Debian Bug report logs - #305551
k3b offlined scside device and hung all IO to it

version graph

Package: k3b; Maintainer for k3b is Debian KDE Extras Team <pkg-kde-extras@lists.alioth.debian.org>; Source for k3b is src:k3b (PTS, buildd, popcon).

Reported by: bmaildb@free.fr

Date: Wed, 20 Apr 2005 18:48:07 UTC

Severity: normal

Tags: fixed-upstream, moreinfo

Found in version 0.11.20-1

Fixed in version k3b/1.0-1

Done: "Francois Marier" <francois@debian.org>

Bug is archived. No further changes may be made.

Forwarded to http://bugs.kde.org/129123

Toggle useless messages

View this report as an mbox folder, status mbox, maintainer mbox

Report forwarded to debian-bugs-dist@lists.debian.org, Jean-Michel Kelbert <kelbert@debian.org>:
Bug#305551; Package k3b. (full text, mbox, link).

Acknowledgement sent to Mike J Dunphy <mjd@hpcvsmjd.cv.hp.com>:
New Bug report received and forwarded. Copy sent to Jean-Michel Kelbert <kelbert@debian.org>. (full text, mbox, link).

Message #5 received at submit@bugs.debian.org (full text, mbox, reply):

From: Mike J Dunphy <mjd@hpcvsmjd.cv.hp.com>
To: Debian Bug Tracking System <submit@bugs.debian.org>
Subject: k3b offlined scside device and hung all IO to it
Date: Wed, 20 Apr 2005 11:30:52 -0700
Package: k3b
Version: 0.11.20-1
Severity: normal

k3b caused the /dev/scd0 to be offline and
hung ... could not even eject blank disk
had to power cycle ...

device is 

Host: scsi3 Channel: 00 Id: 00 Lun: 00
  Vendor: PHILIPS  Model: DVD8631          Rev: BB03
  Type:   CD-ROM                           ANSI SCSI revision: 02


dmesg ........

Device sr0 not ready.
nfs warning: mount version older than kernel
Device sr0 not ready.
Device sr0 not ready.
cdrom: This disc doesn't have any tracks I recognize!
hdc: DMA timeout retry
hdc: timeout waiting for DMA
hdc: status error: status=0x00 { }
ide: failed opcode was: unknown
ide-scsi: Strange, packet command initiated yet DRQ isn't asserted
hdc: status error: status=0x00 { }
ide: failed opcode was: unknown
ide-scsi: Strange, packet command initiated yet DRQ isn't asserted
ide-scsi: No active request in idescsi_eh_reset
scsi: Device offlined - not ready after error recovery: host 3 channel 0 id 0
lun 0
scsi: Device offlined - not ready after error recovery: host 3 channel 0 id 0
lun 0
ide-scsi: (IO,CoD) != (0,1) while issuing a packet command
SCSI error : <3 0 0 0> return code = 0x2
scsi3 (0:0): rejecting I/O to offline device
sr0: CDROM (ioctl) error, command: <6>Test Unit Ready 00 00 00 00 00 00
Unrecognized sense data (in hex):
        00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
scsi3 (0:0): rejecting I/O to offline device
hdc: ATAPI reset complete
hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hdc: drive not ready for command
hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hdc: drive not ready for command
Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed
soon!
cdrom: open failed.
scsi3 (0:0): rejecting I/O to offline device
cdrom: open failed.
scsi3 (0:0): rejecting I/O to offline device
cdrom: open failed.
scsi3 (0:0): rejecting I/O to offline device
cdrom: open failed.
scsi3 (0:0): rejecting I/O to offline device
cdrom: open failed.
scsi3 (0:0): rejecting I/O to offline device

-- System Information:
Debian Release: 3.1
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.11.4
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)

