.alioth.debian.org>
Version: 2:1.0.3-3
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2), libpopt0-udeb (>= 1.10), libuuid1-udeb, dmsetup-udeb
Description: configures encrypted block devices
Since kernel 2.6.4, encrypted filesystem support is provided by the device
mapper target dm-crypt. This utility provides a command-line interface for
configuring this facility. It has integrated support for LUKS.
.
cryptsetup is backwards compatible with the on-disk format of cryptoloop,
but also supports more secure formats. This package also includes support
for automatically configuring encrypted devices at boot time via the config
file /etc/crypttab. When combined with newer versions of the debian
initrd-tools and standard debian kernels, cryptoroot is also supported.
Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 168
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3
Depends: libc6 (>= 2.3.5-1), mounted-partitions
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.
.
debootstrap-udeb is a minimal package used by debian-installer.
Package: dhcp-client-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 100
Maintainer: Eloy A. Paris <peloy@debian.org>
Version: 2.0pl5-19.4
Depends: libc6 (>= 2.3.5-1)
Description: DHCP Client for debian-installer
dhcp-client-udeb is a minimal dhcp package used by the debian-installer.
Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.32
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.42)
Description: mapdevfs utility for the debian installer
Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.40
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35
Package: dmidecode-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 60
Maintainer: Petter Reinholdtsen <pere@debian.org>
Version: 2.8-2
Depends: libc6 (>= 2.3.5-1)
Description: Dump Desktop Management Interface data (udeb)
Package: dmsetup-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.07-1
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Kernel Device Mapper userspace library
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
.
This package contains a utility for modifying device mappings.
Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 352
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39-1
Depends: libblkid1-udeb, libc6 (>= 2.3.6-6)
Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: elilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 88
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.6
Depends: cdebconf-udeb, base-installer, partconf-find-partitions (>= 1.08), di-utils-mapdevfs, fat-modules, firmware-modules, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install elilo on a hard disk
This udeb will install elilo on the hard disk.
Installer-Menu-Item: 76
Package: ethdetect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.40
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: ethernet-card-detection
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 18
Package: ext3-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 240
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: ext3-modules
Description: EXT3 filesystem support
This package contains the EXT3 filesystem module for the Linux kernel.
Package: fdisk-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 140
Maintainer: LaMont Jones <lamont@debian.org>
Version: 2.12r-10
Depends: libc6 (>= 2.3.6-6)
Description: Partition a hard drive (manual)
fdisk package
Package: finish-install
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 104
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.4
Depends: archdetect, base-installer, created-fstab, bootable-system
Provides: prebaseconfig
Description: Finish the installation and reboot
Installer-Menu-Item: 78
Package: gnupg-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 664
Maintainer: James Troup <james@nocrew.org>
Version: 1.4.3-2
Depends: libc6 (>= 2.3.6-6), libusb-0.1-udeb (>= 2:0.1.12), zlib1g-udeb (>= 1:1.2.1)
Description: GNU privacy guard - a free PGP replacement
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC2440.
.
This is GnuPG packaged in minimal form for use in debian-installer.
Package: grub-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 324
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils (>= 1.15), di-utils-mapdevfs, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install GRUB on a hard disk
Installer-Menu-Item: 73
Package: jfs-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: jfs-modules
Description: JFS filesystem support
This package contains the JFS filesystem module for the Linux kernel.
Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 984
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.11-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of jfsutils, for debian-installer
This package is a jfsutils package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 40
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39-1
Depends: libc6 (>= 2.3.6-6)
Provides: libblkid1
Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 1592
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6-15
Provides: libc6, libc-udeb, glibc-2.3.6-2, glibc-2.3.5-3
Description: GNU C Library: Shared libraries - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains a minimal set of libraries needed for the Debian
installer. Do not install it on a normal system.
Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 52
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.07-1
Depends: libc6 (>= 2.3.6-6)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
This is a udeb, or a microdeb, for the debian-installer.