Versions of packages k3b depends on:
ii  cdparanoia               3a9.8-11        An audio extraction tool for sampl
ii  cdrecord                 4:2.01+01a01-2  command line CD writing tool
ii  k3blibs                  0.11.20-1       The KDE cd burning application lib
ii  kcontrol                 4:3.3.2-1       KDE Control Center
ii  kdebase-bin              4:3.3.2-1       KDE Base (binaries)
ii  kdelibs-data             4:3.3.2-1       KDE core shared data
ii  kdelibs4                 4:3.3.2-1       KDE core libraries
ii  libart-2.0-2             2.3.17-1        Library of functions for 2D graphi
ii  libarts1                 1.3.2-2         aRts Sound system
ii  libasound2               1.0.8-3         ALSA library
ii  libaudio2                1.7-2           The Network Audio System (NAS). (s
ii  libaudiofile0            0.2.6-5         Open-source version of SGI's audio
ii  libc6                    2.3.2.ds1-20    GNU C Library: Shared libraries an
ii  libesd0                  0.2.35-2        Enlightened Sound Daemon - Shared 
ii  libfam0c102              2.7.0-6         client library to control the FAM 
ii  libfontconfig1           2.2.3-4         generic font configuration library
ii  libfreetype6             2.1.7-2.3       FreeType 2 font engine, shared lib
ii  libgcc1                  1:3.4.3-6       GCC support library
ii  libglib2.0-0             2.6.3-1         The GLib library of C routines
ii  libice6                  4.3.0.dfsg.1-10 Inter-Client Exchange library
ii  libidn11                 0.5.2-3         GNU libidn library, implementation
ii  libjack0.80.0-0          0.99.0-6        JACK Audio Connection Kit (librari
ii  libmad0                  0.15.1b-1       MPEG audio decoder library
ii  libogg0                  1.1.0-1         Ogg Bitstream Library
ii  libpng12-0               1.2.8rel-1      PNG library - runtime
ii  libqt3c102-mt            3:3.3.3-8       Qt GUI Library (Threaded runtime v
ii  libsm6                   4.3.0.dfsg.1-10 X Window System Session Management
ii  libstdc++5               1:3.3.5-8       The GNU Standard C++ Library v3
ii  libvorbis0a              1.0.1-1         The Vorbis General Audio Compressi
ii  libvorbisenc2            1.0.1-1         The Vorbis General Audio Compressi
ii  libvorbisfile3           1.0.1-1         The Vorbis General Audio Compressi
ii  libx11-6                 4.3.0.dfsg.1-10 X Window System protocol client li
ii  libxcursor1              1.1.3-1         X cursor management library
ii  libxext6                 4.3.0.dfsg.1-10 X Window System miscellaneous exte
ii  libxft2                  2.1.2-6         FreeType-based font drawing librar
ii  libxrandr2               4.3.0.dfsg.1-10 X Window System Resize, Rotate and
ii  libxrender1              0.8.3-7         X Rendering Extension client libra
ii  libxt6                   4.3.0.dfsg.1-10 X Toolkit Intrinsics
ii  mkisofs                  4:2.01+01a01-2  Creates ISO-9660 CD-ROM filesystem
ii  xlibs                    4.3.0.dfsg.1-10 X Keyboard Extension (XKB) configu
ii  zlib1g                   1:1.2.2-3       compression library - runtime

-- no debconf information

Information forwarded to debian-bugs-dist@lists.debian.org, Jean-Michel Kelbert <kelbert@debian.org>:
Bug#305551; Package k3b. (full text, mbox, link).

Acknowledgement sent to Francois Marier <francois@debian.org>:
Extra info received and forwarded to list. Copy sent to Jean-Michel Kelbert <kelbert@debian.org>. (full text, mbox, link).

Message #10 received at 305551@bugs.debian.org (full text, mbox, reply):

From: Francois Marier <francois@debian.org>
To: Mike J Dunphy <mjd@hpcvsmjd.cv.hp.com>
Cc: 305551@bugs.debian.org
Subject: K3b bug
Date: Thu, 6 Oct 2005 23:11:30 -0400
Hi Mike,

Before I forward your K3b bug report [1] to the upstream developers, I was
wondering if you were still able to reproduce that bug with the latest
version of K3b that's in unstable (0.12.4a).

Thanks,

Francois

[1] http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=305551

Tags added: moreinfo Request was from Francois Marier <francois@debian.org> to control@bugs.debian.org. (full text, mbox, link).

Information forwarded to debian-bugs-dist@lists.debian.org, Jean-Michel Kelbert <kelbert@debian.org>:
Bug#305551; Package k3b. (full text, mbox, link).

Acknowledgement sent to Francois Marier <francois@debian.org>:
Extra info received and forwarded to list. Copy sent to Jean-Michel Kelbert <kelbert@debian.org>. (full text, mbox, link).

Message #17 received at 305551@bugs.debian.org (full text, mbox, reply):

From: Francois Marier <francois@debian.org>
To: 305551@bugs.debian.org
Subject: K3b bug
Date: Sun, 8 Jan 2006 01:47:29 -0500
Hi Mike,

Have you been able to reproduce the bug you reported
(http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=305551) on the latest
version of K3b?  I'd like to close it if possible or forward it upstream...

Thanks,

Francois

Reply sent to Francois Marier <francois@debian.org>:
You have taken responsibility. (full text, mbox, link).

Notification sent to Mike J Dunphy <mjd@hpcvsmjd.cv.hp.com>:
Bug acknowledged by developer. (full text, mbox, link).

Message #22 received at 305551-done@bugs.debian.org (full text, mbox, reply):

From: Francois Marier <francois@debian.org>
To: 305551-done@bugs.debian.org
Subject: Closing old K3b bug
Date: Mon, 16 Jan 2006 14:31:19 -0500
Hi Mike,

I am closing this bug for now, but feel free to reopen it if the problem
still occurs using the latest version of K3b.

Thanks,

Francois

Information forwarded to debian-bugs-dist@lists.debian.org, Jean-Michel Kelbert <kelbert@debian.org>:
Bug#305551; Package k3b. (full text, mbox, link).

Acknowledgement sent to Bertrand Maillard <bmaildb@free.fr>:
Extra info received and forwarded to list. Copy sent to Jean-Michel Kelbert <kelbert@debian.org>. (full text, mbox, link).

Message #27 received at 305551@bugs.debian.org (full text, mbox, reply):

From: Bertrand Maillard <bmaildb@free.fr>
To: 305551@bugs.debian.org
Subject: K3b bug
Date: Tue, 6 Jun 2006 15:41:32 +0200
Hello,

I think this bug is still here with K3b 0.12.15 on Etch with KDE 3.5.2, 
and obviously makes some problems with USB devices.

Linux etch 2.6.15-1-686 #2 Mon Mar 6 15:27:08 UTC 2006 i686 GNU/Linux
k3b:
  Installé : 0.12.15-2
  Candidat : 0.12.15-2
 Table de version :
 *** 0.12.15-2 0
        500 http://ftp.fr.debian.org etch/main Packages
        100 /var/lib/dpkg/status



Attached devices:
Host: scsi1 Channel: 00 Id: 00 Lun: 00
  Vendor: VBTM     Model: Store 'n' Go     Rev: 1.04
  Type:   Direct-Access                    ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 03 Lun: 00
  Vendor: PLEXTOR  Model: CD-R   PX-W4012S Rev: 1.06
  Type:   CD-ROM                           ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 04 Lun: 00
  Vendor: PLEXTOR  Model: CD-ROM PX-40TS   Rev: 1.05
  Type:   CD-ROM                           ANSI SCSI revision: 02
Host: scsi3 Channel: 00 Id: 00 Lun: 00
  Vendor: HL-DT-ST Model: DVDRAM GSA-4160B Rev: A300
  Type:   CD-ROM                           ANSI SCSI revision: 02

Scsi0 is currently provided by Adaptec 2940UW.
Scsi1 and scsi3 are usb bus.

When trying to access to usb dvd, Syslog gives this:

Jun  6 13:37:24 etch kernel: usb 4-6: USB disconnect, address 3
Jun  6 13:37:24 etch kernel:  2:0:0:0: scsi: Device offlined - not ready 
after error recovery
Jun  6 13:37:24 etch kernel:  2:0:0:0: SCSI error: return code = 0x10000
Jun  6 13:37:24 etch kernel:  2:0:0:0: rejecting I/O to dead device

And all the "usb / scsi" ring is down.
Moreover, the "pure" scsi Plextor CD burner (connected on Adaptec 
2940UW) is only seen as a simple player and trying to access to a disc 
inserted in Plextor 4012 freezes all the KDE

Syslog is quite big :