.
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
Package: libiw28-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 24
Maintainer: Guus Sliepen <guus@debian.org>
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 328
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-2.1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: libpopt0-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Paul Martin <pm@debian.org>
Version: 1.10-2
Depends: libc6 (>= 2.3.6-6)
Description: lib for parsing cmdline parameters
Popt was heavily influenced by the getopt() and getopt_long() functions,
but it allows more powerful argument expansion. It can parse arbitrary
argv[] style arrays and automatically set variables based on command
line arguments. It also allows command line arguments to be aliased via
configuration files and includes utility functions for parsing arbitrary
strings into argv[] arrays using shell-like rules.
.
This package contains the runtime library and locale data.
.
This is a minimal package for use in debian-installer.
Package: libusb-0.1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Aurelien Jarno <aurel32@debian.org>
Version: 2:0.1.12-2
Depends: libc6 (>= 2.3.5-1)
Provides: libusb-0.1-4
Description: userspace USB programming library
Library for programming USB applications without the knowledge
of Linux kernel internals.
.
More information can be found at the Linux USB web site
http://www.linux-usb.org/ .
.
This is a minimal package for use in debian-installer.
Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 20
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39-1
Depends: libc6 (>= 2.3.6-6)
Provides: libuuid1
Description: universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's),
using a standard which is blessed by both Microsoft and DCE, and is
being proposed as an internet standard. See the internet-draft:
.
draft-leach-uuids-guids-01.txt
.
for more information.
.
This is a minimal package for debian-installer.
Package: lilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 204
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.16
Depends: cdebconf-udeb, kernel-installer, di-utils (>= 1.15), di-utils-mapdevfs, fdisk-udeb, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install LILO on a hard disk
Installer-Menu-Item: 75
Package: loop-aes-2.6.16-2-486-di
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 148
Maintainer: Max Vozeler <xam@debian.org>
Version: 3.1d+3+3
Depends: kernel-image-2.6.16-2-486-di, mount-aes-udeb (>= 2.12p-1)
Provides: loop-aes-modules
Description: loop-AES encryption modules for kernel 2.6.16-2-486-di
This package contains the loop-AES loadable Linux kernel modules
compiled for kernel 2.6.16-2-486-di
.
loop-AES can be used to encrypt disk partitions, removable media,
swap space and other devices. It provides measures to strengthen
the encryption: Passphrase seeds, multiple hash iterations, MD5 IV
and use of alternating encryption keys.
.
Encryption keys can be stored in a GnuPG-encrypted keyfile, which
allows the passphrase to be changed without re-encryption. Keyfiles
can also be encrypted asymmetrically for multi-user access.
.
This package includes the cipher modules blowfish, twofish and
serpent in addition to the default cipher (AES).
.
If you compiled a custom kernel, you will most likely need to
compile a custom version of these modules as well. The package
loop-aes-source has been provided for this purpose.
Package: loop-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: loop-modules
Description: Loopback filesystem support
This package contains loopback filesystem support for the Linux kernel.
Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 396
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.06-2
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Logical Volume Manager
This is a udeb, or a microdeb, for the debian-installer.
.
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Package: md-modules-2.6.16-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 340
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: md-modules
Description: RAID and LVM support
This package contains RAID and LVM modules for the Linux kernel.
Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 140
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 2.5.2-7
Depends: libc6 (>= 2.3.6-6)
Description: tool to administer Linux MD device arrays (software RAID)
mdadm is a program that can be used to create, manage, and monitor MD
devices (software RAID), as well as multipath devices.
.
mdadm-udeb is a minimal package used by the debian-installer.
Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 356
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.16
Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb, partconf-find-partitions
Description: Configure MD devices
Use this module to configure the MD devices.
Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 144
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-3
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: User-level tools for ReiserFS filesystems
This installer module contains the utility to create ReiserFS filesystems.
.