Jun  6 14:19:03 etch kernel: (scsi0:A:3:0): No or incomplete CDB sent to 
device.
Jun  6 14:19:03 etch kernel: scsi0: Issued Channel A Bus Reset. 1 SCBs 
aborted
Jun  6 14:19:03 etch kernel:  target0:0:3: FAST-20 SCSI 20.0 MB/s ST (50 
ns, offset 15)
Jun  6 14:19:03 etch kernel: (scsi0:A:3:0): No or incomplete CDB sent to 
device.
Jun  6 14:19:03 etch kernel: (scsi0:A:3:0): Protocol violation in 
Message-in phase.  Attempting to abort.
Jun  6 14:20:03 etch kernel: sr 0:0:4:0: Attempting to queue an ABORT 
message
Jun  6 14:20:03 etch kernel: CDB: 0x0 0x0 0x0 0x0 0x0 0x0
Jun  6 14:20:03 etch kernel: scsi0: At time of recovery, card was not 
paused
Jun  6 14:20:03 etch kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins 
<<<<<<<<<<<<<<<<<
Jun  6 14:20:03 etch kernel: scsi0: Dumping Card State in Message-in 
phase, at SEQADDR 0x170
Jun  6 14:20:03 etch kernel: Card was paused
Jun  6 14:20:03 etch kernel: ACCUM = 0x0, SINDEX = 0x21, DINDEX = 0x65, 
ARG_2 = 0x0
Jun  6 14:20:03 etch kernel: HCNT = 0x0 SCBPTR = 0x0
Jun  6 14:20:03 etch kernel: SCSISIGI[0x14]:(BSYI|ATNI) ERROR[0x0] 
SCSIBUSL[0xf]
Jun  6 14:20:03 etch kernel: LASTPHASE[0xe0]:(MSGI|IOI|CDI) 
SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI)
Jun  6 14:20:03 etch kernel: SBLKCTL[0x2]:(SELWIDE) SCSIRATE[0xf]:
(SXFR_ULTRA2)
Jun  6 14:20:03 etch kernel: SEQCTL[0x10]:(FASTMODE) SEQ_FLAGS[0x40]:
(NO_CDB_SENT)
Jun  6 14:20:03 etch kernel: SSTAT0[0x0] SSTAT1[0x2]:(PHASECHG) SSTAT2
[0xe]:(CRCREQERR|CRCENDERR|CRCVALERR)
Jun  6 14:20:03 etch kernel: SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xac]:
(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO)
Jun  6 14:20:03 etch kernel: SXFRCTL0[0xa8]:(SPIOEN|FAST20|DFON) 
DFCNTRL[0x4]:(DIRECTION)
Jun  6 14:20:03 etch kernel: DFSTATUS[0x6d]:(FIFOEMP|DFTHRESH|HDONE|
FIFOQWDEMP|DFCACHETH)
Jun  6 14:20:03 etch kernel: STACK: 0x37 0x61 0x0 0x19a
Jun  6 14:20:03 etch kernel: SCB count = 4
Jun  6 14:20:03 etch kernel: Kernel NEXTQSCB = 3
Jun  6 14:20:03 etch kernel: Card NEXTQSCB = 2
Jun  6 14:20:03 etch kernel: QINFIFO entries: 2
Jun  6 14:20:03 etch kernel: Waiting Queue entries:
Jun  6 14:20:03 etch kernel: Disconnected Queue entries:
Jun  6 14:20:03 etch kernel: QOUTFIFO entries:
Jun  6 14:20:03 etch kernel: Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 
10 11 12 13 14 15
Jun  6 14:20:03 etch kernel: Sequencer SCB Info:
Jun  6 14:20:03 etch kernel:   0 SCB_CONTROL[0xc8]:(ULTRAENB|DISCENB|
TARGET_SCB) SCB_SCSIID[0x37]
Jun  6 14:20:03 etch kernel: SCB_LUN[0x0] SCB_TAG[0x1]
Jun  6 14:20:03 etch kernel:   1 SCB_CONTROL[0xc8]:(ULTRAENB|DISCENB|
TARGET_SCB) SCB_SCSIID[0x47]
Jun  6 14:20:03 etch kernel: SCB_LUN[0x0] SCB_TAG[0xff]
Jun  6 14:20:03 etch kernel:   2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:
(TWIN_CHNLB|OID|TWIN_TID)
Jun  6 14:20:03 etch kernel: SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) 
SCB_TAG[0xff]
Jun  6 14:20:03 etch kernel:   3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:
(TWIN_CHNLB|OID|TWIN_TID)
Jun  6 14:20:03 etch kernel: SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) 
SCB_TAG[0xff]
Jun  6 14:20:03 etch kernel:   4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:
(TWIN_CHNLB|OID|TWIN_TID)
Jun  6 14:20:03 etch kernel: SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) 
SCB_TAG[0xff]
Jun  6 14:20:03 etch kernel:   5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:
(TWIN_CHNLB|OID|TWIN_TID)
Jun  6 14:20:03 etch kernel: SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) 
SCB_TAG[0xff]
Jun  6 14:20:03 etch kernel:   6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:
(TWIN_CHNLB|OID|TWIN_TID)
Jun  6 14:20:03 etch kernel: SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) 
SCB_TAG[0xff]
Jun  6 14:20:03 etch kernel:   7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:
(TWIN_CHNLB|OID|TWIN_TID)
Jun  6 14:20:03 etch kernel: SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) 
SCB_TAG[0xff]
Jun  6 14:20:03 etch kernel:   8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:
(TWIN_CHNLB|OID|TWIN_TID)
Jun  6 14:20:03 etch kernel: SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) 
SCB_TAG[0xff]
Jun  6 14:20:03 etch kernel:   9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:
(TWIN_CHNLB|OID|TWIN_TID)
Jun  6 14:20:03 etch kernel: SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) 
SCB_TAG[0xff]
Jun  6 14:20:03 etch kernel:  10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:
(TWIN_CHNLB|OID|TWIN_TID)
Jun  6 14:20:03 etch kernel: SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) 
SCB_TAG[0xff]
Jun  6 14:20:03 etch kernel:  11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:
(TWIN_CHNLB|OID|TWIN_TID)
Jun  6 14:20:03 etch kernel: SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) 
SCB_TAG[0xff]
Jun  6 14:20:03 etch kernel:  12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:
(TWIN_CHNLB|OID|TWIN_TID)
Jun  6 14:20:03 etch kernel: SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) 
SCB_TAG[0xff]
Jun  6 14:20:03 etch kernel:  13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:
(TWIN_CHNLB|OID|TWIN_TID)
Jun  6 14:20:03 etch kernel: SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) 
SCB_TAG[0xff]
Jun  6 14:20:03 etch kernel:  14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:
(TWIN_CHNLB|OID|TWIN_TID)
Jun  6 14:20:03 etch kernel: SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) 
SCB_TAG[0xff]
Jun  6 14:20:03 etch kernel:  15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:
(TWIN_CHNLB|OID|TWIN_TID)
Jun  6 14:20:03 etch kernel: SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) 
SCB_TAG[0xff]
Jun  6 14:20:03 etch kernel: Pending list:
Jun  6 14:20:03 etch kernel:   2 SCB_CONTROL[0x50]:(MK_MESSAGE|DISCENB) 
SCB_SCSIID[0x47]
Jun  6 14:20:03 etch kernel: SCB_LUN[0x0]
Jun  6 14:20:03 etch kernel:   1 SCB_CONTROL[0x48]:(ULTRAENB|DISCENB) 
SCB_SCSIID[0x37]
Jun  6 14:20:03 etch kernel: SCB_LUN[0x0]
Jun  6 14:20:03 etch kernel: Kernel Free SCB list: 0
Jun  6 14:20:03 etch kernel: Untagged Q(3): 1
Jun  6 14:20:03 etch kernel: Untagged Q(4): 2
Jun  6 14:20:03 etch kernel:
Jun  6 14:20:03 etch kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends 
>>>>>>>>>>>>>>>>>>
Jun  6 14:20:03 etch kernel: scsi0:0:4:0: Cmd aborted from QINFIFO
Jun  6 14:20:03 etch kernel: aic7xxx_abort returns 0x2002