Homepage: http://www.namesys.com/
Package: mount-aes-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 216
Maintainer: Max Vozeler <xam@debian.org>
Version: 2.12r-13
Depends: libblkid1-udeb (>= 1.37-1), libc6 (>= 2.3.6-6), libuuid1-udeb
Description: Mount utils for loop-AES
loop-AES patched mount, losetup and swapon
Package: netcfg
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 788
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Provides: configured-network
Description: Configure the network
To install additional installer components or the Debian Base System over
the network, you need to configure the network in the installer. This
component will first try to configure your network with DHCP and ask
you for static network configuration if this fails. The configured
network settings will be copied to your newly installed system.
Installer-Menu-Item: 18
Package: network-preseed
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 20
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21
Package: nic-extra-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 2648
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di, nic-shared-modules-2.6.16-2-486-di, firmware-modules-2.6.16-2-486-di, crc-modules-2.6.16-2-486-di
Provides: nic-extra-modules
Description: Rare NIC drivers
This package contains rare NIC drivers for the Linux kernel.
Package: nic-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 436
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di, nic-shared-modules-2.6.16-2-486-di, firmware-modules-2.6.16-2-486-di, firewire-core-modules-2.6.16-2-486-di
Provides: nic-modules
Description: Common NIC drivers
This package contains common NIC drivers for the Linux kernel.
Package: nic-pcmcia-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 588
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di, nic-shared-modules-2.6.16-2-486-di, nic-extra-modules-2.6.16-2-486-di, pcmcia-modules-2.6.16-2-486-di
Provides: nic-pcmcia-modules
Description: Common PCMCIA NIC drivers
This package contains common PCMCIA NIC drivers for the Linux kernel.
Package: nic-shared-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: nic-shared-modules
Description: Shared NIC drivers
This package contains NIC drivers needed by combinations of nic-modules,
nic-extra-modules, and nic-pcmcia-modules.
Package: nic-usb-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 188
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di, nic-shared-modules-2.6.16-2-486-di, usb-modules-2.6.16-2-486-di, firmware-modules-2.6.16-2-486-di
Provides: nic-usb-modules
Description: USB NIC drivers
This package contains USB network adapter drivers for the Linux kernel.
Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 136
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.09
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
This package will skip installing a boot-loader
Installer-Menu-Item: 77
Package: ntfstools-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 164
Maintainer: David Mart��nez Moreno <ender@debian.org>
Version: 1.12.1-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for doing neat things in NTFS partitions from Linux - udeb
Currently this udeb contains only ntfsresize.
Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 128
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.13
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
This package is to be used by boot loader installers to detect other OSes
available on a system, in a generic format, which it can then adapt to its
own configuration format.
Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.16
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.41), libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for finding partitions
Helper program for finding partitions and detecting their size and
existing file system.
Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 60
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-2.1
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1)
Provides: parted
Description: The GNU Parted disk partition resizing program
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package is similar to the "big" parted package, but has
less cosmetical features resulting in smaller binary. Intended
to be used in debian-installer.
.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 656
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 54
Depends: di-utils, partman-base, partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)
Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 140
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 13
Depends: partman-base (>= 73), partman-auto (>= 51), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM
Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 836
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 92
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1), partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42
Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 564
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 48
Depends: e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32
Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 31
Provides: partman-method
Description: Basic partition usage methods for partman
This package provides partman with two methods to use partitions.
The first is to format the partition. The second is to keep and use
the existing data in the partition as it is.
Package: partman-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 692
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 9
Depends: partman-base (>= 87), partman-crypto-dm, partman-crypto-loop, cdebconf-newt-entropy (>= 0.3), libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Add to partman support for block device encryption
Package: partman-crypto-dm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 9
Depends: partman-crypto, crypto-modules, cryptsetup-udeb
Description: Add to partman support for dm-crypt encryption
Package: partman-crypto-loop
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 136
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 9
Depends: partman-crypto, loop-aes-modules, mount-aes-udeb, gnupg-udeb
Description: Add to partman support for loop-AES encryption
Package: partman-efi
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 124
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 10
Depends: partman-base
Description: Add to partman support for EFI boot partitions
Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 41
Depends: e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3
Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 252
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 17
Depends: jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman
Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 616
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 45
Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb
Description: Adds support for LVM to partman
Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 152
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 29
Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87)
Description: Add to partman support for MD
Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 348
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 40
Depends: ntfstools-udeb
Description: Partitioning operations for partman
This udeb provides partman with editing operations for creation
of new partitions, deletion of partitions and initialisation of the
partition table.
Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 31
Depends: mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs
Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 292
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 44
Depends: partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
This udeb allows the user to choose how partitions should be used.
Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 29
Depends: xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs
Package: pcmcia-cs-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 228
Maintainer: Per Olofsson <pelle@debian.org>
Version: 3.2.8-8
Description: PCMCIA Card Services for Linux (udeb)
Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 28
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.07.1
Depends: apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70
Package: reiserfs-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 276
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: reiserfs-modules
Description: Reiser filesystem support
This package contains the Reiser filesystem module for the Linux kernel.
Package: scsi-extra-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1308
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: scsi-modules-2.6.16-2-486-di, scsi-core-modules-2.6.16-2-486-di
Provides: scsi-extra-modules
Description: Uncommon SCSI drivers
This package contains uncommon SCSI drivers for the Linux kernel.
This includes SCSI RAID drivers, and some of the less common SCSI
controllers.
Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 276
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.10
Depends: localechooser
Description: choose timezone
Installer-Menu-Item: 62
Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 256
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.4
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63
Package: wireless-tools-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 28
Maintainer: Guus Sliepen <guus@debian.org>
Version: 28-1
Depends: libc6 (>= 2.3.5-1), libiw28-udeb (>= 28)
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: xfs-modules-2.6.16-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 580
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: xfs-modules
Description: XFS filesystem support
This package contains the XFS filesystem module for the Linux kernel.
Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 232
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.8.4-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of xfsprogs, for debian-installer
This package is an xfsprogs package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: zlib1g-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 100
Maintainer: Mark Brown <broonie@debian.org>
Version: 1:1.2.3-13
Provides: zlib1g
Description: compression library - runtime for Debian installer
zlib is a library implementing the deflate compression method found
in gzip and PKZIP. This minimal package includes the shared library
for use with the Debian installer.
Package: ntfs-modules-2.6.16-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 256
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: ntfs-modules
Description: NTFS filesystem support
This package contains the NTFS file system module for the Linux kernel.
Package: qnx4-modules-2.6.16-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: kernel-image-2.6.16-2-486-di
Provides: qnx4-modules
Description: QNX4 filesystem support
This package contains the QNX4 filesystem module for the Linux kernel.
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (500, 'testing'), (500, 'stable'), (50, 'unstable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.16-2-k7-smp
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
installation-report depends on no packages.
Versions of packages installation-report recommends:
ii reportbug 3.21.2 reports bugs in the Debian distrib
-- no debconf information
Bug reassigned from package `installation-reports' to `lvmcfg'.
Request was from Colin Watson <cjwatson@debian.org>
to control@bugs.debian.org.
(Fri, 14 Mar 2008 15:36:18 GMT) (full text, mbox, link).
Bug reassigned from package `lvmcfg' to `partman-lvm'.
Request was from Frans Pop <elendil@planet.nl>
to control@bugs.debian.org.
(Fri, 14 Mar 2008 16:18:02 GMT) (full text, mbox, link).
Send a report that this bug log contains spam.
Debbugs is free software and licensed under the terms of the GNU Public License version 2. The current version can be obtained from https://bugs.debian.org/debbugs-source/.
Copyright © 1999 Darren O. Benham, 1997,2003 nCipher Corporation Ltd, 1994-97 Ian Jackson, 2005-2017 Don Armstrong, and many other contributors.