You're welcome if someone needs more informations.

Bertrand

Information forwarded to debian-bugs-dist@lists.debian.org, Jean-Michel Kelbert <kelbert@debian.org>:
Bug#305551; Package k3b. (full text, mbox, link).

Acknowledgement sent to Francois Marier <francois@debian.org>:
Extra info received and forwarded to list. Copy sent to Jean-Michel Kelbert <kelbert@debian.org>. (full text, mbox, link).

Message #32 received at 305551@bugs.debian.org (full text, mbox, reply):

From: Francois Marier <francois@debian.org>
To: Bertrand Maillard <bmaildb@free.fr>, 305551@bugs.debian.org
Subject: Re: Bug#305551: K3b bug
Date: Tue, 6 Jun 2006 13:33:08 -0400
Bonjour Bertrand,

Thanks for providing more info on this bug.

I don't see a lot of K3b-specific errors in the log you added however, so I
wonder if the errors are coming from somewhere else instead.  Have you tried
other cd burning frontends (like gnomebaker for example) ?  Have you tried
using cdrecord and cdrdao directly to burn CDs ?

It's sometimes hard to track these problems down and I like to try to avoid
sending too many bugs to the K3b developer since he's got a lot of work
already :)

Francois

Information forwarded to debian-bugs-dist@lists.debian.org, Jean-Michel Kelbert <kelbert@debian.org>:
Bug#305551; Package k3b. (full text, mbox, link).

Acknowledgement sent to BmailDB <bmaildb@free.fr>:
Extra info received and forwarded to list. Copy sent to Jean-Michel Kelbert <kelbert@debian.org>. (full text, mbox, link).

Message #37 received at 305551@bugs.debian.org (full text, mbox, reply):

From: BmailDB <bmaildb@free.fr>
To: Francois Marier <francois@debian.org>
Cc: 305551@bugs.debian.org
Subject: Re: Bug#305551: K3b bug
Date: Fri, 9 Jun 2006 20:48:30 +0200
Le Mardi 6 Juin 2006 19:33, Francois Marier a écrit :
> Bonjour Bertrand,
>
> Thanks for providing more info on this bug.
>
> I don't see a lot of K3b-specific errors in the log you added
> however, so I wonder if the errors are coming from somewhere else
> instead.  Have you tried other cd burning frontends (like
> gnomebaker for example) ?  Have you tried using cdrecord and cdrdao
> directly to burn CDs ?
>
> It's sometimes hard to track these problems down and I like to try
> to avoid sending too many bugs to the K3b developer since he's got
> a lot of work already :)
>
> Francois

Bonsoir François,

I'm afraid K3b is quite involved.
I tried to burn CD or DVD with GnomeBaker, I tried to burn in command 
line with cdrecord and growisofs, everything is OK.
But as soon as K3b is used, all scsi / usb devices stop working.
By the way, while trying to start K9copy in command line, lots of 
lines beginning by "K3bDevice::Device ........" meaning some problems 
in accessing to cd or dvd devices.
Sorry, I can't provide, right now, the exact log (using another PC at 
this time).

Bonne soirée,
Bertrand

Information forwarded to debian-bugs-dist@lists.debian.org, Jean-Michel Kelbert <kelbert@debian.org>:
Bug#305551; Package k3b. (full text, mbox, link).

Acknowledgement sent to Francois Marier <francois@debian.org>:
Extra info received and forwarded to list. Copy sent to Jean-Michel Kelbert <kelbert@debian.org>. (full text, mbox, link).

Message #42 received at 305551@bugs.debian.org (full text, mbox, reply):

From: Francois Marier <francois@debian.org>
To: BmailDB <bmaildb@free.fr>
Cc: 305551@bugs.debian.org, control@bugs.debian.org
Subject: Re: Bug#305551: K3b bug
Date: Tue, 13 Jun 2006 22:29:42 -0400
reopen 305551 bmaildb@free.fr
forwarded 305551 http://bugs.kde.org/129123
thanks

Hi Bertrand,

I have forwarded your bug to the upstream developer.  Thanks for taking the
time to do this extra checking.

If you want to interact directly with the author, please visit the above
URL.

Francois

Bug reopened, originator set to bmaildb@free.fr. Request was from Francois Marier <francois@debian.org> to control@bugs.debian.org. (full text, mbox, link).

Noted your statement that Bug has been forwarded to http://bugs.kde.org/129123. Request was from Francois Marier <francois@debian.org> to control@bugs.debian.org. (full text, mbox, link).

Information forwarded to debian-bugs-dist@lists.debian.org, Jean-Michel Kelbert <kelbert@debian.org>:
Bug#305551; Package k3b. (full text, mbox, link).

Acknowledgement sent to Francois Marier <francois@debian.org>:
Extra info received and forwarded to list. Copy sent to Jean-Michel Kelbert <kelbert@debian.org>. (full text, mbox, link).

Message #51 received at 305551@bugs.debian.org (full text, mbox, reply):

From: Francois Marier <francois@debian.org>
To: 305551@bugs.debian.org
Subject: [sebastian@trueg.de: [Bug 129123] K3b hangs the USB/SCSI bus]
Date: Wed, 14 Jun 2006 12:25:53 -0400
Here's the response from the K3b developer.  You can answer his question
directly at :

  http://bugs.kde.org/show_bug.cgi?id=129123

Francois

------- Additional Comments From sebastian trueg de  2006-06-14 09:47 -------
is this really k3b 0.12.15 and if so, does 0.12.14 work?

Information forwarded to debian-bugs-dist@lists.debian.org, Jean-Michel Kelbert <kelbert@debian.org>:
Bug#305551; Package k3b. (full text, mbox, link).

Acknowledgement sent to Francois Marier <francois@debian.org>:
Extra info received and forwarded to list. Copy sent to Jean-Michel Kelbert <kelbert@debian.org>. (full text, mbox, link).

Message #56 received at 305551@bugs.debian.org (full text, mbox, reply):

From: Francois Marier <francois@debian.org>
To: 305551@bugs.debian.org
Subject: Problem reproduceable on K3b 0.12.17 ?
Date: Mon, 25 Sep 2006 20:37:59 -0400
Hi Bertrand,

The K3b developer was wondering whether you are still having this bug with
K3b 0.12.17 ?

Thanks,

Francois

Tags added: fixed-upstream Request was from bts-link-upstream@lists.alioth.debian.org to control@bugs.debian.org. (full text, mbox, link).

Reply sent to "Francois Marier" <francois@debian.org>:
You have taken responsibility. (full text, mbox, link).

Notification sent to bmaildb@free.fr:
Bug acknowledged by developer. (full text, mbox, link).

Message #63 received at 305551-done@bugs.debian.org (full text, mbox, reply):

From: "Francois Marier" <francois@debian.org>
To: 305551-done@bugs.debian.org
Subject: Fixed in K3b 1.0
Date: Tue, 17 Apr 2007 13:43:15 +1200
Version: 1.0

I don't believe that K3b 1.0 has this problem anymore since nobody has
reported it for a long time.

Please feel free to reopen the bug if it's still a problem for you.

Thanks,

Francois

No longer marked as fixed in versions 1.0. Request was from Andreas Beckmann <anbe@debian.org> to control@bugs.debian.org. (Fri, 01 Nov 2013 01:21:43 GMT) (full text, mbox, link).

Marked as fixed in versions k3b/1.0-1. Request was from Andreas Beckmann <anbe@debian.org> to control@bugs.debian.org. (Fri, 01 Nov 2013 01:21:43 GMT) (full text, mbox, link).

Bug archived. Request was from Debbugs Internal Request <owner@bugs.debian.org> to internal_control@bugs.debian.org. (Fri, 29 Nov 2013 07:37:55 GMT) (full text, mbox, link).

Send a report that this bug log contains spam.

Debian bug tracking system administrator <owner@bugs.debian.org>. Last modified: Mon Nov 6 20:54:51 2017; Machine Name: beach

Debian Bug tracking system

Debbugs is free software and licensed under the terms of the GNU Public License version 2. The current version can be obtained from https://bugs.debian.org/debbugs-source/.

Copyright © 1999 Darren O. Benham, 1997,2003 nCipher Corporation Ltd, 1994-97 Ian Jackson, 2005-2017 Don Armstrong, and many other contributors.